Content | BIAMP CMAR-6T-W
The CMAR6T marine speaker will bring high quality sound, even in the most difficult humid places. In these humid environments the selection of speaker components is limited to just a few, mostly not the best in audiophile performance. However we achieved to solve the material challenge and are able to bring you a marine speaker that offers a superb sound.
The CMART Marine Series has 3 different models in 5” (CMAR5T-W), 6” (CMAR6T-W) and 8” (CMAR8T-W). These loudspeakers are especially developed to be installed in humid or hot (up to 95° C) environments like swimming pools, yachts, bathrooms, saunas …
This new Apart waterproof marine speaker is already equipped with a 20 watts transformer (T20iP) what makes this waterproof speaker suited for low impedance as well as 100 volt systems.
Specifications:
- Outside diameter: 190 mm
- Depth: 61 mm
- Cutout: 151 mm
- Loudspeaker system: 2-way
- Woofer size: 6.5”
- Tweeter size: 1”
- Woofer cone material: Polypropylene
- Impedance: 8 Ohms
- Power 8 Ohms: 60 W
- 100V Powertaps: 20 – 10 – 5 – 21.5 W
- SPL 1W/1m: 89 dB
- SPL @1m: 104 dB
- Frequency response: 78 – 20 kHz
- Material grill: Steel (Stainless)
- Material construction: ABS
- IP rating: IP65
- Vertical dispersion angle: 180°
- Low Impedance: YES
- 100V: YES
- Mounting: 4 screws
|
Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.
Sensitivity (SPL) 86dB (2.83 Vrms input)
Frequency response 120Hz – 20kHz
Impedance 8 Ohms compatible
Recommended amplifier power 15-200 Watts
Drivers 1 x 2.25ʼʼ (57mm) BMR driver
Dimensions 98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight 0.46kg (1.01 lbs)
Key Features
Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
IP65 rated for suitability in high humidity and dusty environments
Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
Metal back box integrated into the product
Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole
| The CCM362 is a two way, in-ceiling loudspeaker.
The CCM362 is a two-way in-ceiling loudspeaker, balanced for wide-angle listening. It comes with a choice of round or square baffles, and like all the models in the CI 300 Series it features an elegant minimal-width border design.
It features a 1 x 160mm (6in) Polypropylene cone bass/midrange driver, and a 1 x 25mm (1in) soft dome tweeter.
All the models in the CI 300 Series are capable of offering great sound in high-humidity environments such as indoor swimming pools.
*Package includes x2 CCM362 speakers |
Audiophile Performance, Cutting-Edge Stealth Design
Stacking the woofer behind the driver unit is an innovation so extreme you wonʼt believe the performance that results! Full-size speaker dynamics and a small-diameter cut-out built-in that virtually disappears into your decor. The Vanishing Series puts high performance stealth audio at your fingertips.
Vanishing 700-LS Features:
Extra deep well design with a Cassini oval woofer mounted above and behind the main driver & tweeter array, for broad coverage and dynamic full-range audio performance in a built-in.
Vanishing® Series built-in speakers feature our exclusive wafer-thin Sheer-Grille™, a magnetically-secured grille that protrudes only 7mm from its surroundings. Sheer-Grilles have nearly transparent, ultra-small perfs, and are acoustically inert, for dynamic, unimpeded sound and more uniform coverage, even in larger rooms.
Painted to match your décor, Vanishing Series built-in speakers are virtually indistinguishable from their surroundings.
Enhanced, reengineered ring radiator tweeters extend top-end response for incredible details and realistic imaging.
Reflective surfaces in rooms can make sound brighter and cause image distortion. Engaging the Vanishing reflective room compensation feature (by selecting the low setting) lowers the tweeter level to compensate for reflective surfaces. Vanishing reflective room compensation is a custom audio control that cuts the level only in the 4-5kHz range, exactly where reflectivity destroys sound quality. Outside this narrow 1kHz band, the tweeter retains its detailed and accurate high frequency response, for no loss of realistic musical details.
Vanishing Series LS speakers are timbre-matched to Polk LSi speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
If positioning limitations demand that your loudspeakers be installed closer than 2 feet from side walls, the proximity of the surface can result in a response bump between 50 and 200Hz. This can create boomy sound. The Vanishing wall distance toggle switch is a custom audio control that adjusts the crossover to flatten response and tune out boominess, without sacrificing deep bass response, for more lifelike sound and more flexible placement.
Dual bandpass bass ports are highly efficient in small enclosures, and smoothly funnels the angled wooferʼs low frequencies down around the driver array, eliminating "chuffing,” so your small, practically invisible in-ceiling speakers achieve superior full-range blending and broad coverage with surprisingly deep bass.
Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.
All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industryʼs most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime.
Tweeter ¾" ring radiator x 1
Midrange ½" APP driver x 2
Mid/Woofer 5“x7" mineral filled polypro. x 1
Frequency Response 32 Hz - 27 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 10-150 W/ Channel
Efficiency 90 dB
Dimensions(cm) 20.64 x 21.59
Driver Complement
Tweeter
Quantity 1
Diameter 3/4" (1.91cm)
Type Ring radiator
Midrange
Quantity 1
Diameter 2 1/2" (6.35cm)
Type Dynamic Balance driver with aerated polypropylene cone
Subwoofer
Quantity 1
Diameter 7" (17.78cm)
Type Dynamic Balance woofer with mineral-filled polypropylene cone
Electrical
Total Frequency Response 32Hz-33kHz
Upper -3dB Limit 29 kHz
Lower -3dB Limit 45 Hz
Nominal Impedance 8 ohms
Efficiency 90 dB
Recommended Amplifier Power 10-150 watts per channel
Inputs Gold-plated spring-loaded posts
Dimensions
Cut-Out Diameter 6 1/2" (16.51cm)
Overall Diameter 8 1/8" (20.64cm)
Mounting Depth (includes 1/2" drywall) 8" (20.32cm)
Pre-Construction Bracket PB SC50
Overall Depth 8 1/2" (21.59cm)
Shipping
Unit of Measure each
Total Shipping Weight 8 pounds
Warranty
Speaker Warranty Lifetime
|
Smaller size outdoor speaker system that combines quality and durability, and provides a wide variety of installation options.
MAIN FEATURES
- Flexible installation options with supplied mounting brackets
- Weather resistant 5-way binding post speaker terminals
- Powder-coated aluminum speaker grilles
- Supplied rubber feet for desktop/bookshelf placement
- Wide range of applications for home theaters, small commercial spaces and public buildings
- Three models (each a different size) to meet all types of application requirements
Selling Unit | Pair | Type | 2-way acoustic suspension | Featured Technologies | - | Tweeter | 3/4' fluid-cooled, coated soft dome | Midrange | - | Selling Unit | Pair | Type | 2-way acoustic suspension | Woofer | 5-1/4' waterproof cone | Power | 120 W / 40 W | Featured Technologies | - | Tweeter | 3/4' fluid-cooled, coated soft dome | Resistance | 6 Ohms | Frequency Response | 60 Hz-25 kHz | Midrange | - | Sensitivity | 86 dB/2.83 V/1 m | Crossover Frequencies | - | Woofer | 5-1/4' waterproof cone | Auto Standby Operation | - | Filters | - | Power | 120 W / 40 W | Resistance | 6 Ohms | Magnetic Shielded | - | Remote Control | - | Frequency Response | 60 Hz-25 kHz | Sensitivity | 86 dB/2.83 V/1 m | Power Consumption | - | Power Consumption in Standby Mode | - | Crossover Frequencies | - | Auto Standby Operation | - | Dimensions (W x H x D) | 6-3/4' x 10-3/4' x 5-3/8' | Weight | 4kg/piece | Filters | - | Magnetic Shielded | - | Remote Control | - | Power Consumption | - | Power Consumption in Standby Mode | - | Dimensions (W x H x D) | 6-3/4' x 10-3/4' x 5-3/8' | Weight | 4kg/piece |
|
2 x 2-way high-end recessed speaker
This built-in ceiling loudspeaker with particularly high-quality workmanship follows all the major parameters of Magnat´s Quantum technology. Just like the classic home-audio boxes, the ICQ 262 has also been equipped with bass/mid-range cones made from highly stable and torsion-resistant ceramic-aluminium. This material results in extremely accurate reproduction and reveals even the finest of acoustic details.
This special model possesses two angularly disposed tweeters as well as an additional three-way treble level adjustment and, thanks to the dual voice coil and switch, may be used in mono and stereo mode. Cascading also is possible.
Principle
2 x 2 way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
100 / 180 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
2 x 4 Ohm
Frequency Response
34 – 26000 Hz
Crossover Frequencies
4.000 Hz
Recommended Amplifier Output
20 - 200 Watts
Outer Dimensions Ø
220 mm
Cutting Out Ø
193 mm
Mounting depth
98 mm
Weight
1.4 kg
|
Reviews
There are no reviews yet.