Content | The Artex harness AX60 S ( Article 1062) in accordance with EN 361 / EN 358 has length adjustable shoulder , leg straps and is equipped with a back header plate m . Anchorage in the shoulder area , 2 catch loops in the chest area and a wide, padded backrest equipped . The safety harness AX 60 S is available in this variant with fall arrest on tether . The Auffangurt AX 60 S is suitable for collecting , abseiling , holding , climbing and rescue .
SK 12-Y Verbindungsmittel mit Bandfalldämpfer
Der Artex Auffanggurt AX60 S (Artikel 1062) nach EN 361 / EN 358 hat längeneinstellbare Schulter-, Beingurte und ist mit einer Rückenverteilerplatte m. Auffangöse im Schulterbereich, 2 Auffangschlaufen im Brustbereich und einer breiten, gepolsterten Rückenstütze ausgestattet. Den Auffanggurt AX 60 S gibt es in dieser Variante mit Steigschutzöse am Haltegurt. Der Auffangurt AX 60 S eignet sich zum Auffangen, Abseilen, Halten, Steigen und Retten.
Artikeldetails
Rückenverteilerplatte m. Auffangöse im Schulterbereich
Gurtverschluss im Brustbereich
vordere Auffangschlaufen i. Brustbereich
Schulter- und Beingurte längeneinstellbar
Durchsteckverschluss (Schnellverschluss) an den Beingurten u. Haltegurt
Haltegurt / Leibgurt m. seitl. Halteösen
breite, gepolsterte Rückenstütze
Steigschutzöse am Haltegurt
Sitzgurt
Gewicht: 1,6kg
Farbe: orange / blau |
FULL-BRIDGE PWM MOTOR DRIVER
The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.
The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation.
A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.
An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A.
Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN
STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole
Key Features - Able to drive both windings of bipolar stepper motor
- Output current up to 750 mA each winding
- Wide voltage range: 10 V to 46 V
- Half-step, full-step and microstepping mode
- Built-in protection diodes
- Internal PWM current control
- Low output saturation voltage
- Designed for unstabilized motor supply voltage
- Internal thermal shutdown
|
The Atomic 3000 DMX is a powerful and rugged, 3000 W high-impact strobe. * 3000 W long-life Xenon lamp included * 5600 K color temperature * Continuous blinder effect with auto fade * Quiet temperature-controlled fan cooling * Smart integrated heat control eliminates cool down time * Atomic Detonator remote control, socket kit for lamp change * Auto-ranging power supply (100-240 V, 50/60 Hz) * DMX, stand-alone, master/slave or Detonator remote control * Preprogrammed special effects
Specifications
Physical
- Length: 425 mm (16.7 in.) without bracket
- Width: 245 mm (9.6 in.) without bracket
- Height: 240 mm (9.4 in.) without bracket
- Weight: 7.5 kg (16.5 lbs.) without bracket
Dynamic
- Effects Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply)
- Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)
- Strobe intensity: Blackout - maximum
- Blinder effect: Continuous with auto fade
- Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
Control and Programming
- Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1
- Stand-alone control: Via N.O. or N.C. SPST switch
- Stand-alone options: Selectable flash rate or blinder effect
- Setting and addressing: DIP switch
- DMX channels: 1, 3, and 4 channel modes
- DMX compliance: USITT DMX512/1990
Lamp
- Approved lamps: MAX-15 Xenon (200-240 V power), MAX-7 Xenon (100-120 V power)
Construction
- Finish: Electrostatic powder-coated
Installation
- Minimum clearance around fan and air vents: 0.1 m (0.4 ft.)
- Mounting points: Five 12 mm (0.5 in.) holes in mounting bracket
- Minimum distance to combustible materials: 0.5 m (1.7 ft.)
- Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
Connections
- Power connection: 1.5 m (4.9 ft.) cable tail, 14 AWG
- DMX data in/out: 3-pin and 5-pin XLR sockets
Electrical
- AC power (MAX-7 model): 100-120 V nominal, 50/60
- Hz AC power (MAX-15 model): 200-240 V nominal, 50/60
- Hz Power supply unit: Auto-ranging electronic switch-mode
- Typical current consumption (MAX-15, high power mode): 8 A
- Peak current consumption: 33 A
- Main fuse (all AC power voltages): 20 AT (slow blow), 250 V
- AC mains power cable: 14 AWG or 2.5mm2
Thermal
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
- Maximum lamp socket temperature: 120° C (248° F)
Included
- Items MAX-15 Xenon lamp (installed, EU model): P/N 97010307
- MAX-7 Xenon lamp (installed, US model): P/N 97010308
- User manual: P/N 35000094
|
Music Blacklight
1 tube
The Music Blacklight gives an extra dimension to the standard blacklights. This Music Blacklight can be music-controlled and therefore you can create your own Blacklight-show, which dances to the music. The Music Blacklight is available in 2 versions: with one tube and with two tubes. Through a switch on the backside, two working modes can be selected: Music Function and Static. Blacklight-bulb included.
Technical Info
Power Supply: 240V/50 Hz
Power Consumption: 40W
Weight: 4,3 kg
Dimensions: 480 x 170 x 145 mm
Lamp included!
Lamp replaceable: ordercode 82487
| T6 Flashlight CREE LED LS-8668
X-BALOG LED Flashlight is equipped with high tech CREE T6. This very strong source of light can just blind the person momentarily. It's life span is approximately up to 100 000 hours.
The body is made of aircraft aluminium alloy, the strongest on the market. It's covered with non slip surface.
TECHNICAL SPECIFICATIONS:
Range : up to 500 meters
Modes : 5 modes - 100% / 70% / 30% /
Stroboscope / SOS (soft touch on button)
Diode type : CREE T6
Body : Aircraft Aluminium Alloy
Weight : 150g
Power supply : 2 x Rechargeable Battery 18650, 3.7v
Dimensions:
Length 200mm
Diameter 24mm
Len diameter 35mm
The set contains:
1 x BL-8668 Flashlight
2 x Rechargeable Battery 18650, 3.7v
1 x Charger
1 x Vehicle Charger Adaptor
1 x Signal / Warning add on |
For powering up to 8 Atomic Colours in a daisy chain configuration.
Code: MA91611085
Manufacturer: Martin
Unit Weight: 1.6Kg
Unit Volume: 0.0048m³ |
Reviews
There are no reviews yet.