Content |
Power and Options...
The Apogee X-Series FireWire Card gives you the power and convenience of a
direct connection to any FireWire equipped computer. The X-FireWire Card uses
an expansion slot in the ROSETTA 800 to give users of Logic, Nuendo and other
popular software the option of amazing sounding Apogee conversion. Using Apple?s
Core Audio FireWire driver for Macintosh and ASIO drivers for Windows, your
hardware options for your DAW are greatly expanded.
eXpandability...
The two ports on the Apogee X-FireWire Card allow you to daisy-chain additional
devices to create an entire system. By extending the bus, the X-FireWire card
allows for daisy-chaining of multiple Apogee systems or compatible peripherals,
and permits the use of multiple FireWire devices by computers with only one port.
The card also passes power through the FireWire ports to allow the powering of
additional devices. (Note: This feature is available for Windows systems only at this time).
Get Connected
With and X-FireWire card installed in an AD-16X, DA-16X, Rosetta 200 or Rosetta 800
you have the power of a professional FireWire connection to your favorite DAW: Logic 7,
Nuendo, Cubase, Cakewalk, Live or virtually any native audio production software.
Low Latency with FireMix
FireMix is a mixer application that allows control and creation of customizable sub-mixes
for low latency performance in the native environment. FireMix features accurate input and
output metering, 16bit fader control, and eight 48bit mix busses with enough DSP headroom
to insure that there are no compromises to the audio quality. FireMix also has customizable
pan control and key modifier user preferences to allow FireMix to operate in the same manner
as your favorite audio application. With FireMix, you will get low latency monitoring, have the
ability to save and recall all of your mixes, group and ungroup master faders all with little to no
impact on your CPU performance.
Features:
* 2, S400 FireWire connectors, allowing convenient chaining of multiple units
* Compatible with Apple's OS X built-in FireWire Core Audio driver
* Supplied with Windows XP WDM/ASIO driver
* Up to 8x8 24bit at 88.2/96k
* Up to 4x4 24-bit channels at 176.4/192KHz
* Fully compliant and compatible with 61883-6 and other relevant 1394 IEEE
and AES specifications
* Allows low-jitter synchronization to a FireWire audio network and can provide
a master clock source for a FireWire audio network
|
Laptop USB Input Digital to Analog Audio Converter with Bass and Volume Adjustment,DAC Digital Audio SPDIF Optical to Analog RCA and 3.5 mm Jack, Optical to RCA for PS4 Xbox HDTV DVD
1. This DAC supports digital PCM audio format,PLS kindly set your digital audio device such as HDTV, TV BOX, or game console into PCM or LPCM audio before using, NOT support DTS Dolby AC3. PCM Setting Path: Device homepage -- system setting -- image and sound -- voice setting -- digital audio output -- PCM
2. If you are connecting to Samsung or LG TV,please follow the steps below to set it up:Samsung TV settings path:(1)PCM format: Settings--Sound--Expert Settings--Audio Format--PCM;(2)External speakers:Settings--Sound--Select Speaker--Optical B.LG;TV setting path:(1)PCM setting path:Menu--All Settings--Sound Out--Optical--Digital Sound Out--PCM;(2)If you need to synchronize the output of the TV speakers and fiber:Menu--All Settings--Sound Out--Optical--Internal TV Speaker+Optical
3. Power charging: USB Power Cable--seperate 5V 1A Standard Plug--wall socket. Do Not Power Converter by plugging in USB cable into your TV directly (unstable power supply which cause buzzing noise). If the volume (from DAC output) is not loud enough, please connect the output of DAC with low-impedance cellphone headset, headphone amplifier, or power amplifier.
4. Not compatible with Netflix and YouTube video websites. Before power on, you must turn the adjustment knob counterclockwise to minimize the volume to avoid damage to your hearing! Not support USB flash disk!
5. This product is specially designed for professional audio signal processing,can convert the digital audio signal of input of coaxial or optical interface to analog stereo audio signal of RCA interface and 3.5mm headphone jack.The built-in professional audio amplifier chip and volume adjustment knob can directly drive the headphones and adjust volume.The product's bass adjustment function can provide powerful stereo,heavy bass effects,and create a environment different from the sound field.Features:
Connect to DVD, HD player and other devices
Eliminate the noise when there is no input signal, and automatically mute when the non-audio signal is input.
Support 192kHz 24bit sampling rate.
Metal shell, anti-interference
Support Audio Format: PCM
Separating Degree(1KHZ): 94DB
Response Frequency: 20Hz~20KHz -0.2db
Signal-to-Noise Ratio(SNR): -100DB
Total Harmonic Distortion(THD+N): 10Hz~20KHz 0.25-0.065%
Blocking Time: 0.577Fs
Sampling Rate: 32~192 KHz
Bit Rate: 16~24 Bit
Earphone output level(Adjust the bass to maximum):3V
RCA output level(Adjust the bass to maximum): 9V
Earphone Output Power(Adjust the bass tomaximum): (32 ohm)30mW
Earphone Output Impedance: 0.8 ohm
RCA Output Impedance: 450 ohm
Working Voltage: +5V
Maximum Voltage: +6V
Maximum Power Consumption: 75mA
Operating Temperature Range: -10-70℃
Storage Temperature Range: -60-150℃
Operating Humidity Range: 10% - 80%RH(No Condensation)
Storage Humidity Range:5- 90%RH(No Condensation)
colour: black
Material: metal
Size: 10x9.5x1.6CMPackage Contents:
1 x Host
1 x USB power cord
1 x USBA male cable
1 x Optical cable
1 x English manualOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
Optional 8-channel D/A card with specifications matching those of the A/D section, turning the Trak2 into a complete digital audio conversion system with two A/D channels and up to 8 D/A. |
The DA-16X features a redesigned power supply, standard 192kHz sampling rates,
the C777 clocking technology found in Big Ben, and optional Pro Tools HD and
FireWire expansion cards. And, not only does the X-Series hardware offer unequaled,
groundbreaking technology but it makes it available at a fraction of the cost associated
with previous, premium Apogee gear.
Features:
16 channels of premium 24-bit DA conversion
Sample rates up to 192k
16 channels of AES, ADAT/SMUX Input
Word Clock I/O
Optional HD card for direct connection to ProTools HD
Optional S800 FireWire card capable of sample rates up to 192k, compatible
with OS X/Windows XP and all popular DAW's
All option cards (X-FireWire and X-HD) facilitate connection of multiple units
Direct Digital Synthesis (DDS) using Big Ben's C777 Clock Technology up to 192kHz
Master clock capability
Adaptive Loop Filtering (ALF) for optimum clock performance and minimum jitter
Support for AES double wire and SMUX formats
Intuitive front panel calibration
Word Clock termination switch
|
Inputs Analog Inputs 2 balanced inputs on 2 female XLR connectors Connect microphones via external mic preamps Connect guitars via DI boxes or external mic preamps Connect keyboards directly to Symphony I/O Digital Inputs AES IN: Stereo input on 1 female XLR connector Optical IN: Supports ADAT, SMUX & S/PDIF ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector S/PDIF Coax IN: 2 channels, up to 192 kHz on 1 RCA connector Outputs Analog Outputs 6 balanced outputs on 1 DSUB 25-pin connector Digital Outputs AES OUT: Stereo output on 1 male XLR connector Optical OUT: Supports ADAT, SMUX & S/PDIF ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector S/PDIF Coax OUT: 2 channels, up to 192 kHz on 1 RCA connector |
Input MADI: 1 x BNC, 1 x optical
Output MADI: 1 x BNC, 1 x optical
Input ADAT optical: 8 x TOSLINK, 24-Bit, Bitclock PLL
Output ADAT optical: 8 x TOSLINK, 24-Bit
Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp input signal), switchable termination
Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
MIDI input and output: via two 5-pin DIN jacks
Sync sources: MADI, ADAT optical, word clock, internal
Varipitch: by input signal or word clock
Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock)
Sample rate range: MADI: 32 kHz - 96 kHz, word clock: 27 kHz-105 kHz, ADAT: 33 kHz - 57 kHz
Jitter: Internal clock
Jitter suppression on external clock: circa 30 dB (2.4 kHz)
Jitter sensitivity: all PLLs operate even at 100 ns Jitter without problems
Power supply: internal switching mode ps, 100 V-240 V AC, 50-60 Hz, 10 Watts
Dimensions: 483 x 44 x 200 mm
|
Reviews
There are no reviews yet.