Content |
Archon - A new generation of improved speakers for modern indoor spaces
The Archon series of full-range and bi-amped speaker systems have been designed to provide ample bandwidth and high SPL for an accurate sound reproduction in the most various application projects.
With the Archon series FBT wants to meet today’s expectations of the installed sound market: a new generation of improved speakers responding to high quality sound requirements for modern indoor spaces.
The FBT Archon series lines up three 2-way full range/bi-amp models and three 2-way full range compact models; in addition, two low-profile subwoofers (2x8” and 2x15”) increase the low frequency extension of the desired systems. All Archon speakers are elegantly designed and crafted to meet the most demanding architectural design.
The FBT Archon series has been engineered to fulfill the need of high quality sound in bars, pubs, restaurants, retail shops, clubs, entertainment venues, fitness centers, conference rooms, theatres, educational institutions, houses of worship, museums, exhibition centers, cruise ships, corporate A/V, granting excellent speech intelligibility, wide and precise band coverage, ease of installation thanks to the flexible mounting hardware.
Passive Sound Reinforcement 350W / 8 ohm - 121dB SPL
- 1 x 8” (1.5” VC) custom made LF woofer with
- rubber surround
- 1 x 1.5” HF high-end dome tweeter
- 8 x M5 threaded rigging points
- 2-way, passive sound reinforcement systems
- 12mm (0.47”) baltic birch plywood cabinets
- Custom designed LF woofers, made in Italy
- Custom designed HF dome tweeter, Made in Italy
- Crossover networks equipped with 4 x Euroblock speaker terminals; factory preset for optimal line transformer installation
- Multiple M5 threaded rigging points
- Acoustically transparent steel grille and antidust protection cloth
- New FBT rotatable logo badge following vertical or horizontal installation
- Optional mounting hardware
- Optional line transformer 100W
Code: |
36252 |
Configuration: |
2 way |
Recommended amplifier: |
350 W RMS |
Long Term power: |
175 W |
Short term power: |
700 W |
Transformer: |
100/100 V |
Nominal impedance: |
8 ohm |
Frequency response: |
55Hz - 22KHz -6dB |
Low Frequency woofer: |
8 - 1.5 coil inch |
AES power: |
150 W |
High frequency driver: |
1.5 - 1.5 coil dome inch |
Sensitivity (@1W/1m): |
92.5 dB |
Maximum SPL cont/peak: |
118/121 dB |
Dispersion: |
90° HxV |
Crossover Frequency: |
2 KHz |
Recommended HP filter: |
40hz - 25dboct |
Recommended external filter: |
- |
Input connector: |
4 x Euroblock |
Net Dimension (WxHxD): |
248x411x248 - 9.76x16.18x9.76 mm/inch |
Net Weight: |
6.5/14.3 kg/lb |
Transport Dimension (WxHxD): |
330x491x330 - 12.99x19.33x12.99 mm/inch |
Transport Weight: |
8.5 / 18.7 kg/lb |
|
The C4128 is a full range 2 way high sensitivity, dual woofer passive system, compact and versatile specially designed for under balcony applications.
It is designed to provide extended low frequency performance from a compact, vented enclosure. It features advanced technology transducers: two 8" woofers equipped with a 2" voice coil and a 1" neodymium compression driver equipped with a 1.5" voice coil. The compression driver is mounted on a rotatable 90 x 70 constant directivity horn, providing very natural sound reproduction.
The cabinet is asymmetric (15° and 45°) for versatile under balcony applications as well as ceiling/wall installation and floor monitoring operations.
The wide coverage angle and the true constant directivity of the newly designed horn make very easy the coverage of large audiences.
Features |
---|
High efficiency | 1" neodymium compression driver with 1.5" voice coil | Asymmetrical cabinet under-balcony/wedge monitor applications | Active Mosfet Compression Driver Protection | LICC Crossover | 90°x 70° CMD (Constant Matching Design) constant directivity rotatable horn | M10 mounting points |
Applications
- Under Balcony Applications
- Permanent Installations
- Main Reinforcement in small spaces
- Portable Systems AV Presentations
- Zone Delay and Fill Systems
- Stage monitor in multimedia environments, auditoriums house of worship
Acoustical Specifications |
---|
Frequency Response -10 dB: | 100 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 150 Hz | ÷ 15 kHz | Max SPL @ 1m: | 122 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 70° | | Directivity index; Q: | 9.25 | | System Sensitivity: | 96 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 400 Watt | | Peak Power Handling: | 1600 Watt | | Recommended Amplifier: | 800 | | Protections: | Dynamic | | Crossover frequencies: | 2100 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1" HF driver , 1.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 109 dB | | Woofer: | 2 x 8" woofer, 2" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 200 Watts AES | | Sensitivity: | 94 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 10 mm birch plywood construction | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 650 / 25.59 mm/inch | | Width: | 260 / 10.23 mm/inch | | Depth: | 299 / 11.77 mm/inch | | Net Weight: | 17.4 / 38.36 Kg/Lbs |
|
Key Features:
- Compact enclosure
- Dual 205 mm (8 in) LF transducers
- 120° x 60° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm (1 in) exit
compression driver
- Dual Neutrik NL4 connectors plus screw
terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 53 Hz - 20 kHz
Frequency Response (+/-3 dB): 65 Hz - 20 kHz
Horizontal Coverage: 120°
Vertical Coverage: 60°
Directivity Factor (Q): 8.1 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 6.9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 94 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 120 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 375 W / 750 W / 1500 W
AES Standard Power Rating4: 700 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver: 2 x JBL 228J, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in) edge
wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm
(1.5 in) voice coil
High-Frequency Waveguide: PT-D126HF-1 (field rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M8 rear for OmniMount® 60.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to 5.2
sq mm (10 AGW) wire or max width 9 mm (.375 in) spade lugs.
NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental ratings,
use WRC or WRX.
Dimensions (H x W x D): 679.5 x 238.0 254.0 mm
(26.75 x 9.37 x 10 in)
Weight: 18.6 kg (40.9 lb)
|
The P4228 is a weatherproof full range, wide-dispersion, two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1.4” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a double 8” woofer with a 2.5” voice coil. The cabinet is asingle piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped with 4 x M8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 4228 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Features |
---|
Weatherproof cabinet IP 55 | Aluminium grill and stainless steel bracket | Two 8" high-output LF transducer with 2.5" voice coil | Once RCF Precision Neodymium 1.4" Compression Driver with 2.5" voice coil | 110° x 60° constant directivity horn | Built in passive crossover | 2° x 15° enclosure sides for array configurations | Active Mosfet Compression Driver Protection |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | Max SPL @ 1m: | 129 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 60° | | Directivity index; Q: | 9 | | System Sensitivity: | 97 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 400 Watt | | Peak Power Handling: | 1600 Watt | | Recommended Amplifier: | 800 | | Protections: | Dinamyc | | Crossover frequencies: | 1100 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.4“(35.5mm) throat, 2.5" (63.7 mm) coil diaphragm assembly | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 90 Watt AES | | Sensitivity: | 110 dB | | Woofer: | 2x8" (200 mm) woofer with 2.5" (64 mm) coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 300 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 4 pole Amphenol | |
CABINET |
---|
Cabinet Material: | 8 mm Polyethylene rotomoulded | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Gray | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 268 / 10.55 mm/inch | | Width: | 566 / 22.28 mm/inch | | Depth: | 250 / 9.84 mm/inch | | Net Weight: | 13.5 / 29.7 Kg/Lbs |
|
|
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 11
Directivity Index (DI) : 10.5 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.2 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5 : Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m) : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 113 dB SPL
Waveguide : PT-K95MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. White, 8 ohm.
Features:
- Compact box speakers for music and voice paging distribution
- Excellent sound quality
- Octagonal horn design for smooth coverage
- Adjustable high frequency dispersion
- Extruded cabinet design improves low frequency performance
- Individual protection circuit on each component
- Paintable grille and enclosure
- Wall/ceiling-mount bracket included
- Optional board, cluster and pole-mount brackets
- OmniMount-compatible (Series 20.5CA/WA)
- Optional subwoofers, model HB-1, FB-100 or FB-120
- Five year warranty
Specifications:
- LF Driver: 8” cone woofer
- HF Driver: 1” hard-dome tweeter
- Crossover: 2.5kHz
- Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
- Sensitivity (1W, 1m): 93dB SPL
- Dispersion (adjustable):
110° H x 100 ° V
80° H x 80° V
|
Reviews
There are no reviews yet.