FMJ A19 AMPLIFIER Remote controlled integrated amplifier, 50 WPC
Continuous power output (20Hz—20kHz at 0.5% THD), per channel: Both channels, 8Ω, 20Hz—20kHz:
50W, Single channel, 4Ω, at 1kHz: 90W, Harmonic distortion, 80% power, 8Ω at 1kHz: 0.003%
Inputs:
Phono (MM) cartridge: Input sensitivity at 1kHz: 5mV, Input impedance: 47kΩ + 100pF,
Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB, Signal/noise ratio (Awtd) 50W, ref. 5mV
input: 80dB, Overload margin, 50mV at 1kHz: 20dB
Line and AV inputs: Nominal sensitivity: 1V, Input impedance: 10kΩ, Maximum input: 4.6Vrms,
Frequency response: 20Hz—20kHz ± 0.2dB, Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
Outputs:
Preamplifier output:Nominal output level: 630mV, Output impedance: 230Ω
Heaphones Output: Maximum output level into 600Ω: 4V, Output impedance: 1ohm Load range:
16Ω—2kΩ
Accessory power output: Using accessory power cable supplied, provides two 2.1mm DC connectors:
6V, 1A
General
Mains voltage: 110–120V~ or 220–240V~, Power consumption (maximum): 350W
Dimensions W x D x H (including feet): 432 x 275 x 85mm, Weight (net): 8.5kg
Weight (packed): 10.2kg, Supplied accessories: Mains lead, CR108 remote control, 2 x AAA batteries,
Accessory power cable
Dimensions (hwd, cm)
8.5x43x27.5
Power output (watts)
50
Finishes
1
PublishTo
B
Tuner presets
n/a
Speaker outputs
Speaker outputs
Remote control
Yes
SW
No
USB in
No
Preamp out
Yes
Tone controls
No
Tape loops
1
MC phono in
0
Headphone out
Yes
FM
No
DAB
No
MW
No
Integrated
Yes
MM phono in
1
Internet radio
No
Line level in
6
LW
No
Weight
8.00 kg
Reviews
There are no reviews yet.
Be the first to review “ARCAM FMJ A19 Stereo Amplifier” Cancel reply
FMJ A19 AMPLIFIER Remote controlled integrated amplifier, 50 WPC
Continuous power output (20Hz—20kHz at 0.5% THD), per channel: Both channels, 8Ω, 20Hz—20kHz:
50W, Single channel, 4Ω, at 1kHz: 90W, Harmonic distortion, 80% power, 8Ω at 1kHz: 0.003%
Inputs:
Phono (MM) cartridge: Input sensitivity at 1kHz: 5mV, Input impedance: 47kΩ + 100pF,
Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB, Signal/noise ratio (Awtd) 50W, ref. 5mV
input: 80dB, Overload margin, 50mV at 1kHz: 20dB
Line and AV inputs: Nominal sensitivity: 1V, Input impedance: 10kΩ, Maximum input: 4.6Vrms,
Frequency response: 20Hz—20kHz ± 0.2dB, Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
Outputs:
Preamplifier output:Nominal output level: 630mV, Output impedance: 230Ω
Heaphones Output: Maximum output level into 600Ω: 4V, Output impedance: 1ohm Load range:
16Ω—2kΩ
Accessory power output: Using accessory power cable supplied, provides two 2.1mm DC connectors:
6V, 1A
General
Mains voltage: 110–120V~ or 220–240V~, Power consumption (maximum): 350W
Dimensions W x D x H (including feet): 432 x 275 x 85mm, Weight (net): 8.5kg
Weight (packed): 10.2kg, Supplied accessories: Mains lead, CR108 remote control, 2 x AAA batteries,
Accessory power cable
Dimensions (hwd, cm)
8.5x43x27.5
Power output (watts)
50
Finishes
1
PublishTo
B
Tuner presets
n/a
Speaker outputs
Speaker outputs
Remote control
Yes
SW
No
USB in
No
Preamp out
Yes
Tone controls
No
Tape loops
1
MC phono in
0
Headphone out
Yes
FM
No
DAB
No
MW
No
Integrated
Yes
MM phono in
1
Internet radio
No
Line level in
6
LW
No
Class XD™ amplification designed to eliminate crossover distortion at low signal levels New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms. Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box CAP5 protection technology for trouble free operation Acoustically damped full metal chassis with thick brushed aluminium front panel Customisable front panel display Balanced and unbalanced analogue audio inputs for superior connectivity RS232 controllable Eco-friendly Available in black and silver finishes
The 851W has class XD amplification at 200W into 8 Ohms in stereo mode or 500W RMS per amp in mono bridged mode, separate toroidal transformers for the power amp and input/other circuitry, and terrapin impedance buffering modules. All in all it\'s the best sounding amplifier we have ever made.
Our proprietary Class XD amplification Separate toroidal transformers for power amp and input/other circuitry Our bespoke Terrapin impedance buffering modules – separating amplifier and signal impedance 200W into 8 Ohms stereo mode or 500W RMS per amp mono bridged mode CAP5 protection from DC spikes, overheating and clipping All metal chassis with premium components Remote Control – Compatible with the entire 851 range
Power output – stereo/mono 200W per channel into 8 Ohms 350W per channel into 4 Ohms Power output – bridged mono 500W 8 Ohms 800W 4 Ohms THD (unweighted) < 0.001% 1 kHz < 0.005% 20 Hz - 20 kHz Frequency response 5Hz – 80kHz S/N ratio (ref 1W / 8 Ohn) >90dB (unweighted) Sensitivity – stereo or mono 1.5V rms unbalanced 1.5 + 1.5V rms balanced Sensitivity – bridged mono 0.775V rms unbalanced 0.775V + 0.775V rms balanced Input impedances Balanced input 38 kOhm Unbalanced input 68 kOhm Power amp damping factor > 110 at 1 kHz Max. power consumption 2400W Standby power consumption Standby
High sound quality and sophisticated design based on Yamaha\'s rich experience and high-end model concepts. A HiFi Amplifi er for enjoying excellent sound.
Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
Pure Direct Mode for greater sound purity
Simple and sophisticated design
Phono MM terminal for vinyl playback
Screw-type speaker terminals
Speaker selector and speaker terminals for two systems
Simple design remote control
Head phone terminal
Specs
Receiver / Integrated Amplifier
Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe)
140 W + 140 W
Maximum Power(8 ohms, 1 kHz, 10% THD)
100 W + 100 W
High Dynamic Power/Channel (8/6/4/2 ohms)
125 W/150 W/165 W/180 W
Frequency Response
10 Hz-100 kHz(0 ± 0.5 dB / 0 ± 3.0 dB)
Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz)
0.2%
Signal-to-Noise Ratio (CD)
100 dB (S: 500 mV)
Input Sensitivity (CD)
500 mV / 47 k-ohms
Standby Power Consumption
0.5 W
Dimensions (W x H x D)
435 x 141 x 333 mm; 17-1/8" x 5-1/2" x 13-1/8“
Weight
6.7 kg; 14.8 lbs.
Audioengine N22 General Specifications Type: Compact Integrated Stereo Amplifier Power Output: 80W peak total (22W RMS/40W peak per channel), AES Amplifier type: Dual Class A/B Voltages: 110-240V, 50/60Hz auto-switching for worldwide voltages Inputs: RCA and 1/8" (3.5mm) mini-jack Outputs: RCA variable preamp Speaker outputs: 5-way binding posts SNR: >95dB A-weighted THD+N:
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.