BIAMP CMSQ-108 loudspeaker ceiling

2-way recessed ceiling speaker

The IC 62 is the smaller of two strong-sounding built-in ceiling loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound.

The two built-in coaxial tweeters make two circuit versions possible – sound directed over a wide area or at specific points. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease.

 
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
75 / 140 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 – 8 Ohms
Frequency Response
35 – 35000 Hz
Crossover Frequencies
3500 Hz
Recommended Amplifier Output
20 - 140 Watts
Outer Dimensions Ø
228 mm
Cutting Out Ø
195 mm
Mounting depth
80 mm

The CCM664 features an adjustable, tilt-offset 25mm (1in) soft dome tweeter, and a 150mm (6in) woven glassfibre bass/midrange driver. Quick and easy to install, the speaker also incorporates a three-position EQ switch for a better off-axis response. A cost-effective route to high quality ceiling mount sound.

Outer flange (grille) diameter | Metric :5-3/8" | 13.55 cm
Cut out diameter | Metric :4-1/2" | 11.5 cm
Depth from flange | Metric :3-3/8" | 8.64 cm
Driver complement :3/4" (20mm) pivoting aluminum dome tweeter axially aligned with a 4-1/2" (11.4 cm) BDSS bass/midrange driver
Frequency response :35 Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :88 dB
Recommended associated amplifier power :10 - 150 WPC
Inputs :One pair of gold plated heavy duty spring loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Weight | Metric :2.6 lb. | 1.16kg
Warranty :5 years

2x2-way recessed ceiling speaker

As a recessed ceiling speaker, the ICP 262 has a special place in the Interior Performance series. It has two 19 mm tweeters arranged at a fixed angle and 3-way treble level adjustment. Due to the dual voice coil, the ICP 262 can run in both mono and stereo mode. As a result, most installation situations can be handled successfully.

Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy.

 
Principle
2 x 2 way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
70 / 120 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
2 x 8 Ohm
Frequency Response
36 – 24000 Hz
Crossover Frequencies
4.000 Hz
Recommended Amplifier Output
20 - 140 Watts
Outer Dimensions Ø
233 mm
Cutting Out Ø
198 mm
Mounting depth
88 mm
Weight
1.3 kg

Outer flange (grille) diameter | Metric :8-5/16" | 21.04 cm
Cut out diameter | Metric :7-1/4" | 18.4 cm
Depth from flange | Metric :3-5/8" | 9.07 cm
Driver complement :Two 3/4-inch (20mm) pivoting Aluminum dome tweeters axially aligned with a 6-1/2" (16.5 cm) dual voice coil (stereo) BDSS bass/midrange driver
Frequency response :26Hz - 30kHz
Impedance :4 - 8 ohms
Sensitivity :90 dB
Recommended associated amplifier power :10 - 125 WPC
Inputs :Two pair (left and right channels) of gold plated heavy-duty spring-loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Warranty :5 years
Weight | Metric :4.4 lb. | 2.14kg