| Content |
Apogee Symphony 64 Features:
64 channels of 24-bit/192kHz digital I/O per card
Up to 128 channels of I/O per Mac Pro
Near zero latency performance
Connects directly to Apogee's X-Series and Rosetta Series converters via the X-Symphony option card
Apogee's VBus - virtual routing within a Core Audio application or between multiple applications.
Apogee's SBus - 32 channel, 192kHz digital audio network between two Mac computers
Apogee's Maestro Software for advanced control and routing
Compatibility with any Core Audio application |
The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.
The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.
Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.
The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One FireWire port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One FireWire port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers
Mbox Pro Hardware
Pro Tools Mbox Pro
Mbox® Pro is the ultimate high-definition recording interface, packing a wide range of analog and digital I/O connections into a desktop audio workstation.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* FireWire connection
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 192 kHz sample rates*
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Connect up to three pairs of monitors or do 5.1 surround mixing**
* Hardware configuration:
o 8 x 8 simultaneous channels of I/O
o 4 mic inputs with 48 V phantom power and high pass filter (2 XLR/DI combo, 2 XLR)
o 4 1/4" TRS line inputs
o 2 unbalanced Alt line inputs (2 RCA, 1 mini 1/8”)
o 6 1/4" TRS balanced line outputs
o 2 discrete 1/4” stereo headphone outputs with separate volume controls
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Word clock I/O
o Monitor control section with Mono, Mute, Dim, Alt Source, and Speaker A/B/C switching controls
o Dedicated monitor volume knob
* Up to 96 kHz sample rates supported with Pro Tools LE software.
** Mixing 5.1 surround sound in Pro Tools LE requires Complete Production Toolkit
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
|
The all new 896mk3 FireWire audio interface delivers high-end performance, superb sound, innovative new features and enhanced standard features that remain unique.
The 896mk3 provides eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces.
The 896mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 896mk3 provides 28 separate inputs and 32 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
When recording from the mic/guitar inputs, the 896mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the 896mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.
The 896mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
| GUITAR LINK UCG102 The Ultimate Guitar-to-USB Interface to Jam and Record with Killer Modeling Amps and Effects
- Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
- Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
- Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
- Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
- Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
- Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
- Powered via USB—no additional power supply required
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The UCG102 is a USB interface that, like a guitar amp, receives signal from your guitar via a 1/4" input jack. A built-in USB cable then sends signal directly to your computer, where the amazing included software package simulates guitar amps and stomp boxes, in addition to tracking your latest masterpiece. It has a 1/4" headphone jack and PHONES volume dial so you can monitor your performance as you record, a CLIP LED to tell you when your signal is too hot, and a HI/LO level selector.
Super Software
The UCG102 comes packaged with Native Instruments' "Guitar Combos" software that models guitar amps and stomp boxes. Take your pick of the "PLEXI COMBO“, "TWANG COMBO” or "AC BOX COMBO” for stunningly real amplifier tones. Sample them all, then activate the full version of the classic rockin' "AC BOX COMBO" rig. Native Instruments extends special offers to all registered Guitar Combos users, making it more affordable than ever to take advantage of their award-winning GUITAR RIG software packages. Visit http://co.native-instruments.com/index.php?id=4101&prid=247&redirected=1 for the latest special pricing on this incredible software.
You also get energyXT2.5 BEHRINGER Edition, a multi-track recording program.
This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode. To learn more about energyXT Compact BEHRINGER Edition, visit http://www.behringer.com/EN/Support/energyXT.aspx. |
Turn your computer into a powerful digital audio workstation with eight mic inputs. Or add eight high-quality mic/instrument inputs to your current system.
The 8pre FireWire audio interface delivers everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation. The 8pre provides eight microphone/instrument preamps with pristine 96kHz analog recording and playback, combined with 8 channels of ADAT optical digital I/O. Expand your system by connecting additional 8pres or other MOTU FireWire audio interfaces.
The 8pre as your primary audio interface
Use the included CueMix™ software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. Two ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at any sample rate up to 96kHz.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 8preʼs main outs or headphone jack — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console™ software, just like a large studio console.
The 8pre includes a 16-channel MIDI interface. Simply plug in your FireWire cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software.
The 8pre provides cross-platform compatibility with Mac OS X 10.3 or higher, Windows XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
The 8pre as a microphone preamp expansion interface
The 8pre is really two products in one. When it is not connected to a computer via FireWire, the 8pre functions as an eight-channel analog to digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler or even another 8pre via the optical "lightpipe” connection to add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100% pristine sound is maintained, down to the very last sample.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
The 8pre is the perfect way to instantly add eight more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828mkII, 896HD or Traveler, the 8pre inputs appear directly in the host interface's CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit — even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.
If you have a 2408mk3, digital mixer or other audio device that supports 96kHz optical and also has two optical inputs, the 8pre connects to it via both optical ports to provide a full eight channels of analog to optical conversion at the 88.2 or 96kHz sample rates.
|
Reviews
There are no reviews yet.