| Content |
Professional quality microphone for GarageBand on iPad, iPhone and Mac. Features: - Up to 96kHz recording. - Studio quality cardioid condenser microphone. - PureDIGITAL connection for pristine sound quality. - No configuration, just plug in and record. - Designed for vocal and acoustic instrument recording. - Input only, output via iPhone, iPad or Mac. | The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices.
The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns.
The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds.
On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.
The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter.
The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty.
Features
High sensitivity and extremely low self noise
Five switchable polar patterns for placement and application flexibility
Two-color LEDs provide quick visual indication of selected polar pattern and output overload
Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen
High sound pressure level capability and wide dynamic range
Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions
Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors
Specifications
Type: 1" large diaphragm pressure gradient microphone
Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Frequency Range: 20 to 20,000 Hz
Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
Preattenuation Pad: -6, -12,-18 dB, switchable
Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Power Requirements: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Dimensions: 2" x 1.5" x 6.3“
Net Weight: 10.6 oz
Shipping Weight: 5 lbs (2.27 kg) |
AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones. Lyra has four selectable capture modes—Front, Front + Back, Tight Stereo and Wide Stereo—making it capable of capturing audio in a variety of applications and up to 24-bit/192kHz high-resolution audio. AKG K371 professional studio headphones combine performance, accuracy and supreme comfort in a compact, folding design that’s ideal for production in the studio or on location. K371s are precision-engineered to match AKG’s
Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail.
The package includes: 1 x USB-C to USB-A cable, 1 x 1.2 m (2.5) straight headphone cable, 1 x 3.0 m (9.8) straight headphone cable, 1 x 3.0 m (9.8) coiled headphone cable, 1 x 3.5 mm (1/8/") to 6.5 mm (1/4/") headphone adapter, 1 x Dual-headphone adapter (supports two headphone connections), 1 x Protective headphone carrying pouch
Specifications (Microphone)
- Type: Condenser
- Polar Pattern: Front, Front & Back, Tight Stereo and Wide Stereo
- Frequency Response: 20 to 20,000 Hz
- Microphone Bit Depth/Sample Rate: 24-bit/192 kHz
- Max SPL: 129 dB SPL (0.5% THD)
- Microphone Power Requirement / Consumption: 5V USB / 75 mA
- Output Connection: USB 2.0
- Headphone Output Impedance: 16Ω
- Headphone Power Output (RMS): 43 mW
- Headphone Frequency Response: 20 Hz – 22 kHz
- Microphone Headphone Output S/N Ratio: 98.0dB
Specification (Headphones)
- Headphone Type: Closed Back
- Driver Size: 50mm
- Voice Coil: Pure OFC voice coil
- Frequency Response: 5 Hz – 40 kHz
- Sensitivity (SPL): 114 dB SPL/V @ 1 kHz
- Impedance: 32 ohms
- Weight: 255g
| Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power.
Specifications
Polar Pattern: cardioid
Frequency Response: 20?20.000 Hz
Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa
Max. SPL for 1% / 3% THD: 126/130 dB SPL
Equivalent Noise Level: 33 dB to DIN 45 412
Electrical Impedance: 200 ohms
Recommended Load Impedance: >2.000 ohms
Power Requirement: 9 to 52 volts universal phantom power
Current Consumption: approx. 2 mA
Connector : 3-pin XLR
Cable Length: 1.5 m (5 ft.)
Finish: matte black
Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.)
Net / Shipping Weight: 23/192 g (0.8/6,8 oz.)
Optional Accessorires: B15, B18 | Equipped with a USB output, the AT2020USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The microphone offers the critically acclaimed, award-winning sound of the AT2020, with studio-quality articulation and intelligibility perfect for singer/songwriters, podcasters, voice-over artists, field recorders, and home studio recorders.
The AT2020USB+ features a built-in headphone jack with volume control that allows you to directly monitor your microphone signal with no delay. It also offers mix control that blends microphone and pre-recorded audio. The microphoneʼs cardioid pickup pattern delivers excellent off-axis rejection, while its A/D converter with a 16-bit, 44.1/48 kHz sampling rate ensures extremely articulate sound reproduction.
Audio-Technicaʼs state-of-the-art design and manufacturing techniques ensure that the microphone complies with the companyʼs renowned consistency and reliability standards.
-
- Condenser microphone with USB output for digital recording
-
- High quality A/D converter with 16 bit, 44.1/48 kHz sampling rate for superb audio
-
- Headphone jack with volume control allows you to monitor the microphone signal with no delay
-
- Mix control allows you to blend your microphone signal and pre-recorded audio
-
- High-output internal headphone amplifier delivers superior clarity and musical detail as well as more volume overall
-
- Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording and voiceover use
-
- Compatible with Windows 7, Vista, XP, 2000 and Mac OS X
- Tripod desk stand with folding legs for secure and easily portable tabletop use
| ELEMENT |
Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN |
Cardioid |
| FREQUENCY RESPONSE |
20 – 20,000 Hz |
| POWER REQUIREMENTS |
USB Power (5V DC) |
| BIT DEPTH |
16 bit |
| SAMPLE RATE |
44.1/48 kHz |
| VOLUME CONTROL |
Mix control;
Headphone volume control |
| WEIGHT |
386 g (13.6 oz) |
| DIMENSIONS |
162.0 mm (6.38“) long,
52.0 mm (2.05“) maximum body diameter |
| OUTPUT CONNECTOR |
USB-type |
| HEADPHONE OUTPUT POWER |
130 mW (at 1 kHz, 10% T.H.D., 32 ohm load) |
| HEADPHONE JACK |
3.5 mm (1/8“) TRS (stereo) |
| ACCESSORIES FURNISHED |
Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable |
|
- Element: Back electret condenser
- Element diameter: 14mm
- Frequency response: 20–17,000Hz
- Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
- Output: USB
- A-D converter: 48kHz / 16-bit sampling rate
- Output impedance: 100Ω ± 30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max. SPL: 132dB (at 1kHz <1% THD)
- Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
|
Reviews
There are no reviews yet.