| Content | The BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.
This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function).
The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting. Combined with the CMX20T ceiling speakers or MASK4 cabinet loudspeakers, you will have an astonishing voice clarity! |
Infrared radiators providing wireless transmission of up to seven language channels for persons (e.g., observers) listing to a conference without asking for the floor.
The infrared radiators shall connected to the CS 5 BU through 2 BNC connectors and 50 Ohm coaxial cabling and serial concatenation. It shall transmit a PPM system modulated time-multiplex outputs of the central unit shall drive an arbitrary number of radiators. The CS 5 IRT1 shall have a radiation angle of +/- 22° and a working distance of 300 meters (with 50% down). The CS 5 IRT2 shall have a radiation angle of +/- 22° and a working distance of 500 meters (with 50% down).
As accessories of the infrared radiators the holding frame needed for mounting it to the side wall or the ceiling shall be included. The transmitter shall have a built in switchable power supply with IEC connector.
|
- Digital controller for any size systems
- Ease of use
- Complete with all inputs and outputs needed for complex systems
- Integrated infrared signal output
- Free basic control software included
The CS 5 BU ensures easy, user-friendly control of everything from a small discussion setup to a large conference system. The Base Unit provides all the inputs and outputs needed to manage a complex audio system. It controls 64 audio channels that can be individually programmed and assigned to interpretation channels or NOM limitation.
To ensure maximum reliability, all microphone stations and interpreter stations are „daisy-chained" together and connected back to the Base Unit, forming a closedcircuit digital audio bus. Thus, the entire system will continue operating perfectly, with no interruption, even if one of the bus cables breaks.
To power the system, a CS 5 PS 12 power supply is connected to every twelfth microphone station, ensuring consistent signal levels. Unlike competitive techniques, AKGʼs approach to keeping consistent signal levels throughout the system is uncommonly cost efficient. Every CS 5 Conference System comes complete with a FREE basic control software package so the entire system can be controlled from a computer from day one.
The Base unit shall operate up to 5000 units. As analogue inputs the base unit shall handle an external microphone for easy translating to be routed to channel 1, an ordinary external microphone, telephone in and out with mix minus sum, tape in and out and Line in and out. The infrared modulation shall be included in the base unit, providing the relevant infrared signal on two BNC connectors. Also included in the base unit shall be a USB connector to connect to a PC. A basic software package for participants database, voting and other basic functions shall be included. The unit shall be 1 HU 19” wide in a rack mount housing. A serial port shall be available to enable AMX control.
|
- Choice of microphones for every kind of system and room acoustics.
- Display and multifunction soft keys for ease of use.
- Up to 63 language channels independently selectable for two users.
- 1, 3, 5-way voting/polling function.
- Dip-switch selectable president and delegate operating modes.
The CS 5 VU provides two operating modes, reducing the number of different components needed for a conference system.
In a small discussion system with CS 5 DU microphone stations, the chairperson would typically use a CS 5 VU. In President mode, it provides a priority function and allows the user to start votes or polls. The display will then indicate the time left for voting and the results.
In a larger conference system, the CS 5 VU can be used both by delegates and by the president. In delegate mode, it provides all voting and language selection functions independently for two delegates. A bank of dip switches allows the CS 5 VU to be set to President mode with priority and 1, 3, or 5-way voting/polling functions. In computer-controlled conference systems, chip-card identification is available as an option.
Gooseneck, capsule and connecting cable are not included.
The unit shall act as chairman unit or normal delegate unit, selectable by a dipswitch on the bottom of the housing. It shall have a built-in microphone and loudspeaker, which allow the forwarding of the voice of the speaker towards the other units of the system. The chairman shall always be able to start 1,3 and 5 step voting from the unit and monitor the results on the unitʼs display. Priority calls shall also be possible from his unit.
The CS 5 VU is suitable for taking over maximum 63 interpreted languages and the room voice as well, which may be listened to through the headset that is connected to the device. A chip card reader is also included in the unit, with the aid of which it is possible to identify the user of the device in the case of a computer controlled conference.
The backlit graphic LC display facilitates using the device and displays its current status and the result of the vote. The unit shall operate for 2 persons simultaneously, with independent adjustable languages for each of the 2 x 3,5mm stereo jack headphone sockets.
|
Flush mounting frame for permanent installation of the AKG conference microphone units | |
Reviews
There are no reviews yet.