| Content |
Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.
Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.
The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
Specifications
- DAC
Burr-Brown/TI PCM5102
- Frequency Response
10Hz-20kHz, +0 -0.2dB
- Total Harmonic Distortion + Noise
0.002%
- Signal-to-noise ratio (A-weighted)
106dB (24-bit)
- Maximum output level
2.15V RMS
- Supported CODECS
SBC, AAC, aptX™
- Power requirements
0.7W maks.
- Dimensions
L 60 x W 30 x H 75mm
- Weight
40g
- EAN/UPC code
5 060133 602194
|
Sound Bar Drivers: 6 x 3.0” mid woofer drivers, 3 x 1”
aluminum dome tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs/Outputs: HDMI 1.4a in (3), HDMI 1.4a out (1),
Toslink Optical input (1), Analog 3.5 mm mini-jack AUX
(1), USB-A for firmware updates and phone charging
Sub Drivers: Drivers: 1 x 8” sub
Wireless Sub
Wireless Connectivity: 2.4GHz & 5.8GHz |
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
|
Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
With countless Bluetooth-enabled audio sources roaming the planet, the DN-200BR interfaces them all with a professional audio system for sound reinforcement, special event or retail applications. It receives Bluetooth signals wirelessly, then routes the audio to balanced XLR or ¼-inch outputs for integration with mixers and amplification systems. Its Bluetooth Pairing mode ensures a secure connection.
- Adds Bluetooth to any audio system
- Balanced XLR and unbalanced 1/4-inch audio outputs
- Up to 33m (100 ft) range
- Discreet, robust build quality that can mount nearly anywhere
| Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
- For use with DN-202WT
- Receives audio up to 30m (100 ft) without wires
- Use multiple DN-202WR in a system for more coverage
- XLR and 1/4” audio outputs
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
| Audioengine D2 Premium 24-bit Wireless DAC
Audioengine D2 Premium 24-bit Wireless DAC allows you to stream wireless HD audio from your computer to any music system, independent of your Wi-Fi network. D2 includes USB and optical inputs, a high-performance DAC, plus the isolation benefits of wireless. Setup is fast and simple, with no software to install and without the frustration of trying to connect to your network.
D2 Technical Specifications
DAC typeDual Mode USB and Optical (SPDIF) wireless DAC
InputsUSB/Optical (SPDIF)
OutputsRCA Stereo/Optical (SPDIF)
D/A converterPCM1792A
Optical receiverAK4117
USB controllerTI1020B
Full-scale output2.0V RMS (RCA)
Output impedance100 ohms
Power source
Sender: USB 5V or included external supply
Receiver: Included external supply
Power requirements
Sender: 270mA
Receiver: 300mA
USB power filtering3-stage redundant regulation
SNR>115db
THD+N |
Reviews
There are no reviews yet.