APOGEE X-VID EXPANSION CARD FOR Video I/O for Big Ben

462.73 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal […]

 

Read more

The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR’s.

The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal

•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal

•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently

 

Features

  • Support for PAL, NTSC and 60 Hz B&W standards
  • One composite video input and three composite video outputs
  • Can operate as a master black-burst generator
  • Can operate as genlocking slave device

 

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “APOGEE X-VID EXPANSION CARD FOR Video I/O for Big Ben”

Your email address will not be published. Required fields are marked *

Quick Comparison

APOGEE X-VID EXPANSION CARD FOR Video I/O for Big Ben removeTASCAM DP-24 SD Digital recording system removeTASCAM DP-32 SD 32-Track Digital Portastudio removeTASCAM DR-70D Digital portable recorder removeFOCUSRITE LIQUID MIX HD Plugin for Pro Tools HD removeKORG TMR-50 BK Digital metronome, tuner and recorder remove
NameAPOGEE X-VID EXPANSION CARD FOR Video I/O for Big Ben removeTASCAM DP-24 SD Digital recording system removeTASCAM DP-32 SD 32-Track Digital Portastudio removeTASCAM DR-70D Digital portable recorder removeFOCUSRITE LIQUID MIX HD Plugin for Pro Tools HD removeKORG TMR-50 BK Digital metronome, tuner and recorder remove
Image
SKUX-VIDTAEM000544TAEM000555TAEM000574LIQUID MIX HDTMR-50-BK
Rating
Price 462.73 incl. GR VAT 469.00 incl. GR VAT 625.00 incl. GR VAT 340.00 incl. GR VAT 242.41 incl. GR VAT 51.35 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

In stock

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.

The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal


•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal

•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently

 

Features
  • Support for PAL, NTSC and 60 Hz B&W standards
  • One composite video input and three composite video outputs
  • Can operate as a master black-burst generator
  • Can operate as genlocking slave device

 

The DP-24SD Digital Portastudio is a 24-track workstation, allowing eight tracks of simltaneous recording. The built-in mixer includes everything you need for a professional-sounding mix, from EQ and reverb to amp simulation and multi-band mastering effects. The Digital Portastudio series creates finished productions without the need for a computer, instead using a simple-to-use control surface to keep you creative. 

For clear display of your mix, the DP-24SD has a large color LCD displaying tracks, meters, and effects parameters. A set of 12 encoders control EQ, effects sends, and panning. Built-in effects include compression, guitar amp modeling, delay, reverb, with a total of 10 effects processirs available during mixing. 

Eight XLR mic/line inputs each provide phantom power for condenser microphones, switchable in banks of four. One input includes an instrument-level impedence switch for direct input recording of guitar or bass. Balanced monitor outputs and effects sends are also provided on the rear panel. A USB output allows tracks and mixes recorded to your SD card to be transferred to a computer for CD burning or sharing online. 

For a complete music production on a desktop, there's no simpler choice than the DP-24SD.

DP-24SD SPECIFICATIONS
Recording Media SD (512MB – 2GB) / SDHC card (4GB – 32GB)
File System SD card:FAT16 / SDHC card:FAT32
INPUT A-H
 
XLR
 
Connector XLR-3-31(1:GND, 2:HOT, 3:COLD), Balanced
Input impedance 2.4k ohms
Nominal input level -14dBu
Maximum input level +2dBu
TRS
 
Connector 6.3mm(1/4“)TRS phone jack, Balanced
Input impedance 22k ohms or more
/ 1M ohms(when INPUT H, GUITAR selected)
Nominal input level +4dBu
Maximum input level +20dBu
STEREO OUT
 
Connector RCA pin-jack, Unbalanced
Output impedance 200 ohms
Nominal output level -10dBV
Maximum output level +6dBV
EFFECT SENDS  
Connector 6.3mm(1/4“)TS phone jack, Unbalanced
Output impedance 200 ohms
Nominal output level -10dBV
Maximum output level +6dBV
MONITOR OUT  
Connector 6.3mm(1/4“)TRS phone jack, Balanced
Output impedance 200 ohms
Nominal output level -2dBu
Maximum output level +14dBu
PHONES
 
Connector 6.3mm(1/4“)stereo phone jack
Maximum output level 70mW + 70mW (THD+N 0.1% or less, 32 ohms loaded)
USB  
Connector
USB Mini-B type 4-pin
Format USB2.0 High-Speed mass-storage class
REMOTE
 
Connector
2.5mm TRS jack
Power Dedicated AC adapter (TASCAM GPE248-120200-Z, included)
Power consumption 12W (when phantom power supplying)
Dimensions 514(W)×100.4(H)×336.9(D)mm / 20.2“(W)×4.1“(H)×13.4""(D)
Weight 6.2kg / 13.67 lb
Accessories AC adapter, 4GB SD card, warranty card, owner's manual

 

Audio performance
Frequency response 20Hz to 20kHz (+/-1dB, INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N Ratio 90dB or greater (INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
THD 0.01% or less (INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)

 

Operating system requirements
Windows  
OS Windows XP, Windows Vista, Windows 7, Windows 8
CPU Pentium 300MHz or more
Memory 128MB or more
USB USB2.0
Macintosh  
OS Mac OS X Snow Leopard(V10.6), OS X Lion(V10.7), OS X Mountain Lion(V10.8), OS X Mavericks(V10.9)
CPU Power PC, iMAC, G3, G4 266MHz or more
Memory 64MB or more
USB USB2.0

 

Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording. For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example. Main Features 32-track digital Portastudio 8 mono tracks, 12 stereo tracks (can also be used as mono tracks) Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution Simultaneous playback of all 32 tracks Virtual tracks for alternate takes and undo Dedicated stereo master track Colour LC display and 12-encoder channel strip for simple operation Built-in 40-channel mixer Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track Dedicated controls for EQ, pan and effect sends Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording 8 balanced microphone inputs on balanced combo XLR/jack connectors Switchable phantom power for 4 channels each One input switchable to instrument level for direct recording of a guitar or bass Unbalanced stereo output (RCA jacks) Balanced stereo monitor output (6.3-mm TRS jacks) Two unbalanced effect sends (6.3-mm TS jacks) Stereo headphones output (6.3-mm TRS jack) MIDI input and output for MMC, Control Change and MTC output Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory) Input effects (Limiter, Compressor, Noise suppressor, Exciter) Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter) Mixdown effects (Reverb, Delay, Stereo chorus) Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping) Mark function (up to 99 location marks) Built-in chromatic tuner and metronome CD-RW drive for audio CD creation as well as file import and export USB 2.0 port for data backup/restore and file transfer with a computer Specifications Recording media and file systems Recording media        SD card (512 MB to 2 GB) SDHC card (4–32 GB) File system        SD card (512 MB to 2 GB): FAT16 SDHC card (4–32 GB): FAT32 Analogue audio inputs and outputs MIC/LINE INPUTS A–H, XLR (balanced) Connector        XLR-3-31 (1: GND, 2: HOT, 3: COLD) Input impedance        2.4 kOhm Nominal input level        –14 dBu Maximum input level        +2 dBu MIC/LINE INPUTS A–H, phone jack (balanced) Connector        6.3-mm TRS phone jack Input impedance        >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR) Nominal input level        +4 dBu Maximum input level        +20 dBu STEREO OUT L/R connectors        RCA pin jack Nominal output level        –10 dBV Maximum output level        +6 dBV Output impedance        200 Ohm EFFECT SENDS 1/2 connectors        6.3-mm TS phone jack Nominal output level        –10 dBV Maximum output level        +6 dBV Output impedance        200 Ohm MONITOR OUT L/R connectors        6.3-mm TRS phone jack Nominal output level        –2 dBu Maximum output level        +14 dBu Output impedance        200 Ohm PHONES connector        6.3-mm TRS phone jack Maximum output power        70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load) Other inputs and outputs MIDI input (MIDI IN)        DIN 5 pin Format        Standard MIDI format MIDI output (MIDI OUT)        DIN 5 pin Format        Standard MIDI format USB connector        USB 4-pin mini-B type Format        Mass Storage Class USB 2.0 High Speed REMOTE connector        2.5-mm TRS jack Audio performance Frequency response        20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Distortion        ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) S/N ratio        ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Audio performance Frequency response        20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Distortion        ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) S/N ratio        ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Operating system requirements Windows        Pentium 300 MHz or faster 128 MB or more memory Macintosh        Power PC, iMac, G3, G4 266 MHz or faster 64 MB or more memory Recommended USB port        USB 2.0 Recommended USB host controller        Intel chipset Supported operating systems        Windows XP, Windows Vista, Windows 7 Mac OS X 10.2 or later Power requirements and other specifications Power supply        AC adaptor (TASCAM PS-1225L) Power consumption        12 W (Phantom power on) Dimensions (Width x Height x Depth, excluding projections)        514 mm x 104 mm x 340 mm Weight        6.2 kg Operating temperature        5–35 °C Design and specifications subject to change without notice.Specifications:
  • Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
  • Recording format
•    WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit •    BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit
  • Number of channels: 4-channel (stereo × 2, mono × 4)
  • Analog audio input
•    Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack Set to "MIC / MIC+PHANTOM“ •    Input impedance: 2k ohms •    Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH) •    Maximum input level: 0dBu •    Minimum input level: -72dBu •    MIC input gain: TRIM MAX •    LOW: +11dB •    HIGH: +51dB •    HI + PLUS:  +63dB
  • Set to "LINE“
•    Input impedance: 10k ohms or more •    Standard input level: +4dBu •    Maximum input level: +20dBu
  • 1/2 connector
•    Connector: 3.5mm(1/8“)stereo mini jack  (this connector can be supplied plug-in power) •    Input impedance: 10k ohms •    Maximum input level: +10dBV •    Minimum input level: -50dBV •    MIC input gain: TRIM MAX •    LOW: +3dB •    HIGH: +26dB •    HI + PLUS: +38dB
  • CAMERA IN connector
•    Connector: 3.5mm(1/8“)stereo mini jack •    Input impedance: 10k ohms •    Standard input level: -10dBV •    Maximum input level: +6dBV Analog audio output
  • LINE OUT connector
•    Connector: 3.5mm(1/8“)stereo mini jack •    Output impedance: 200 ohms •    Standard output level: -10dBV •    Maximum output level: +6dBV
  • CAMERA OUT connector
•    Connector: 3.5mm(1/8“)stereo mini jack •    Output impedance: 200 ohms •    Standard output level: -40dBV •    Maximum output level: -24dBV
  • PHONES connector
•    Connector: 3.5mm(1/8“)stereo mini jack •    Maximum output level: 20mW + 20mW USB •    Connector: Micro-B type •    Format: USB2.0 HIGH SPEED mass storage class
  • REMOTE Connector: 2.5mm TRS jack
  • Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
  • Power consumption: 5.0W
  • Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
  • Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
  • Weight: 625g ( including batteries) / 530g (without batteries )

Liquid Mix HDLiquid Mix HD | TDM Plugin for Pro Tools HD

Key Features
Variety of Classic Emulations
40 compressors and 20 EQs, sampled from vintage originals with a free expanding library online.
Dynamic Convolution Technology
The unique patented Dynamic Convolution process delivers unparalleled EQ and Compression emulations.
Ultra-Low Latency for Recording
With the ultra-low latency of Liquid Mix HD (just 12 samples), it can now be used for recording and live sound applications
Optimised for Pro Tools HD
Over one hundred simultaneous mono instances can be run at 44.1/48kHz on an HD3 system.
Full Control Surface Mapping
Pro Tools TDM format ensures full control mapping on all major Pro Tools control surfaces, including ICON and VENUE.
Unique Hybrid Super EQ
Create your own totally unique 7-band super EQ, built out of separate classic EQ bands.
Compressor 'Free' Mode
Vintage compressors with limited controls can now be set to provide fully variable Attack, Release and Ratio.
Automation and Full Recall
Perfect integration with Pro Tools HD allows for automation of parameters and full recall within your session.

Tuner + Metronome + Recorder - All in One Unit!
The TMR-50 - Your Ideal Practice Partner

Highlights:

  • Tuner, metronome, and recorder can be used simultaneously or independently.
  • Internal mic and speaker make it easy to record and play back your performance
  • Loop Play function lets you repeat a desired region of a recorded track
  • High-quality linear PCM recording/playback
  • Record up to 100 tracks (approximately total 20 minutes)
  • USB port lets you transfer recorded data and song files between the TMR-50 and your computer
  • Newly designed highly responsive LCD needle-type meter
  • Wide detection range from C1 to C8
  • The Sound Out function produces a reference tone in a three-octave range from the built-in speaker
  • The Sound Back function generates the reference tone that's closest to the input sound, while the meter indicates the pitch discrepancy between the reference and the input sound - a great function for ear training!
  • Calibration supports a range of concert pitches
  • Marks indicate pure major and minor third intervals
  • Wide tempo range of 30--252 beats per minute
  • 15 rhythm variations let you practice with a broad range of musical styles
  • Easy tempo settings with two types of tempo step patterns plus a tap tempo function
  • Large LCD with backlight brightness that's adjustable over two levels for enhanced visibility
  • Your choice of body color: black or pearl white
  • Convenient key layout, and newly designed stand and battery cover
  • Memory Backup and Auto Power Off

Korg's popular TM series of tuner/metronome units is loved by players who practice to perfect their musical skills. Now joining the lineup is the TMR-50, which adds recorder functionality to the already impressive list of features. An extremely valuable way to improve your playing ability is to identify the problem areas that need work, and then practice to improve those areas. With its built-in mic and speaker, the TMR-50 makes it easy to practice this way. It provides high-quality linear PCM recording and a USB port for convenient usage with your computer. The TMR-50 features equally robust capabilities for its tuner and metronome functionality that will help you improve your sense of pitch and rhythm. Two choices of color are available: black and pearl white. Whether you're in a brass band or an orchestra, the TMR-50 is the ideal partner for anyone who wants to improve their playing.

Specifications

Recording format:

PCM audio format, WAV format (extension: .wav) 44.1 kHz@16-bit

Available recording time:

Maximum approx. 20 minutes (Internal Memory size is 120 MB)

Total number of tracks:

Up to 100 tracks

Tuning:

12 note equal temperament

Detection range:

C1 (32.70 Hz) ~ C8 (4186 Hz), Using Sine Wave.

Reference tone:

            C3 (130.81 Hz) ~ C6 (1046.50Hz), 3 Octave.

Tuning Mode:

            Meter Mode (AUTO), Sound Out Mode (MANUAL), Sound Back Mode (AUTO)

Calibration range:

A4 = 410 ~ 480 Hz (1 Hz steps)

Detection accuracy:

+/- 1 cent

Sound precision:

+/-1 cent

Tempo range:

Quarter Note = 30 to 252 BPM

Tempo setting:

3 Types:       Pendulum Step

Full Step

Tap Tempo

Beat range:

            Total 10 beats: "0 to 9" as "Quarter-note" Rhythm

Rhythm pattern:

Duplets, triplets, triplets without the center beat, quadruplets, and quadruplets without the center beats

Tempo accuracy:

±0.3%

Terminals:

            Input (f6.3mm, Mono-Standard Jack type)

            Headphones (f3.5mm, Stereo-mini Jack type)           

            USB (mini-Type B)      

Internal Speaker:

            Dynamic Speaker (f28 mm)                                                             

Power (Battery):

AAA battery (3.0 V) x 2

Manganese batteries or alkaline batteries, Ni-MH: Nickel metal hydride

Battery Life:

Recorder ... Approximately 16/13/11 hours

(Backlight: off/soft/auto, using alkaline batteries. Maximum of 20 minutes per

recording.)

Tuner ... Approximately 24/22/20 hours

(Backlight: off/soft/auto, A4 continuous input, using alkaline batteries)

Metronome ... Approximately 18/16/14 hours

(Backlight: off/soft/auto, tempo 120, 4 beats, maximum volume, using alkaline batteries)

Dimensions (W x D x H):

111 x 82 x 18 mm / 4/37 x 3.23 x 0.71 inches

Weight:

119 g / 4.19 oz (Including battery)

Included items:

AAA battery (3.0 V) x 2 for verifying proper operation

USB Cable

Options:

            Contact Mic = CM-100L

Computer Requirements

Windows:

A computer that satisfies the operating requirements of Microsoft Windows XP/Windows Vista/Windows 7 and is equipped with a USB port

Macintosh:

            Mac OS X 10.5 or later

 

Weight0.30 kg10.00 kg6.20 kg0.60 kg1.00 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 10.00 kg
Weight 6.20 kg
Weight 0.60 kg
Weight 1.00 kg
Weight 0.30 kg