| Content | BIAMP CMAR-6T-W
The CMAR6T marine speaker will bring high quality sound, even in the most difficult humid places. In these humid environments the selection of speaker components is limited to just a few, mostly not the best in audiophile performance. However we achieved to solve the material challenge and are able to bring you a marine speaker that offers a superb sound.
The CMART Marine Series has 3 different models in 5” (CMAR5T-W), 6” (CMAR6T-W) and 8” (CMAR8T-W). These loudspeakers are especially developed to be installed in humid or hot (up to 95° C) environments like swimming pools, yachts, bathrooms, saunas …
This new Apart waterproof marine speaker is already equipped with a 20 watts transformer (T20iP) what makes this waterproof speaker suited for low impedance as well as 100 volt systems.
Specifications:
- Outside diameter: 190 mm
- Depth: 61 mm
- Cutout: 151 mm
- Loudspeaker system: 2-way
- Woofer size: 6.5”
- Tweeter size: 1”
- Woofer cone material: Polypropylene
- Impedance: 8 Ohms
- Power 8 Ohms: 60 W
- 100V Powertaps: 20 – 10 – 5 – 21.5 W
- SPL 1W/1m: 89 dB
- SPL @1m: 104 dB
- Frequency response: 78 – 20 kHz
- Material grill: Steel (Stainless)
- Material construction: ABS
- IP rating: IP65
- Vertical dispersion angle: 180°
- Low Impedance: YES
- 100V: YES
- Mounting: 4 screws
|
The entry-point in the CI600 in-ceiling range, the CCM665 is perfect for smaller listening areas like bathrooms or kitchens. The speaker features a 150mm (6in) woven glassfibre bass/midrange driver and a soft dome tweeter. QuickDogs™ and plug-and-play functionality make installation a breeze. |
2-way recessed ceiling speaker
The IC 82 is the larger of two strong-sounding built-in ceiling loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound.
The two built-in coaxial tweeters make two circuit versions possible – sound directed over a wide area or at specific points. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease.
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
100 / 180 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
4 – 8 Ohms
Frequency Response
32 - 35000 Hz
Crossover Frequencies
3500 Hz
Recommended Amplifier Output
20 - 180 Watts
Outer Dimensions Ø
272 mm
Cutting Out Ø
238 mm
Mounting depth
100 mm
|
Outer flange (grille) diameter | Metric :8-5/16" | 21.04 cm
Cut out diameter | Metric :7-1/4" | 18.4 cm
Depth from flange | Metric :3-5/8" | 9.07 cm
Driver complement :Two 3/4-inch (20mm) pivoting Aluminum dome tweeters axially aligned with a 6-1/2" (16.5 cm) dual voice coil (stereo) BDSS bass/midrange driver
Frequency response :26Hz - 30kHz
Impedance :4 - 8 ohms
Sensitivity :90 dB
Recommended associated amplifier power :10 - 125 WPC
Inputs :Two pair (left and right channels) of gold plated heavy-duty spring-loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Warranty :5 years
Weight | Metric :4.4 lb. | 2.14kg
|
Outer flange (grille) diameter | Metric :7-3/8" | 18.62 cm
Cut out diameter | Metric :6-5/16" | 16 cm
Depth from flange | Metric :3-5/8" | 9.04 cm
Driver complement :1-inch (25mm) pivoting Aluminum dome tweeter axially aligned with a 5-1/4" (13.3 cm) BDSS bass/midrange driver
Frequency response :28Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :89 dB
Recommended associated amplifier power :10 - 175 WPC
Inputs :One pair of gold plated heavy-duty spring-loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker per carton
Warranty :5 years
Weight | Metric :3.7 lb. | 1.67kg each |
Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.
Sensitivity (SPL) 86dB (2.83 Vrms input)
Frequency response 120Hz – 20kHz
Impedance 8 Ohms compatible
Recommended amplifier power 15-200 Watts
Drivers 1 x 2.25ʼʼ (57mm) BMR driver
Dimensions 98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight 0.46kg (1.01 lbs)
Key Features
Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
IP65 rated for suitability in high humidity and dusty environments
Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
Metal back box integrated into the product
Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole
|
Reviews
There are no reviews yet.