Content | Waterproof 2-Way Built-in Loudspeaker
- Size: 6.5“
- Woofer & tweeter
- Grid made of seawater resistant V4A steel
- Impedance: 8 Ω
- Rated power: 60 W
- Design: Round
- Protection class: IP65
- Colour: Signal White (Ral 9003)
|
* Frequency Response (-10 dB)1: 150 Hz - 20 kHz
* Frequency Range (±3 dB)1: 200 Hz - 17 kHz
* Power Capacity:
o 50 Watts Continuous Program Power (2 hrs)
o 25 Watts Continuous Pink Noise (2 hrs)
o 30 Watts Continuous Program Power (100 hrs)
o 15 Watts Continuous Pink Noise (100 hrs)
* Nominal Sensitivity:
o 87 dB (4.0 V, 1 W)
o 84 dB (2.83 V)
* Nominal Coverage Angle3: 140° (+25°/-50°)
* Directivity (Q): 4.7
* Directivity Index (DI): 6.2 dB
* Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
* Rated Impedance: 16 ohms (no transformer taps)
* Recommended High-Pass Frequency: 150 Hz
Transducer
* Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
Enclosure
* Enclosure Material: High impact polystyrene
* Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
* Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
* Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
* Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
* Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
* Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
* Net Weight (ea): 0.7 kg (1.5 lbs)
* Shipping Weight (pair): 2.0 kg (4.3 lbs)
* Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
|
Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Freq. Response: 30 Hz - 30 kHz,
Impedance: 8 Ohms Rec. Ampl. Power: 10 - 250 watts
Inputs: One pair of gold plated spring loaded posts, Finishes: Paintable White
Outer Dimensions: 29.2 x 29.2 x 14.9cm
Cut Out Dimensions: 26.4 x 26.4 x 14.9cm
Driver Complement |
---|
Tweeter | Quantity | 1 | Diameter | 1" (2.54cm) | Type | Pure Aluminum Dome | Mid / Woofer | Quantity | 2 | Diameter | 4 1/2" (11.43cm) | Type | High Definition Bass/Midrange Driver | Bass Radiator | Quantity | 2 | Diameter | 5 1/4" (13.34cm) | Type | Planar Bass Radiator |
Electrical |
---|
Audio Inputs | Speaker Level | 1 Pair (Heavy Duty Spring Loaded) | Maximum Sensitivity | 1 watt @ 1 Meter | 92 dB | Total Frequency Response | Overall | 30 Hz - 30 kHz | Nominal Impedance | Compatible with | 8 ohm | Crossover | A/V Receiver Crossover Setting | Small (60 Hz) | Power Handling | 10 - 250 watts per channel |
Installation |
---|
Cut Out Dimensions | Height | 10 3/8" (26.35cm) | Width | 10 3/8" (26.35cm) | Mounting Depth | 5 7/8" (14.92cm) | Grille Dimensions | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Outer Flange | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Placement | Orientation | In Ceiling | Cabinet Type | Speaker Enclosure | Sealed Medite |
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
Features:
Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker. Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil. High power handling of 400 Watts with high sensitivity provides high SPL capability. The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws.
Specifications:
Frequency Response 30 Hz - 4.5 kHz, -10dB Maximum Power Handling 600 Watts, long term 1000 Watts, 2 hrs. (pink noise) Impedance 8 Ohms SPL 121dB continuous, 124dB peak, long term Beamwidth Not Applicable Horizontal Beamwidth Not Applicable Vertical Beamwidth Not Applicable Directivity Not Applicable Construction Kevlar Reinforced Cone Magnet Saturated-gap Voice Coil 3" Dimensions (HxWxD) 14.4 x 14.4 x 6.3" (366 x 366 x 160mm) Weight 17 lb (7.7 kg)
|
Reviews
There are no reviews yet.