| Content |
Streaming high quality music from your favourite mobile device is now easy with the rBlink Bluetooth** audio converter. Engineered by Arcam, and using the aptX®* transmission system, the rBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a HiFi system with stunning quality.
- Audiophile Bluetooth Music Converter
- High quality music replay from mobile devices
- Burr Brown PCM5102 24bit DAC
- Uses aptX™ streaming technology
- High-end audio circuitry and components
- High quality cast aluminium casework
The rBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
The rBlink comes housed in a stylish yet rugged cast aluminium case and is small and discreet enough to sit proudly next to your HiFi system just getting on with the job of delivering great music.
Technical Specifications
- DAC: TI PCM5102
- Frequency response: 10Hz — 20kHz, ±0.1dB
- Total Harmonic Distortion: + Noise 0.002%
- Signal-to-noise ratio (A –Weighted): 106dB (24-bit)
- Line output level: 2.15Vrms
- Supported CODECs: SBC, AAC, aptX®
- Power requirements: 0.7W max
- Dimensions (wxdxh, mm): 75 x 100 x 26
- Weight: 350g
|
Transmits both pre-amp out and LFE signals
Eliminates subwoofer cables, sending uncompressed bass signals to your subwoofer
Has an external antenna for up to 50 feet of high-quality transmission
Transmitter dimensions: 1" x 5" x 3“
Receiver dimensions: 2-3/4" x 1-3/4" x 1-3/4“
Converts any of the subwoofers
Pro440wi- Pro550wi – Pro660wi literally in seconds. |
Model A5
Description Wireless Music System
Technical features Apple® AirPlay® technology
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
Flowport™
Remote control
Drive units 2x 25mm (1.0in) Nautilus™ tube aluminium tweeter
2x 100mm (4.0in) Mid and low range
Frequency response 47Hz - 22kHz ±3dB on reference axis
Frequency range -6dB at 40Hz and 24kHz
Amplifier power output 2x 20W (tweeter)
2x 20W (midrange)
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 48W
Standby power consumption |
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
|
Amplifier power (watts): 20 watts (RMS)
Controls: Volume & power
W x H x D (mm): 387 x 155 x 130
Weight (kg): 2.25
Frequency response (Hz): 70 - 18,000
Connections: Additional stereo input via 3.5mm minijack for use with non-Bluetooth enabled devices
Finish: Black | The best of all worlds - amazing sound, effortless wireless streaming with AirPlay®, a LightningTM connector for docking the latest generation of iPhones® and iPods® and a design that fits almost anywhere. Versatility, convenience and stunning performance; Z2 is the dock that has it all.
| Model |
Z2 |
| Description |
Wireless Music System |
| Technical features |
Apple® AirPlay® technology
Lightning connector
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
FlowportTM
Remote control |
| Drive units |
2x 87.5mm (3.5in) full range |
| Frequency response |
50Hz - 20kHz ±3dB on reference axis |
| Frequency range |
-6dB at 42Hz and 22kHz |
| Amplifier power output |
2x 20W |
| Input voltage |
100V - 240V ~ 50/60Hz |
| Rated power consumption |
36W |
| Standby power consumption |
|
|
Reviews
There are no reviews yet.