BIAMP MDS-INT Interface and PSU

248.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: H06AP00031 Category:
The BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 […]

 

Read more

The BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.

This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function).

The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting. Combined with the CMX20T ceiling speakers or MASK4 cabinet loudspeakers, you will have an astonishing voice clarity!

Weight 0.60 kg

Reviews

There are no reviews yet.

Be the first to review “BIAMP MDS-INT Interface and PSU”

Your email address will not be published. Required fields are marked *

Quick Comparison

BIAMP MDS-INT Interface and PSU removeAKG CS 5 VU DELEGATE UNIT HIGH END removeAKG CS 5 IU Interpreter Station removeTOA IR-510R INFRARED WIRELESS RECEIVER removeTOA TS-900 Central Unit removeAKG CS 2BU Base Station for up to 200 Microphone Stations remove
NameBIAMP MDS-INT Interface and PSU removeAKG CS 5 VU DELEGATE UNIT HIGH END removeAKG CS 5 IU Interpreter Station removeTOA IR-510R INFRARED WIRELESS RECEIVER removeTOA TS-900 Central Unit removeAKG CS 2BU Base Station for up to 200 Microphone Stations remove
Imagecs_2bu_b Base Station akg
SKUH06AP00031CS 5 VUCS 5 IUIR-510RTS-900CS 2BU
Rating
Price 248.00 incl. GR VAT 608.00 incl. GR VAT 1,650.00 incl. GR VAT 342.00 incl. GR VAT 1,042.00 incl. GR VAT 894.99 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

In stock

In stock

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain. This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function). The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting. Combined with the CMX20T ceiling speakers or MASK4 cabinet loudspeakers, you will have an astonishing voice clarity!
  • Choice of microphones for every kind of system and room acoustics. 
  •  Display and multifunction soft keys for ease of use.
  • Up to 63 language channels independently selectable for two users.
  • 1, 3, 5-way voting/polling function.
  • Dip-switch selectable president and delegate operating modes.

The CS 5 VU provides two operating modes, reducing the number of different components needed for a conference system.

In a small discussion system with CS 5 DU microphone stations, the chairperson would typically use a CS 5 VU. In President mode, it provides a priority function and allows the user to start votes or polls. The display will then indicate the time left for voting and the results.

In a larger conference system, the CS 5 VU can be used both by delegates and by the president. In delegate mode, it provides all voting and language selection functions independently for two delegates. A bank of dip switches allows the CS 5 VU to be set to President mode with priority and 1, 3, or 5-way voting/polling functions. In computer-controlled conference systems, chip-card identification is available as an option.

Gooseneck, capsule and connecting cable are not included.

The unit shall act as chairman unit or normal delegate unit, selectable by a dipswitch on the bottom of the housing. It shall have a built-in microphone and loudspeaker, which allow the forwarding of the voice of the speaker towards the other units of the system. The chairman shall always be able to start 1,3 and 5 step voting from the unit and monitor the results on the unitʼs  display. Priority calls shall also be possible from his unit.

The CS 5 VU is suitable for taking over maximum 63 interpreted languages and the room voice as well, which may be listened to through the headset that is connected to the device. A chip card reader is also included in the unit, with the aid of which it is possible to identify the user of the device in the case of a computer controlled conference.

The backlit graphic LC display facilitates using the device and displays its current status and the result of the vote. The unit shall operate for 2 persons simultaneously, with independent adjustable languages for each of the 2 x 3,5mm stereo jack headphone sockets.

 

 

Interpreter station for use with selectable microphones. Four input channels selectable: floor, two pre-selected languages, relay. An external microphone input allows the station to be used either with a gooseneck microphone and separate headphones or a headset.

Gooseneck, capsule and connecting cable are not included.

The Interpreter unit CS 5 IU has to ensure the technical conditions that are needed for interpreters working in the interpreter booth. Its task is on one side to forward the floor voice or the voice of an other interpreter to the headphone of all the interpreters or to the loudspeakers that are incorporated into the interpreter unit, and on the other side to transmit the text translated by the interpreters to the relevant system channel with the aid of the incorporated microphone.

According to the international prescriptions two interpreter units have to be installed into an interpreter booth in order to allow the continuous working of two interpreters. The following functions must be enabled: listening to 2 preselected channels with the push of one button. Choosing any other channel using "up” and "down” buttons. Output to 2 preselected channels by the push of one button. Possibility to give a sign to the speech holder to slow down as well as to the technician to call for assistance. Input/Output shall be possible via gooseneck microphone and headphone or a suitable headset. The unit shall be connected in the data ring at any point.

 

 

Supplied ceiling-mounting brackets facilitate installation.
Equipped with power indicator LED.
The IR-510R covers a practical radius of approx. 8 m.

Specification
Power Source 24V DC (Supplied from the optional IR-702T)
Current Consumption Max.60mA
Infrared Detector  
Wavelength 870nm
Carrier Frequency Channel A:3.100MHz/Channel B:3.350MHz
Reception Area Practical radius of approx. 8 m in a space without any obstacle
Connection Terminal 75 Ω, BNC jack
Operating Temperature 0ºC to +40ºC
Operating Humidity 30% to 85% RH
Finish Case: Polycarbonate resin, visible light cut filter Base: ABS resin, black
Dimensions 120 x 71.3 (H) mm
Weight 205g (unit only)

 

  • System Features and Outline
  • Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
  • Operations such as giving speech permission can be done from the operation PC. *Custom design.
  • The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
  • All speeches during the conference can be recorded clearly.
  • Sub audio(Japanese interpretation) is not recorded.
  • Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
  • Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified

SPECIFICATIONS:

Power Source 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory))
Power Consumption 72W
Input MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack
Output REC: -20 dB*, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack
Number of Connectable Chairman/Delegate Units 64 units
Number of Connectable Infrared Transmitter/Receiver Units 4 units (up to 16 units by using four Distributors)
Infrared Transmitter/Receiver I/O Terminal 4 BNC jacks
External Control Terminal D-sub connector (9 P, male)
LED Indicator Voting result indicators 1-3 (7-segment LED, double-digit number), Audio signal receiving indicators 1-4 CH, Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge)
Function Switch Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units)
Microphone Mix/Cut Switch (for the Base Language) MIC/CUT (Mix): Chairman/Delegate units + MIC 1+ AUX 1 +AUX 3 → Base Language (Cut): MIC 1 + AUX 1 + AUX 3→ Base Language
Microphone Mix/Cut Switch (for the Translation Language) MIC/CUT (Mix): Chairman/Delegate units + MIC 2 + AUX 2 + AUX 3 → Translation Language (Cut): MIC 2 + AUX 2 + AUX 3→Translation Language
AUX 3 Mixing Select Switch MIC/CUT (Mix): AUX 3 input is relayed to the line output. (Cut): AUX 3 input is not relayed to the line output.
Operating Temperature 0º to+40º
Finish Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss
Weight 2.7kg
Accessory AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1
Option Rack mounting bracket: MB-TS900
  *0dB=1V

 

  • Base Station for up to 200 Microphone Stations
  • Intuitive controls
  • Superior audio quality
  • Voice activation and NOM limitation
  • Standard ins and outs for external equipment
The CS 2 Base Station controls up to 200 Microphone Stations and provides automatic NOM (Number of Open Microphones) attenuation. System gain will decrease by approx. 3 dB every time the number of open microphone doubles. The result is a substantially lower risk of feedback even if the number of open microphones varies constantly. A selectable Voice Activation function turns the microphones on automatically as soon as they are talked into. The NOM Limitation function allows the number of simultaneously open microphones to be limited to one, two, three, four, or five. This function can be locally disabled on each Microphone Station so a specific microphone, e.g., one mounted on a lectern, will come on every time, no matter how many mics may be open already.
Weight0.60 kg1.00 kg3.00 kg0.25 kg2.70 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.60 kg
Weight 1.00 kg
Weight 3.00 kg
Weight 0.25 kg
Weight 2.70 kg
Weight 3.00 kg