| Content | For a long time, installers worldwide have been unhappy with consumer electronics and they were looking for a professional integrated amplifier for use in commercial environments, boardrooms or small businesses designed for 24/7 operation. Therefore Apart developed the CONCEPT1, a stereo or two mono channel (2 x 80 watts @ 4 ohms) amplifier for small and medium-sized projects.
This CONCEPT1 2-zone integrated stereo amplifier can operate with one stereo zone, two volume-linked mono zones or two individual-volume mono zones. The unit can be controlled via RS232 what makes integration into your AV solution possible. The built-in limiters and system design guarantee a failsafe solution 24 hours a day, 7 days a week.
To make the life of the end-user as easy as can be, the CONCEPT1 has user settings and installer settings. Only the absolute
| 19" (483 mm wide) rack mounting |
Yes |
height- rack units (1U=44 mm) |
2 U |
| depth (build in) |
293 mm |
power supply |
230 VAC volts |
| power consumption (max) |
< 200 watts |
output power RMS 4 ohms |
2 x 80 watts |
| output power RMS 8 ohms |
2 x 60 watts |
music program power |
100 watts |
| minimum impedance load |
4 ohms |
zone outputs |
2 |
| MIC inputs balanced |
1 |
line input unbalanced |
4 |
| tone control |
Yes |
RS232 (serial communication port) |
Yes |
| priority switch |
2 |
priority levels |
1 |
| cooling system |
convection |
applicable low impedance |
Yes |
|
Technical Specifications
Continuous power output, per channel, 8Ω
- Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
- Single, 4Ω, at 1kHz - 400W
Inputs
- Nominal sensitivity for 200W / 8Ω - 1.15V (RCA), 2.3V (XLR)
- Input impedance - 10kΩ
- Frequency response 20Hz-20kHz +/- 0.05dB
- Signal/noise ratio (Awtd) 50W / 8Ω - 110dB
General
- Power consumption (standby) -
|
Designed for excellent sound quality, with a beautiful appearance.
An integrated amplifier with the advantage of digital input.
ToP-ART (Total Purity Audio Reproduction Technology) and high quality parts
- I/O (input to output) Direct Symmetrical Design
- ART (Anti-Resolution and Tough) Base
- Custom-made power transformer / 6,800uF block capacitors / Aluminum-extruded heat sinks
95W x 2 (max), 60W x 2 (RMS) high power output
Pure Direct Mode for Greater Sound Purity
Continuous Variable Loudness Control
Digital audio inputs for TV or Blu-ray Player
Connection for YBA-11 Bluetooth Wireless Adapter
Simple yet sophisticated design (aluminium front panel and knobs)
Auto Power Standby |
High rigidity metal frame
Shielded high current power supply
• 500VA toroidal transformer
• 80.000uF capacitor bank
• Rubber insulated aluminium feet
• WBT connector on unbalanced input
• Neutrik connector on balanced input
• Fully discrete analogue design
• Onsemi MJL1302/3281 power transistor
• Low overall feedback
• High stability on capacitive loads
• White Gold cable on output connection
• 100W/8Ohm power unit and double the
power on 4 Ohm until 390W on 2Ohm; a
big power reserve that allows to drive any loudspeakers even in a big room.
|
First Impressions
If youʼre impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting – and very positive – impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any décor. The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace” view of the amplifierʼs operating status.
| Front Panel | Aluminum/Glass-reinforced resin |
| Power Requirement | AC 120V 60Hz |
| Power Consumption | 330W (Standby: 0.2W) |
| Dimensions W x H x D (Inchs) | 17-3/8 x 4-15/16 x 13-7/8 |
|
Ti 120 SIGN.
Special power and output transformer
from BHS uk and Mundof M-Cap
signal capasitors
Integrated tube amp.Four line inputs.
2X12AU7, 4x KT 88, 2x12AX7
2x6SN7 75 Wrms per chan.4-8 ohm.
Class AB push-pull.Remote control inc.
Negative feedback on/of switch.
|
echnical specification
|
| |
|
Integrated Amplifier
| |
Frequency response:
|
10 Hz - 50 kHz (± 0.5 dB)
| |
Total harmonic distortion (THD):
|
1 % (1 kHz)
| |
Signal-to-noise ratio:
|
92 dB
| |
Input Impedance:
|
100 kOhm
| |
|
| |
Vacuum tube:
|
4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7
| |
Dimensions W x H x D:
|
440 x 220 x 390 mm
| |
Weight:
|
28 kg
| |
Accessories:
|
Remote Control
| |
Input Terminals:
|
Tape, CD, AUX, Tuner
| |
Output terminals:
|
Tape out
| |
Circiut:
|
Class A/B P.P.
| |
Colour:
|
Chassis chrome, transformer black
| |
Colour front:
|
black, silver
| |
Sensitivity
|
590 mV
| |
Output Impedance:
|
4 Ohm, 8 Ohm
| |
Power Output:
|
2 x 70 Watt @ 1 % THD
| |
Consumption:
|
max. 380 Watt
| |
Highlights
|
switchable reduction of feedback
|
|
Reviews
There are no reviews yet.