RCF ART 710-A MK4 ενεργό ηχείο 2-δρόμων 10″ + 1“, 700Wrms 1400 WATT 2-way peak power 129 dB max spl Innovative DSP Processing 1″ Compression Driver, 1.75″ v.c. 10″ Woofer 90°x70°, wide dispersion constant directivity horn FiRPHASE Technology ART 710-A MK4 is a unique product in its category. The compression driver with custom designed dome […]
1400 WATT 2-way peak power
129 dB max spl
Innovative DSP Processing
1″ Compression Driver, 1.75″ v.c.
10″ Woofer
90°x70°, wide dispersion constant directivity horn
FiRPHASE Technology
ART 710-A MK4 is a unique product in its category. The compression driver with custom designed dome and high power voice coil offers unique vocal clarity and sound projection. The 10” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections.
RCF ART 710-A MK4 ενεργό ηχείο 2-δρόμων 10" + 1“, 700Wrms
1400 WATT 2-way peak power
129 dB max spl
Innovative DSP Processing
1" Compression Driver, 1.75" v.c.
10" Woofer
90°x70°, wide dispersion constant directivity horn
FiRPHASE Technology
ART 710-A MK4 is a unique product in its category. The compression driver with custom designed dome and high power voice coil offers unique vocal clarity and sound projection. The 10” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections.
APPLICATIONS
The LD Systems Roadman 102 is a mobile and compact sound system
The Roadman 102 is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit with handheld mic. A second wireless microphone unit are also available in option.
Product type
Battery-powered PA speaker
Type
Set with Handheld Transmitter
Low/mid driver dimensions
10 "
Woofer Size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
80 W
Peak power
320 W
Frequency response
70 - 16.000 Hz
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-link set (master / slave) , Audio-link slave volume , Bass , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Value Down , Voice priority on / off , Volume Mic 1 , Volume Mic 2
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
3
Line input connectors
2 x RCA , Audio-link input XLR, female
Mic inputs
2
Mic inputs
6.3 mm Jack , XLR
Line outputs
3
Line output connectors
2 x RCA , Audio-link output XLR, male
Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched
Speaker output connections
6.3 mm Jack
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Cabinet material
aluminium , plastic
Cabinet construction
vented
Width
355 mm
Height
610 mm
Depth
315 mm
Weight
19 kg
Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Cassette player available optionally , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle
High-power 300-Watt 2-way PA sound reinforcement speaker system for live and playback applications. "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included). Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection. Additional Line output allows linking of additional speaker systems.
Brand
BEHRINGER
Model
B110D
Part Number
000-ALX
Speaker Type
Active
Speaker Category
Satellite (full range), Floor Monitor
Construction Material
Plastic Cabin
Total Power (Watt)
300
Woofer (inches)
10
Tweeter / Driver (inches)
1,35
Frequency Response (Hz)
45-20000
Weight (kg)
8,1
Color
Black
Application
Portable PA
Series
EUROLIVE series
Warranty
1 Year
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
Speaker stand socket, one aluminium handle
45° monitor taper
Code:
40640
Configuration:
2 way
Built-in amplifier LF/HF:
700/200 W RMS
Built-in amplifier peak LF/HF:
1400/400 W
Frequency response:
58Hz - 20KHz -6dB
Low Frequency woofer:
10 - 2 coil inch
High Frequency driver:
1 - 1.4 coil inch
Maximum SPL cont/peak:
124/131 dB
Dispersion:
80° x 50° rotatable HxV
Input impedance:
22 Kohm
AC Power requirements:
640 VA
Input connector:
XLR with loop, RCA ST
Power cord:
5/16.4 m/ft
Net Dimension (WxHxD):
329x575x325 / 12.95x22.63x12.79 mm/inch
Net Weight:
15.6/34.39 Kg/lb
Transport Dimension (WxHxD):
420x675x400 / 16.53x26.57x15.74 mm/inch
Transport Weight:
18.1/39.90 Kg/lb
2-way powered loudspeaker with a 2” HF and a 10\" LF
Maximum 137dB SPL and 44Hz-20kHz frequency range is ideal for today’s audio engineering demands
High power 2000W Class-D amplifier module
96kHz DSP and FIR filter for true high-resolution sound with super low latency
Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
D-Contour and highly reliable protection circuits
Floor monitoring setting
Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
Optional speaker cover (SPCVR-DZR10)
Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
This highly professional 2-way active system is designed for absolute, long-term reliability. With its multi-functional bass reflex housing and finely tuned, user-friendly presets, the speakers are suitable as full-range, box, satellite and floor monitors. The STINGER® 10 A G3 is powered by a highly efficient Class-D amplifier with a powerful 300-watt continuous output. The specially developed 10" woofer and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion. LD Systems’ proprietary DynX® DSP technology means that the STINGER® 10 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The STINGER® 10 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
Active 10" 2-way bass-reflex PA speaker
127 dB max. SPL and 300-watt RMS performance with a highly-efficient digital amplifier
Perfect all-rounder for full-range, satellite and monitor applications
Practical presets for fast and user-specific frequency tuning
Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
10" custom woofer and BMS tweeter driver
Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
2 line/mic input channels with individual gain controllers plus mono mix output
12 mm birch plywood housing with ultra-robust polyurea coating and M10 rigging points
Shock-resistant front grille for optimal protection of the speaker.
36 mm dual tilt stand attachment with 0° and 5° tilt angle
Extensive and smart accessories for installation and transport
General
Product type
PA loudspeaker
Type
active
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
System Power (RMS)
300 W
Peak power
600 W
Frequency response
65 - 20000
Max. SPL (Peak)
127 dB
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Input sensitivity
-9 dBu
Controls
2 x gain, 2 x Mic/Line
Indicators
Limit, Mic, Mode, On, Protect (protection circuit engaged), Signal
Line inputs
2
Line input connectors
6.3 mm jack, XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), Switching power supply
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.