| Content | he OVO3T is one of the most popular models of the Apart OVO-series. This series is loved for its price and sound quality and because of their elegant design these loudspeakers fit into every interior.
However we noticed that all other OVO models carry a 100 Volt version and a low impedance version. Except for OVO3T, this 3 inch loudspeaker is only suited for 100 Volt or 16 Ω systems. So we created OVO3, an 8 Ω impedance version of the OVO3T. This newcomer in the OVO Series can be used in more residential places and into smaller retail-stores, restaurants…
The OVO3 uses a bracket system that allows you to position the loudspeaker in a variety of different angles. In case you want to install the OVO3 on a flat surface, this can easily be done with the supplied pad.
Of course we donʼt want to forget to mention that OVO3 is a small but perfect loudspeaker that likes to be used in combination with a subwoofer like the Apart SUBLIME. A combination OVO3/SUBLIME is a solution that will be almost unnoticeable as the SUBLIME subwoofer is extremely compact which allows you to hide it behind a closet or curtain.
Woofer: 3 inch coated paper
Tweeter: 1 inch silk dome tweeter
Music Power RMS: 40 W / 8 Ohms
Frequency response: 90 Hz to 20 kHz
SPL 1W / 1m: 86 dB
SPL 1m / max. rated power: 102 dB
Dispersion at 1 kHz – 4 kHz – 8 kHz: 180° - 120° - 80°
Color : Black
Cabinet material: ABS
Grille material: Steel
IP classification: 60
Fixing type: Mounting bracket or table stand
Height (mm): 160 mm
Width (mm): 110 mm
Depth (mm): 117 mm (160 mm including bracket)
Distance from wall (mm): 43 mm
Net weight (pair): 1.7 kg
Gross weight (pair): 1.9 kg |
- Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
- Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
- High 30W rated input power and 91 dB output sound pressure level.
- Durable, acoustically efficient polypropylene enclosure.
- Optional wall/under-eaves mounting bracket.
| Specification |
|
| Enclosure Type |
Bass-reflex type |
| Speaker Component |
Low Frequency; 13cm cone speaker (drip-proof)/High Frequency; 3cm dome speaker (film diaphragm) |
| Impedance |
100V Line; 330 Ω (30W), 500 Ω (20W), 1k Ω (10W), 2k Ω (5W)/70V Line; 170 Ω (30W), 330 Ω (15W), 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W) |
| Rated Input Power |
30W |
| Output Sound Pressure Level |
91 dB (1W/1m)** |
| Crossover Frequency |
4kHz (passive network) |
| Frequency Response |
100-20,000Hz (-10dB), 150-13,000Hz (-3dB) |
| Input Connector |
Push terminal |
| Enclosure Material |
Polypropylene resin |
| Color |
Dark gray |
| Dimensions |
(W x H x D): 250 x 157 x 169mm |
| Weight |
approx. 3.9kg |
|
** Pink noise of 330~3,300Hz |
|
PRICE IS PER PIECE AND NOT PER PAIR!
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
- 85 Hz to 22 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 86 dB sensitivity (1W/1m)
- 8 ohms nominal impedance
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
| PRICE PER Pair
EVID 6.2EVID Seri es Twin 6" Surface Mount Speaker System
Comprised of dual 6-inch LF drivers and a 1-inch Ti/waveguide, the EVID 6.2 is
perfect for applications that require exemplary audio and the capability to fill large
areas with sound. Additionally, the flexible Strong-Arm-Mount? (SAM?) system
provides the versatility to accommodate any installation challenge. EV's unique 6-
inch dual woofer design delivers crisp and clean program for the utmost in listening
experience regardless of the location. Great for larger areas that demand higher SPL
levels, the 6.2 delivers the outstanding, full bass output required for shopping malls,
stadiums, airports, etc.
Specifications
Max. SPL / 1m (calc); full space 122 dB
System Power Handling (continuous/program/peak) 150/300/600 Watts
Coverage (nominal -6dB) H° 100 °
Coverage (nominal -6dB) V° 80 °
Nominal Impedance 8 Ohms
Minimum Impedance 6 Ohms
Frequency Response (-10dB) 62 - 20000 Hz
Input Connections Spring Terminal
Sensitivity 1W/1m 94 dB
Transformer Taps (Transformer Version Only) 70V/100V:15W, 30W, 60W
Chassis Size 6 inches
Weight Net 5.3 kg ( 11.68 lbs )
Dimensions (HxWxD) 419 x 228 x 298 mm
(16.5" x 8.98" x 11.73“) |
The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
Reviews
There are no reviews yet.