BIAMP MDS-INT Interface and PSU

248.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: H06AP00031 Category:
The BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 […]

 

Read more

The BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.

This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function).

The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting. Combined with the CMX20T ceiling speakers or MASK4 cabinet loudspeakers, you will have an astonishing voice clarity!

Weight 0.60 kg

Reviews

There are no reviews yet.

Be the first to review “BIAMP MDS-INT Interface and PSU”

Your email address will not be published. Required fields are marked *

Quick Comparison

BIAMP MDS-INT Interface and PSU removeAKG CS-5 PS12 Power supply for up to 40 microphone units removeTOA IR-510R INFRARED WIRELESS RECEIVER removeAKG CS 5 IRR7 Infrared receiver removeAKG CS 2DU Conference System removeAKG CS 5 IU Interpreter Station remove
NameBIAMP MDS-INT Interface and PSU removeAKG CS-5 PS12 Power supply for up to 40 microphone units removeTOA IR-510R INFRARED WIRELESS RECEIVER removeAKG CS 5 IRR7 Infrared receiver removeAKG CS 2DU Conference System removeAKG CS 5 IU Interpreter Station remove
Image
SKUH06AP00031CS 5 PS12IR-510RCS 5 IRR7CS 2DUCS 5 IU
Rating
Price 248.00 incl. GR VAT 260.00 incl. GR VAT 342.00 incl. GR VAT 345.00 incl. GR VAT 264.00 incl. GR VAT 1,650.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain. This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function). The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting. Combined with the CMX20T ceiling speakers or MASK4 cabinet loudspeakers, you will have an astonishing voice clarity!

Power (w/o IEC power cord) for up to 40 microphone units.

Supplied ceiling-mounting brackets facilitate installation.
Equipped with power indicator LED.
The IR-510R covers a practical radius of approx. 8 m.

Specification
Power Source 24V DC (Supplied from the optional IR-702T)
Current Consumption Max.60mA
Infrared Detector  
Wavelength 870nm
Carrier Frequency Channel A:3.100MHz/Channel B:3.350MHz
Reception Area Practical radius of approx. 8 m in a space without any obstacle
Connection Terminal 75 Ω, BNC jack
Operating Temperature 0ºC to +40ºC
Operating Humidity 30% to 85% RH
Finish Case: Polycarbonate resin, visible light cut filter Base: ABS resin, black
Dimensions 120 x 71.3 (H) mm
Weight 205g (unit only)

 

Rugged infrared receiver for up to seven selectable channels, for use with headphones, e.g., AKG K 77. Operates for more than 12 hours per battery charge.

The CS 5 IRR7 shall reproduce the floor channel and 6 translated languages. It shall have a 3,5mm stereo jack to connect any stereo headphone, a volume potentiometer and an easy selector switch. It shall have a built in NiMh rechargeable battery to supply the unit for up to 13 hours operation time. The unit shall switch off automatically when loosing the signal to save power. It shall be rechargeable with charging contacts on the housing.

 

 

  • Quick setup and takedown even of large systems
  • No operator training required
  • Superior audio quality
  • Voice activation or manual PTT control
  • Ease of use, high reliability

The CS 2 is the ideal solution for venues where no sound engineer is available permanently such as meeting rooms, town halls, etc. The central Base Unit controls microphone channels and a priority button allows one or more chairpersons to call the meeting to order. Two types of Microphone Units are available, the Chair Unit with a priority button (any number of Chair Units can be used in a system) and the Delegate Unit. Providing two loudspeakers, two headphone outputs, and a "Voice Zoom” function, each version can be used by two persons.
For permanent flush mounting e.g. in a tabletop an optional mounting frame CS 5 MF is available.

The CS 2 uses AKG's famous Modular Series capsules that connect to the Microphone Units via a GN 30 CS (approx. 12 in./30 cm) or GN 50 CS (approx. 20 in./50 cm) gooseneck. A rugged, threaded TRS mini jack with gold plated contacts ensures a firm, wobble-free mechanical joint and excellent electrical contact. Five different ready-to-use cables in standard lengths between 4 ft. (1.25 m) and 66 ft. (20 m) are available for connecting the individual Microphone Units together. This does not only save time but increases the reliability of the system. A range of optional accessories will solve any installation problem. With its wide variety of options, the CS 2 is more flexible than many "fully digital” systems. Plus, the AKG brand name stands for excellent sound and high reliability.

Bottom panel dip switches and pots on each Microphone Unit allow many functions to be adjusted individually.

  • Voice Activation threshold
  • Voice Activation hold time
  • Microphone automute after user stops talking
  • Enable/disable NOM limitation
  • Voice Activation ON/OFF
  • Priority level
  • “Voice Zoom” ON/OFF
  • Loudspeaker/headphones level reset or last setting
  • Adjustable compression

Interpreter station for use with selectable microphones. Four input channels selectable: floor, two pre-selected languages, relay. An external microphone input allows the station to be used either with a gooseneck microphone and separate headphones or a headset.

Gooseneck, capsule and connecting cable are not included.

The Interpreter unit CS 5 IU has to ensure the technical conditions that are needed for interpreters working in the interpreter booth. Its task is on one side to forward the floor voice or the voice of an other interpreter to the headphone of all the interpreters or to the loudspeakers that are incorporated into the interpreter unit, and on the other side to transmit the text translated by the interpreters to the relevant system channel with the aid of the incorporated microphone.

According to the international prescriptions two interpreter units have to be installed into an interpreter booth in order to allow the continuous working of two interpreters. The following functions must be enabled: listening to 2 preselected channels with the push of one button. Choosing any other channel using "up” and "down” buttons. Output to 2 preselected channels by the push of one button. Possibility to give a sign to the speech holder to slow down as well as to the technician to call for assistance. Input/Output shall be possible via gooseneck microphone and headphone or a suitable headset. The unit shall be connected in the data ring at any point.

 

 

Weight0.60 kg1.00 kg0.25 kg1.00 kg1.00 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.60 kg
Weight 1.00 kg
Weight 0.25 kg
Weight 1.00 kg
Weight 1.00 kg
Weight 3.00 kg