ARCAM irDAC II Wireless Bluetooth DAC

The new irDAC-II continues the story adding Bluetooth connectivity, headphone output and DSD128 support. The irDAC-II comes packed with cutting edge technology and features that will benefit the most demanding user. We have gained a lot of knowledge developing class leading DACs. Areas like isolation of the digital and analogue stages, ultralow noise power supplies and a direct coupled signal path make a big difference. We use the outstanding ESS Sabre DAC to obtain performance that we believe will be unmatched in this price category. Jitter reduction is an obsession within our engineering team. They have applied their experience in the irDAC-II to produce a signal that is almost jitter free. The headphone output stage has been taken from the flagship A49 amplifier and is capable of driving the most demanding of headphones. Both fixed and variable line outputs are also available, allowing for ultimate system building flexibility.

The irDAC-II is designed to be the heart of a digital system and can be connected to a host of different types of digital sources and connections. This includes asynchronous USB and Bluetooth. All of the inputs can be controlled through an IR remote that will also give you transport control of a PC or Mac USB source via the HID (Human Interface Device) control.

• Mini component wireless DAC
• High performance headphone amplifier
• AptX Bluetooth wireless streaming
• ESS ES9016 Sabre DAC chipset
• High precision digital reclocking
• Up to 24/384 via USB
• Up to 24/192 via coax
• Up to 24/96 via optical
• DSD128 via USB
• Isolated digital and analog direct coupled circuits
• Individually regulated power supplies
• 2x digital coax inputs Fixed and variable
• Headphone output (30 to 600Ω)
• 4 layer PCB
• Aluminum case with non‐slip rubber base
• 12V external power supply included
• Mini remote control included
• Weight: 2.4 lbs (1.1kg)
• Packaged weight: 5 lb (2.1 kg)
• Packaged dimensions (W x D x H): 10.1\'\' x 12.1\'\' x 2.3\'\' (260 x 310 x
60mm)
• EAN: 506013360254‐5

Supported sample rates:

• USB: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 384kHz
• Optical: 44.1kHz, 48kHz, 88.2kHz, 96kHz
• Coaxial: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
• Bluetooth: SBC, AAC, aptX, aptX:LL
• Bit Depth : 16:bit, 24:bit
• Headphone : 30Ω : 600Ω, 3.5mm plug
• Power requirements: 18W max
• Dimensions: W194 x H44 x D124mm
• Weight: 1.1kg

• For use with DN-202WT
• Receives audio up to 30m (100 ft) without wires
• Use multiple DN-202WR in a system for more coverage
• XLR and 1/4” audio outputs
• External, articulating antennas ensure optimum transmission and reception
• Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more

Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality.

• Audiophile Bluetooth Music Converter
• High quality music replay from mobile devices
• Burr Brown PCM5102 24bit DAC
• Uses aptX™ streaming technology
• High-end audio circuitry and components
• High quality cast aluminium casework

The rBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!

The rBlink comes housed in a stylish yet rugged cast aluminium case and is small and discreet enough to sit proudly next to your HiFi system just getting on with the job of delivering great music.

• DAC: TI PCM5102
• Frequency response: 10Hz — 20kHz, ±0.1dB
• Total Harmonic Distortion: + Noise 0.002%
• Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
• Line output level: 2.15Vrms

• Supported CODECs: SBC, AAC, aptX®
• Power requirements: 0.7W max
• Dimensions (wxdxh, mm): 75 x 100 x 26
• Weight: 350g

Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.

With countless Bluetooth-enabled audio sources roaming the planet, the DN-200BR interfaces them all with a professional audio system for sound reinforcement, special event or retail applications. It receives Bluetooth signals wirelessly, then routes the audio to balanced XLR or ¼-inch outputs for integration with mixers and amplification systems. Its Bluetooth Pairing mode ensures a secure connection.

• Adds Bluetooth to any audio system
• Balanced XLR and unbalanced 1/4-inch audio outputs
• Up to 33m (100 ft) range
• Discreet, robust build quality that can mount nearly anywhere

Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.

Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.

The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!

• DAC
  Burr-Brown/TI PCM5102
• Frequency Response
  10Hz-20kHz, +0 -0.2dB
• Total Harmonic Distortion + Noise
  0.002%
• Signal-to-noise ratio (A-weighted)
  106dB (24-bit)
• Maximum output level
  2.15V RMS

• Supported CODECS
  SBC, AAC, aptX™
• Power requirements
  0.7W maks.
• Dimensions
   L 60 x W 30 x H 75mm
• Weight
  40g
• EAN/UPC code
  5 060133 602194