APOGEE AES-8-IFC 8 CHANNEL AtoD INTERFACE CABLE

163.68 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: AES-8-IFC Category:
DB25 to 8 x XLR Female. This cable allows the Apogee AP-8AD Yamaha A/D card to accept eight channels of analog input. Also suitable for use with the AD-16 (quantity 2 required for 16 channels). The wiring is the same as the analog input connector on a Tascam machine such as the DA-88. Alternatives are […]

 

Read more

DB25 to 8 x XLR Female. This cable allows the Apogee AP-8AD Yamaha A/D card to accept eight channels
of analog input. Also suitable for use with the AD-16 (quantity 2 required for 16 channels). The wiring is the
same as the analog input connector on a Tascam machine such as the DA-88. Alternatives are available from
Tascam, Hosa and others.

Weight 1.81 kg

Reviews

There are no reviews yet.

Be the first to review “APOGEE AES-8-IFC 8 CHANNEL AtoD INTERFACE CABLE”

Your email address will not be published. Required fields are marked *

Quick Comparison

APOGEE AES-8-IFC 8 CHANNEL AtoD INTERFACE CABLE removeAPOGEE X-DIGI-MIX EXPANSION CARD removeAPOGEE SYMPHONY I/O 2X6 A/D & D/A CONVERTER 2 IN & 6 OUT removeRADIAL DAN-RX Stereo D/A Converter removeRME ADI-648 Converter MADI to ADAT removeTASCAM LA-40MKIII 4ch Balanced/Unbalanced Line CONVERTER remove
NameAPOGEE AES-8-IFC 8 CHANNEL AtoD INTERFACE CABLE removeAPOGEE X-DIGI-MIX EXPANSION CARD removeAPOGEE SYMPHONY I/O 2X6 A/D & D/A CONVERTER 2 IN & 6 OUT removeRADIAL DAN-RX Stereo D/A Converter removeRME ADI-648 Converter MADI to ADAT removeTASCAM LA-40MKIII 4ch Balanced/Unbalanced Line CONVERTER remove
Image
SKUAES-8-IFCX-DIGI-MIXSYMPHONY I/O 2X6H30RL00039J30RM00009 TA/EM/000001
Rating
Price 163.68 incl. GR VAT 519.40 incl. GR VAT 2,258.98 incl. GR VAT 479.00 incl. GR VAT 2,549.00 incl. GR VAT 399.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

Available on backorder

In stock

AvailabilityIn stockIn stockIn stockIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

DB25 to 8 x XLR Female. This cable allows the Apogee AP-8AD Yamaha A/D card to accept eight channels
of analog input. Also suitable for use with the AD-16 (quantity 2 required for 16 channels). The wiring is the
same as the analog input connector on a Tascam machine such as the DA-88. Alternatives are available from
Tascam, Hosa and others.

The Apogee X-Digi-Mix expansion card allows for direct connectivity between
Pro Tools Mix systems and the Rosetta 200 or Rosetta 800. The X-Digi-Mix
card provides superior quality conversion to Pro-Tools Mix users without the
need for an additional interface, and effectively extending the life of their Mix
systems for years to come.

Features:
* Standard Digidesign peripheral connector for interfacing directly to Mix Core
  or Farm cards.
* Superclock (FSx256) output for convenient integration into existing Pro Tools
  configurations.
* With necessary Pro Tools hardware expansion, multiple Rosetta-800s may be
  connected into a system.
* Rosetta 800 may be used alongside an Apogee AD-8000 or Trak 2 outfitted with
  an AMBUS-Digi8+ card as well as any other Pro Tools Mix-compatible hardware.
* Multiple slaved Rosetta 800s may lock to Word Clock or directly to the Digi-mix 
  card for low jitter synchronization of the Pro-Tools system.

Inputs Analog Inputs 2 balanced inputs on 2 female XLR connectors Connect microphones via external mic preamps Connect guitars via DI boxes or external mic preamps Connect keyboards directly to Symphony I/O Digital Inputs AES IN: Stereo input on 1 female XLR connector Optical IN: Supports ADAT, SMUX & S/PDIF ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector S/PDIF Coax IN: 2 channels, up to 192 kHz on 1 RCA connector Outputs Analog Outputs 6 balanced outputs on 1 DSUB 25-pin connector Digital Outputs AES OUT: Stereo output on 1 male XLR connector Optical OUT: Supports ADAT, SMUX & S/PDIF ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector S/PDIF Coax OUT: 2 channels, up to 192 kHz on 1 RCA connector

  • Stereo D/A Converter
  • Supports up to 24-Bit/96 kHz Resolution
  • Dante-Enabled Ethernet Input
  • Balanced Analog XLR Outputs
  • Adjustable Output Level
  • 3.5mm Stereo Headphone Output
  • 14-Gauge Steel Enclosure
  • Sync and Power Indicators

Input MADI: 1 x BNC, 1 x optical
Output MADI: 1 x BNC, 1 x optical
Input ADAT optical: 8 x TOSLINK, 24-Bit, Bitclock PLL
Output ADAT optical: 8 x TOSLINK, 24-Bit
Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp input signal), switchable termination
Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
MIDI input and output: via two 5-pin DIN jacks
Sync sources: MADI, ADAT optical, word clock, internal
Varipitch: by input signal or word clock
Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock)
Sample rate range: MADI: 32 kHz - 96 kHz, word clock: 27 kHz-105 kHz, ADAT: 33 kHz - 57 kHz
Jitter: Internal clock Jitter suppression on external clock: circa 30 dB (2.4 kHz)
Jitter sensitivity: all PLLs operate even at 100 ns Jitter without problems
Power supply: internal switching mode ps, 100 V-240 V AC, 50-60 Hz, 10 Watts
Dimensions: 483 x 44 x 200 mm

The Tascam LA-40 MKIII has been primarily designed to provide matching capabilities between professional equipment and semi-professional or consumer equipment. It consists of four RCA inputs and outputs (–10 dBV, unbalanced) as well as four XLR inputs and outputs (+4 dBu/–20 dBu, balanced) which enable the user to connect for instance four tracks of a multitrack recorder (ins and outs) to a balanced mixer ensuring optimum level and impedance matching. Also, a switch matrix allows channels to be linked, utilizing the converter as a distribution amplifier for splitting signals to multiple recorders, or for multizone sound routing applications.

Switches on the bottom panel allow to select a nominal level of +4 dBu or –20 dBu for each channel and ±12 dB trim pots on the front panel make perfect level matching easy. LEDs on the front panel indicate signal presence for each channel. The LA-40 MKIII has also ground lift switches for each channel and a combined master switch to avoid ground loops.
Main Features

    * 4 channels with unbalanced RCA inputs and balanced XLR outputs
    * 4 channels with balanced XLR inputs and unbalanced RCA outputs
    * XLR nominal level selectable between +4 dBu and –20 dBu
    * Trim pots for each channel on front panel (±12 dB)
    * Signal LED for each channel

    * Ground lift switches for each channel and master switch
    * Distribution amplifier functionality: One mono input signal can be routed to all four output channels, or one stereo input signal can be routed to two channels each (RCA to XLR and XLR to RCA)
    * Internal power supply, no AC adapter needed
    * 1 U rack-mountable chassis

Specifications
Inputs and outputs (unbalanced to balanced)
Inputs         4 RCA jacks (unbalanced)
  Input impedance         23 kOhm (when all INPUT LINK switches are OFF)
5.7 kOhm (when all INPUT LINK switches are ON)
  Nominal input level         –10 dBV, ±1 dB
  Maximum input level         +4.8 dBV
  Indicator detection level         –36 dBV or more (OUTPUT LEVEL switch set to +4 dB or –20 dB)
Outputs         4 XLR-type connectors (balanced, Pin 1 = ground, Pin 2 = hot, Pin 3 = cold)
  Output impedance         94 Ohm
  Nominal load impedance         10 kOhm
  Minimum load impedance         600 Ohm
  Nominal output level         +4 dBu, ±1 dB (OUTPUT LEVEL switch set to +4 dB)
–20 dBu, ±1 dB (OUTPUT LEVEL switch set to –20 dB)
  Maximum output level         +23 dBu
Inputs and Outputs (balanced to unbalanced)
Inputs         4 XLR-type connectors (balanced, Pin 1 = ground, Pin 2 = hot, Pin 3 = cold)
  Input impedance         54 kOhm (when all INPUT LINK switches are OFF)
13.5 kOhm (when all INPUT LINK switches are ON)
  Nominal input level         +4 dBu, ±1 dB (INPUT LEVEL switch set to +4 dB)
–20 dBu, ±1 dB (INPUT LEVEL switch set to –20 dB)
  Maximum input level         +30 dBu (INPUT LEVEL switch set to +4 dB)
+8 dBu (INPUT LEVEL switch set to –20 dB)
  Indicator detection level         –22 dBV or more (INPUT LEVEL switch set to +4 dB)
–46 dBV or more (INPUT LEVEL switch set to –20 dB)
Outputs         4 RCA jacks (unbalanced)
  Output impedance         200 Ohm
  Nominal load impedance         10 kOhm
  Minimum load impedance         1 kOhm
  Nominal output level         –10 dBV, ±1 dB
  Maximum output level         +18 dBV
Audio performance
TRIM range         ±12 dB
S/N ratio (at nominal levels)         90 dB(A) (20 kHz LPF)
87 dB(A) (20 Hz HPF and 20 kHz LPF)
Total harmonic distortion
(1 kHz, at nominal levels)         0.005 % or less
Frequency response (at nominal levels)         20 Hz – 100 kHz, ±3 dB
Crosstalk
(1 kHz, nominal levels, 600 Ohm load)         –90 dB
Other specifications
Power requirements         100–240 V AC, 50/60 Hz
Power consumption         6 W
Dimensions (W x H x D)         483 mm x 44 mm x 280 mm
Weight         3 kg

Weight1.81 kg2.30 kg5.00 kg0.00 kg1.00 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.81 kg
Weight 2.30 kg
Weight 5.00 kg
Weight 0.00 kg
Weight 1.00 kg
Weight 3.00 kg