BIAMP MDS-INT Interface and PSU

248.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: H06AP00031 Category:
The BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 […]

 

Read more

The BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.

This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function).

The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting. Combined with the CMX20T ceiling speakers or MASK4 cabinet loudspeakers, you will have an astonishing voice clarity!

Weight 0.60 kg

Reviews

There are no reviews yet.

Be the first to review “BIAMP MDS-INT Interface and PSU”

Your email address will not be published. Required fields are marked *

Quick Comparison

BIAMP MDS-INT Interface and PSU removeAKG CS 5 IRR7 Infrared receiver removeTOA TS-770 CONFERENCE CENTRAL UNIT removeAKG CS 5 IU Interpreter Station removeAKG CS 2DU Conference System removeAKG CS 5 VU DELEGATE UNIT HIGH END remove
NameBIAMP MDS-INT Interface and PSU removeAKG CS 5 IRR7 Infrared receiver removeTOA TS-770 CONFERENCE CENTRAL UNIT removeAKG CS 5 IU Interpreter Station removeAKG CS 2DU Conference System removeAKG CS 5 VU DELEGATE UNIT HIGH END remove
Image
SKUH06AP00031CS 5 IRR7TS-770CS 5 IUCS 2DUCS 5 VU
Rating
Price 248.00 incl. GR VAT 345.00 incl. GR VAT757.28 incl. GR VAT 1,650.00 incl. GR VAT 264.00 incl. GR VAT 608.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Available on backorder

In stock

In stock

AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain. This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function). The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting. Combined with the CMX20T ceiling speakers or MASK4 cabinet loudspeakers, you will have an astonishing voice clarity!

Rugged infrared receiver for up to seven selectable channels, for use with headphones, e.g., AKG K 77. Operates for more than 12 hours per battery charge.

The CS 5 IRR7 shall reproduce the floor channel and 6 translated languages. It shall have a 3,5mm stereo jack to connect any stereo headphone, a volume potentiometer and an easy selector switch. It shall have a built in NiMh rechargeable battery to supply the unit for up to 13 hours operation time. The unit shall switch off automatically when loosing the signal to save power. It shall be rechargeable with charging contacts on the housing.

 

 

The new TS-770 Series Conference System is ideal for conferences and meetings in government,  corporate, educational and hotel applications. The new system provides communications for conferences and boardrooms. The easy to use TS-770 Series is comprised of the TS-770 Central Unit supporting up to 70 chairperson / delegate stations. The new TS-770 Series conference system is backed with a five year product warranty.
 

 

Features

  • Easy to set up and operate
  • Up to 70 Chairperson/Delegate stations per TS-770 Central Unit
  • Supports system expansion up to (3) TS-770 Central Units for a total of 210 Chairperson/Delegate stations in one system
  • Telephone or PC Remote Delegate station operation using the TS-775
  • All Microphones ON Record function
  • External source inputs and PA/record outputs
  • System Test function
  • Five year warranty

Interpreter station for use with selectable microphones. Four input channels selectable: floor, two pre-selected languages, relay. An external microphone input allows the station to be used either with a gooseneck microphone and separate headphones or a headset.

Gooseneck, capsule and connecting cable are not included.

The Interpreter unit CS 5 IU has to ensure the technical conditions that are needed for interpreters working in the interpreter booth. Its task is on one side to forward the floor voice or the voice of an other interpreter to the headphone of all the interpreters or to the loudspeakers that are incorporated into the interpreter unit, and on the other side to transmit the text translated by the interpreters to the relevant system channel with the aid of the incorporated microphone.

According to the international prescriptions two interpreter units have to be installed into an interpreter booth in order to allow the continuous working of two interpreters. The following functions must be enabled: listening to 2 preselected channels with the push of one button. Choosing any other channel using "up” and "down” buttons. Output to 2 preselected channels by the push of one button. Possibility to give a sign to the speech holder to slow down as well as to the technician to call for assistance. Input/Output shall be possible via gooseneck microphone and headphone or a suitable headset. The unit shall be connected in the data ring at any point.

 

 

  • Quick setup and takedown even of large systems
  • No operator training required
  • Superior audio quality
  • Voice activation or manual PTT control
  • Ease of use, high reliability

The CS 2 is the ideal solution for venues where no sound engineer is available permanently such as meeting rooms, town halls, etc. The central Base Unit controls microphone channels and a priority button allows one or more chairpersons to call the meeting to order. Two types of Microphone Units are available, the Chair Unit with a priority button (any number of Chair Units can be used in a system) and the Delegate Unit. Providing two loudspeakers, two headphone outputs, and a "Voice Zoom” function, each version can be used by two persons.
For permanent flush mounting e.g. in a tabletop an optional mounting frame CS 5 MF is available.

The CS 2 uses AKG's famous Modular Series capsules that connect to the Microphone Units via a GN 30 CS (approx. 12 in./30 cm) or GN 50 CS (approx. 20 in./50 cm) gooseneck. A rugged, threaded TRS mini jack with gold plated contacts ensures a firm, wobble-free mechanical joint and excellent electrical contact. Five different ready-to-use cables in standard lengths between 4 ft. (1.25 m) and 66 ft. (20 m) are available for connecting the individual Microphone Units together. This does not only save time but increases the reliability of the system. A range of optional accessories will solve any installation problem. With its wide variety of options, the CS 2 is more flexible than many "fully digital” systems. Plus, the AKG brand name stands for excellent sound and high reliability.

Bottom panel dip switches and pots on each Microphone Unit allow many functions to be adjusted individually.

  • Voice Activation threshold
  • Voice Activation hold time
  • Microphone automute after user stops talking
  • Enable/disable NOM limitation
  • Voice Activation ON/OFF
  • Priority level
  • “Voice Zoom” ON/OFF
  • Loudspeaker/headphones level reset or last setting
  • Adjustable compression
  • Choice of microphones for every kind of system and room acoustics. 
  •  Display and multifunction soft keys for ease of use.
  • Up to 63 language channels independently selectable for two users.
  • 1, 3, 5-way voting/polling function.
  • Dip-switch selectable president and delegate operating modes.

The CS 5 VU provides two operating modes, reducing the number of different components needed for a conference system.

In a small discussion system with CS 5 DU microphone stations, the chairperson would typically use a CS 5 VU. In President mode, it provides a priority function and allows the user to start votes or polls. The display will then indicate the time left for voting and the results.

In a larger conference system, the CS 5 VU can be used both by delegates and by the president. In delegate mode, it provides all voting and language selection functions independently for two delegates. A bank of dip switches allows the CS 5 VU to be set to President mode with priority and 1, 3, or 5-way voting/polling functions. In computer-controlled conference systems, chip-card identification is available as an option.

Gooseneck, capsule and connecting cable are not included.

The unit shall act as chairman unit or normal delegate unit, selectable by a dipswitch on the bottom of the housing. It shall have a built-in microphone and loudspeaker, which allow the forwarding of the voice of the speaker towards the other units of the system. The chairman shall always be able to start 1,3 and 5 step voting from the unit and monitor the results on the unitʼs  display. Priority calls shall also be possible from his unit.

The CS 5 VU is suitable for taking over maximum 63 interpreted languages and the room voice as well, which may be listened to through the headset that is connected to the device. A chip card reader is also included in the unit, with the aid of which it is possible to identify the user of the device in the case of a computer controlled conference.

The backlit graphic LC display facilitates using the device and displays its current status and the result of the vote. The unit shall operate for 2 persons simultaneously, with independent adjustable languages for each of the 2 x 3,5mm stereo jack headphone sockets.

 

 

Weight0.60 kg1.00 kg5.00 kg3.00 kg1.00 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.60 kg
Weight 1.00 kg
Weight 5.00 kg
Weight 3.00 kg
Weight 1.00 kg
Weight 1.00 kg