| Content |
DB25 to 8 x XLR Female. This cable allows the Apogee AP-8AD Yamaha A/D card to accept eight channels
of analog input. Also suitable for use with the AD-16 (quantity 2 required for 16 channels). The wiring is the
same as the analog input connector on a Tascam machine such as the DA-88. Alternatives are available from
Tascam, Hosa and others. |
The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.
Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?
32bit D/A Converter USB Bus power without using unwanted AC adapterWorks with up to 24bit/96kHz audio sourceHigh quality analog headphone amp to drive any type of headphonesEquipped with high-grade AKM 32bit DAC AK4390 - USB Bus power without using unwanted AC adapter
- Works with up to 24bit/96kHz audio source
- Exclusive PLL power supply is built in to reproduce the stable electrical supply
- High quality analog headphone amp to drive any type of headphones
- Equipped with hgih-grade AKM 32bit(*) DAC AK4390
- Condensers and OP amp designed exclusively for audio products
- USB / Digital (Optical) input selector
- Headphones / RCA (Analog) output selector
- Doubles as D/D converter from USB digital audio to Optical
- An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter
Note: When using the USB input, the sampling frequency is fixed at 96kHz. Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.
Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)
Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)
General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g
|
Laptop USB Input Digital to Analog Audio Converter with Bass and Volume Adjustment,DAC Digital Audio SPDIF Optical to Analog RCA and 3.5 mm Jack, Optical to RCA for PS4 Xbox HDTV DVD
1. This DAC supports digital PCM audio format,PLS kindly set your digital audio device such as HDTV, TV BOX, or game console into PCM or LPCM audio before using, NOT support DTS Dolby AC3. PCM Setting Path: Device homepage -- system setting -- image and sound -- voice setting -- digital audio output -- PCM
2. If you are connecting to Samsung or LG TV,please follow the steps below to set it up:Samsung TV settings path:(1)PCM format: Settings--Sound--Expert Settings--Audio Format--PCM;(2)External speakers:Settings--Sound--Select Speaker--Optical B.LG;TV setting path:(1)PCM setting path:Menu--All Settings--Sound Out--Optical--Digital Sound Out--PCM;(2)If you need to synchronize the output of the TV speakers and fiber:Menu--All Settings--Sound Out--Optical--Internal TV Speaker+Optical
3. Power charging: USB Power Cable--seperate 5V 1A Standard Plug--wall socket. Do Not Power Converter by plugging in USB cable into your TV directly (unstable power supply which cause buzzing noise). If the volume (from DAC output) is not loud enough, please connect the output of DAC with low-impedance cellphone headset, headphone amplifier, or power amplifier.
4. Not compatible with Netflix and YouTube video websites. Before power on, you must turn the adjustment knob counterclockwise to minimize the volume to avoid damage to your hearing! Not support USB flash disk!
5. This product is specially designed for professional audio signal processing,can convert the digital audio signal of input of coaxial or optical interface to analog stereo audio signal of RCA interface and 3.5mm headphone jack.The built-in professional audio amplifier chip and volume adjustment knob can directly drive the headphones and adjust volume.The product's bass adjustment function can provide powerful stereo,heavy bass effects,and create a environment different from the sound field.Features:
Connect to DVD, HD player and other devices
Eliminate the noise when there is no input signal, and automatically mute when the non-audio signal is input.
Support 192kHz 24bit sampling rate.
Metal shell, anti-interference
Support Audio Format: PCM
Separating Degree(1KHZ): 94DB
Response Frequency: 20Hz~20KHz -0.2db
Signal-to-Noise Ratio(SNR): -100DB
Total Harmonic Distortion(THD+N): 10Hz~20KHz 0.25-0.065%
Blocking Time: 0.577Fs
Sampling Rate: 32~192 KHz
Bit Rate: 16~24 Bit
Earphone output level(Adjust the bass to maximum):3V
RCA output level(Adjust the bass to maximum): 9V
Earphone Output Power(Adjust the bass tomaximum): (32 ohm)30mW
Earphone Output Impedance: 0.8 ohm
RCA Output Impedance: 450 ohm
Working Voltage: +5V
Maximum Voltage: +6V
Maximum Power Consumption: 75mA
Operating Temperature Range: -10-70℃
Storage Temperature Range: -60-150℃
Operating Humidity Range: 10% - 80%RH(No Condensation)
Storage Humidity Range:5- 90%RH(No Condensation)
colour: black
Material: metal
Size: 10x9.5x1.6CMPackage Contents:
1 x Host
1 x USB power cord
1 x USBA male cable
1 x Optical cable
1 x English manualOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
The DA-16X features a redesigned power supply, standard 192kHz sampling rates,
the C777 clocking technology found in Big Ben, and optional Pro Tools HD and
FireWire expansion cards. And, not only does the X-Series hardware offer unequaled,
groundbreaking technology but it makes it available at a fraction of the cost associated
with previous, premium Apogee gear.
Features:
16 channels of premium 24-bit DA conversion
Sample rates up to 192k
16 channels of AES, ADAT/SMUX Input
Word Clock I/O
Optional HD card for direct connection to ProTools HD
Optional S800 FireWire card capable of sample rates up to 192k, compatible
with OS X/Windows XP and all popular DAW's
All option cards (X-FireWire and X-HD) facilitate connection of multiple units
Direct Digital Synthesis (DDS) using Big Ben's C777 Clock Technology up to 192kHz
Master clock capability
Adaptive Loop Filtering (ALF) for optimum clock performance and minimum jitter
Support for AES double wire and SMUX formats
Intuitive front panel calibration
Word Clock termination switch
|
The Apogee X-Digi-Mix expansion card allows for direct connectivity between
Pro Tools Mix systems and the Rosetta 200 or Rosetta 800. The X-Digi-Mix
card provides superior quality conversion to Pro-Tools Mix users without the
need for an additional interface, and effectively extending the life of their Mix
systems for years to come.
Features:
* Standard Digidesign peripheral connector for interfacing directly to Mix Core
or Farm cards.
* Superclock (FSx256) output for convenient integration into existing Pro Tools
configurations.
* With necessary Pro Tools hardware expansion, multiple Rosetta-800s may be
connected into a system.
* Rosetta 800 may be used alongside an Apogee AD-8000 or Trak 2 outfitted with
an AMBUS-Digi8+ card as well as any other Pro Tools Mix-compatible hardware.
* Multiple slaved Rosetta 800s may lock to Word Clock or directly to the Digi-mix
card for low jitter synchronization of the Pro-Tools system.
|
Input MADI: 1 x BNC, 1 x optical
Output MADI: 1 x BNC, 1 x optical
Input ADAT optical: 8 x TOSLINK, 24-Bit, Bitclock PLL
Output ADAT optical: 8 x TOSLINK, 24-Bit
Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp input signal), switchable termination
Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
MIDI input and output: via two 5-pin DIN jacks
Sync sources: MADI, ADAT optical, word clock, internal
Varipitch: by input signal or word clock
Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock)
Sample rate range: MADI: 32 kHz - 96 kHz, word clock: 27 kHz-105 kHz, ADAT: 33 kHz - 57 kHz
Jitter: Internal clock
Jitter suppression on external clock: circa 30 dB (2.4 kHz)
Jitter sensitivity: all PLLs operate even at 100 ns Jitter without problems
Power supply: internal switching mode ps, 100 V-240 V AC, 50-60 Hz, 10 Watts
Dimensions: 483 x 44 x 200 mm
|
Reviews
There are no reviews yet.