Content |
AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
Optional X-Video expansion card to provide master video sync generator
Realtime format conversion between all digital formats
Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
Three stage Termination Sensing for each word clock output
INPUTS
2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
S/PDIF optical on TOS-LINK 44.1-48k
S/PDIF coaxial on RCA 44.1-192k
ADAT 44.1-48k
ADAT/SMUX II for 88.2-96k
ADAT/SMUX IV for 176.4-192k
Word Clock BNC 44.1 –192k
Video
Optional video sync (X-Video card)
OUTPUTS
2 x AES-EBU on XLR single or double wide 44.1-192k
S/PDIF coaxial 44.1-192k
S/PDIF optical on TOS-LINK 44.1-48k
6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
ADAT
SMUX II
SMUX IV
Optional video sync (X-Video card)
SPECS
Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
Video: PAL/NTSC/60Hz
"SuperClock" (256fs)
Pull up/down 0.1% and 4% from any sample rate
Apogee´s new Ultra Low Jitter C777 clock
Three stage termination indicator (under/correct/over) on each
Word Clock output:
"SureLock" technology for drop out prevention
4 digit numeric true sample rate indication
Universal power: 15 W 90-250 VAC 50-60 HZ
Connection:
Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
Operating System:
Mac and Windows
|
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function |
Four channel expander/gate |
Number of Channels |
4 |
Inputs |
4 x XLR, 4 x TRS 1/4" phone |
Output |
4 x XLR, 4 x TRS 1/4" phone |
Maximum Input Level |
+21dBu |
Compression Threshold |
Not applicable |
Compression Ratio |
Not applicable |
Attack Time |
Not applicable |
Release Time |
Not applicable |
Gate Threshold |
0 to -80dB |
Gate Rate |
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable |
Maximum Output Level |
+21dBu |
Make-up Gain |
Not specified by manufacturer |
Frequency Response |
18HZ to 30kHz |
Dynamic Range |
Not specified by manufacturer |
Noise |
>95dBu, unweighted, 22Hz to 22kHz |
Dimensions |
1U rack mount, 8 1/2" deep |
Specialties |
Unit will operate at either +4dB or -10 dB |
|
Κάρτα τεσσάρων εξόδων line για τα BLU-80, BLU-32, BLU-16.
|
The Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.
The BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.
The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.
Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.
This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
The BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.
Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.
Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Key Features:
• 12 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• Configurable Signal Processing
• 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect |
Product Features:
16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality
8 analog, servo-balanced XLR outputs
AES50 network ports featuring KLARK TEKNIKʼs SuperMAC networking capability for ultra-low jitter and latency
Up to 100 m networking capability via CAT-5e cable (not included)
Dual AES50 ports for cascading S16 units—no merger or router required
Precise LED metering plus 7-segment displays for signal control on stage
Phones output assignable to any of the inputs/outputs for on-stage monitoring
Connectivity for BEHRINGER's P-16 Personal Monitoring System for In-Ear applications (not included)
Dual ADAT outputs for use in splitter mode and stand-alone digital multicore applications
MIDI In/Out for bi-directional communication between FOH console and on-stage MIDI devices
USB connector for system updates via PC
"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
"Built like a tank" yet compact, all-steel 2U rack-mount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
KLARK TEKNIK AES50
KLARK TEKNIK SuperMAC (AES50-Compliant) technology gives the S16 its high-capacity digital interconnectivity with ultra-low latency operation, as well as superbly simple deployment and ease of use. KLARK TEKNIK engineers worked hand-in-hand with BEHRINGER product developers to ensure the S16 meets, or exceeds, the requirements of live performance entertainers and their professional audio engineers. Some of the outstanding features are:
48 bidirectional audio channels over CAT5 cable (48 kHz)
24 bidirectional audio channels over CAT5 cable (96 kHz)
Single cable duplex interconnection for audio and sample clocks
Ethernet physical layer audio data transmission
High channel count and ultra-low deterministic latency
Accurate phase-aligned clock distribution.
Comprehensive error detection
and management
Provision for redundant networking
Minimal configuration ñ total ease of deployment and use
Ethernet TCP/IP protocol-compatible auxiliary data channel
Royalty-free implementations available as Xilinx FPGA cores
OEM modules available from developer partners
User's Manual
|
The Symphony I/O Chassis from Apogee provides two I/O Module slots for a variety of digital audio conversion options that form the interface side of the Symphony I/O. Elegant and easy to use, the front panel of Symphony I/O Chassis presents the visual feedback needed to monitor levels, sample rate and clock status, along with the controls required to adjust gain, output levels ,and select the Audio Interface Mode (AIM).
The rear panel provides access to the two I/O Module slots that are capable of a combined thirty-two channels of input and output. PCI, USB and Ethernet connectivity ensures complete compatibility with popular workstations, while the panel also includes Wordclock I/O connectors and termination, LoopSynch I/O connectors, and a quiet digitally-controlled fan to keep everything running cool.
The Audio Interface Mode (AIM) allows the system to be optimized for the most popular audio workstation environments, including Symphony PCI, Pro Tools HD PCI, USB audio, or to function as a standalone converter. With a two-step adjustment using a single front panel encoder knob, the interface can be easily switched back and forth between the preferred modes.
The optional five I/O Modules allow the user to choose from standard configurations, or customize the following - channel count, analog to digital input, digital to analog output, microphone preamps (requires an analog card) and digital I/O.
Two input/output module slots Ethernet connector USB 2.0 connector Two Symphony PC-32 ports for direct connection to Symphony 64 PCI card and Pro Tools core card Wordclock I/O and LoopSync I/O Wordclock termination switch Sixteen, 10-segment meters Two multi-function encoder knobs OLED GUI provides function selection and function adjustment and Audio Interface Mode (AIM) selection Two 1/4" headphone outputs 7-segment sample rate display Clock source display Meter source display High-performance, temperature controlled fan Connectors 2 x 1/4" TRS phone Headphone
2 x Symphony I/O PC-32 Ports
1 x Ethernet
1 x USB
2 x BNC Wordclock I/O
2 x BNC LoopSync I/O
Headphones THD+N: -105dB @ 19dBu
Dynamic Range: 119dB, A-weighted
Output Impedance: 30Ω
Power Requirements 90~240VAC, 50/60Hz, 150W
System Requirements Mac OS X 10.5.8 and above
Dimensions (WxDxH) 19 x 11.5 x 3.5" (483 x 292 x 89mm)
|
Reviews
There are no reviews yet.