| Content |
Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.
Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.
The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
Specifications
- DAC
Burr-Brown/TI PCM5102
- Frequency Response
10Hz-20kHz, +0 -0.2dB
- Total Harmonic Distortion + Noise
0.002%
- Signal-to-noise ratio (A-weighted)
106dB (24-bit)
- Maximum output level
2.15V RMS
- Supported CODECS
SBC, AAC, aptX™
- Power requirements
0.7W maks.
- Dimensions
L 60 x W 30 x H 75mm
- Weight
40g
- EAN/UPC code
5 060133 602194
| The best of all worlds - amazing sound, effortless wireless streaming with AirPlay®, a LightningTM connector for docking the latest generation of iPhones® and iPods® and a design that fits almost anywhere. Versatility, convenience and stunning performance; Z2 is the dock that has it all.
| Model |
Z2 |
| Description |
Wireless Music System |
| Technical features |
Apple® AirPlay® technology
Lightning connector
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
FlowportTM
Remote control |
| Drive units |
2x 87.5mm (3.5in) full range |
| Frequency response |
50Hz - 20kHz ±3dB on reference axis |
| Frequency range |
-6dB at 42Hz and 22kHz |
| Amplifier power output |
2x 20W |
| Input voltage |
100V - 240V ~ 50/60Hz |
| Rated power consumption |
36W |
| Standby power consumption |
|
|
Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality.
- Audiophile Bluetooth Music Converter
- High quality music replay from mobile devices
- Burr Brown PCM5102 24bit DAC
- Uses aptX™ streaming technology
- High-end audio circuitry and components
- High quality cast aluminium casework
The rBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
The rBlink comes housed in a stylish yet rugged cast aluminium case and is small and discreet enough to sit proudly next to your HiFi system just getting on with the job of delivering great music.
Technical Specifications
- DAC: TI PCM5102
- Frequency response: 10Hz — 20kHz, ±0.1dB
- Total Harmonic Distortion: + Noise 0.002%
- Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
- Line output level: 2.15Vrms
- Supported CODECs: SBC, AAC, aptX®
- Power requirements: 0.7W max
- Dimensions (wxdxh, mm): 75 x 100 x 26
- Weight: 350g
|
- For NAVIS Series Speakers
- Wireless Source-to-Speaker Connection
- Sends Uncompressed Audio
- 5 Hz to 22.1 kHz Frequency Range
Go wireless with the AirX2 NAVIS Transmitter from ELAC. Using 2.4 GHz wireless technology, the AirX2 NAVIS offers you the freedom to connect your source to your NAVIS speakers easily and without running unsightly cables across the room. It transmits uncompressed audio and is equipped with a pair of RCA inputs for easy connection to your audio source. Included in the package is a power adapter and a set of international AC plugs.
Wireless
Transmitter Interfaces
| Input Connectors |
1 x 2RCA (Stereo Analog) Female |
Power
| Power Connector |
1 x Barrel (7.5 VDC) Input |
General
| Dimensions |
3.7 x 3.62 x 1.54" / 94 x 92 x 39 mm |
| Weight |
0.44 lb / 0.2 kg |
| Audioengine B2 Premium Bluetooth Speaker
Send all your music wirelessly from your iDevice or tablet directly to the B2 Powered Speaker.
Wirelessly
stream all your music from any Bluetooth®-enabled device. Your
computer, iDevice, or Android phone already has Bluetooth, so get more
out of your music with the B2 wireless speaker. Experience award-winning
Audioengine® stereo sound, including a hand-built wood cabinet,
Bluetooth® aptX® and extended wireless range.
Easy setup
Setup
and pairing is really easy and no special software is needed. Hereʼs
how to connect B2 to your tablet, computer, or smartphone:
Remove B2 from its packaging and attach the Bluetooth antenna to the rear panel.
Connect the power cable to B2 rear panel and plug the other end into an AC outlet.
Turn on the power switch and B2 will automatically go into pair mode.
On your device, turn on Bluetooth and select "Audioengine B2” to pair and connect.
Play your music and adjust the volume.
Yep, it really is this easy to get B2 up and running!
Versatile
The
audio quality of most Bluetooth products isn't usually very inspiring
and their limited range can be frustrating. The B2 solves these problems
by implementing the aptX codec, which is a high-quality audio converter
designed specifically for audio. The B2 also has special circuitry and a
precision-tuned antenna to extend the wireless range, providing much
more versatility than other Bluetooth speakers.
Upgrade your Bluetooth
You
already have Bluetooth on your tablet, computer, or iDevice, so get
more out of it and experience stunning audio with the Audioengine B2
Bluetooth Speaker including aptX, extended range, hand-built wood
cabinet, and custom speakers.
See and hear the difference
The
hand-finished all-wood cabinet of the B2 reflects traditional
Audioengine design and the high-quality components and audio fidelity
are typical of Audioengine's commitment to great sound at affordable
prices. The Audioengine B2 continues to close the gap between your
computer music and home hi-fi and even if you're not an audio enthusiast
we guarantee your music will sound better!
| Type |
Powered Bluetooth speaker |
| Inputs |
Bluetooth, 3.5mm stereo mini-jack analog |
| Power Output |
60W peak total |
| Input Impedance |
10K ohms unbalanced |
| Frequency Response |
65Hz - 22kHz (+/-2dB) |
| SNR |
>95db (typical A-weighted) |
| THD+N |
|
| Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
- For use with DN-202WT
- Receives audio up to 30m (100 ft) without wires
- Use multiple DN-202WR in a system for more coverage
- XLR and 1/4” audio outputs
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
|
Reviews
There are no reviews yet.