| Content |
Technical Specifications
- DAC: TI PCM5102
- Inputs: Airplay / UPnP, SPDIF (Coax), Toslink Optical
- Frequency response: 10Hz — 20kHz, ±0.1dB
- Total Harmonic Distortion + Noise: 0.002%
- Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
- Line output level: 2.15Vrms
- Supported sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Bit depth: 16-bit, 24-bit
- Power requirements: 7W max
- Dimensions (wxdxh, mm): 190 x 120 x 44
- Weight: 1.1kg
|
Model A7
Description Wireless Music System
Technical features Apple® AirPlay® technology
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
USB streaming from PC / Mac®
Flowport™
Remote control
Drive units 2x 25mm (1.0in) Nautilus™ tube aluminium tweeter
2x 75mm (3.0in) Midrange
1x 150mm (6.0in) Subwoofer
Frequency response 40Hz - 36kHz ±3dB on reference axis
Frequency range -6dB at 36Hz and 42kHz
Amplifier power output 2x 25W (tweeter)
2x 25W (midrange)
1x 50W (subwoofer)
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 100 W
Standby power consumption |
Transmits both pre-amp out and LFE signals
Eliminates subwoofer cables, sending uncompressed bass signals to your subwoofer
Has an external antenna for up to 50 feet of high-quality transmission
Transmitter dimensions: 1" x 5" x 3“
Receiver dimensions: 2-3/4" x 1-3/4" x 1-3/4“
Converts any of the subwoofers
Pro440wi- Pro550wi – Pro660wi literally in seconds. |
Sound Bar Drivers: 6 x 3.0” mid woofer drivers, 3 x 1”
aluminum dome tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs/Outputs: HDMI 1.4a in (3), HDMI 1.4a out (1),
Toslink Optical input (1), Analog 3.5 mm mini-jack AUX
(1), USB-A for firmware updates and phone charging
Sub Drivers: Drivers: 1 x 8” sub
Wireless Sub
Wireless Connectivity: 2.4GHz & 5.8GHz | Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
- For use with DN-202WT
- Receives audio up to 30m (100 ft) without wires
- Use multiple DN-202WR in a system for more coverage
- XLR and 1/4” audio outputs
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
| Audioengine D2 Premium 24-bit Wireless DAC
Audioengine D2 Premium 24-bit Wireless DAC allows you to stream wireless HD audio from your computer to any music system, independent of your Wi-Fi network. D2 includes USB and optical inputs, a high-performance DAC, plus the isolation benefits of wireless. Setup is fast and simple, with no software to install and without the frustration of trying to connect to your network.
D2 Technical Specifications
DAC typeDual Mode USB and Optical (SPDIF) wireless DAC
InputsUSB/Optical (SPDIF)
OutputsRCA Stereo/Optical (SPDIF)
D/A converterPCM1792A
Optical receiverAK4117
USB controllerTI1020B
Full-scale output2.0V RMS (RCA)
Output impedance100 ohms
Power source
Sender: USB 5V or included external supply
Receiver: Included external supply
Power requirements
Sender: 270mA
Receiver: 300mA
USB power filtering3-stage redundant regulation
SNR>115db
THD+N |
Reviews
There are no reviews yet.