| Content | WASH: 7pcs. x10W RGBW 4-in-1 LEDs
This new compact LED MOVING HEAD 7x10W RGBW, mini moving head uses a powerful 7 LED. It has a 25° beam angle and features and it has power consumption 80W. It can be operated by 9 or 14 Channel DMX or one of the stage friendly internal programs on either auto or sound to light mode. It can be free standing or mounted to trussing using the supplied brackets. It is ideal for uses such as small stages, bars,nightclubs, mobile DJs and bands.
-------- TECHNICAL DATA --------
|
|
| Power consumption |
80W |
| Power supply voltage |
90 - 230V |
| Voltage frequency |
50/60Hz |
| Diode type |
4in1 |
| Number of diodes |
7 |
| Diode power |
10W |
| Display |
LED - 4 characters |
| -------- UTILITY DATA -------- |
|
| Color |
RGBW |
| ZOOM |
No |
| Beam angle (min) |
25° |
| Beam angle (max) |
25° |
| Dimming |
Linear: 0 - 100% |
| Flash frequency (min) |
0Hz |
| Flash frequency (max) |
10Hz |
| FROST filter |
No |
| FOCUS |
No |
| PAN range |
540° |
| TILT range |
270° |
| Number of DMX channels |
9 / 14 |
| DMX standard |
DMX 512 |
| Control interface |
4 buttons |
| Operating modes |
DMX, Master/Slave, Sound controlled |
| -------- INTERFACES -------- |
|
| AC IN |
IEC - C14 |
| DMX IN |
XLR - 3 pin |
| DMX OUT |
XLR - 3 pin |
| ----- PHYSICAL CHARACTERISTICS ----- |
|
| IP Rating |
IP20 |
| Housing made |
ABS |
| Cooling |
Active |
| Weight with packaging [kg] |
3,6 |
RGBW COLOUR MIXING
Beam Angle: 15o ZOOM
Strobe: 1-20fps
Dimmer: DMX controlled Dimmer 0-100%
Movement: 540o PAN - 270o TILT
LED Display for MENU settings
Input signal: DMX 512/12 Channels
Automatic on board programms
Voltage: 115-240V AC
Colour: Black
Dimensions: 180x170x260mm
Weight: 3.8kg |
Black 1,28-2,08m/
30kg
Technical Info
Weight: 8,58 kg
Max. Load: 30 kg
Diameter: 35 mm
Length; max. 2,08 m
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Supercardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
80 Hz |
Performance
| Frequency Range |
70 Hz to 20 kHz |
| Maximum SPL |
147 dB SPL |
| Impedance |
600 Ohms |
| Load Impedance |
2000 Ohms |
| Sensitivity |
2.6 mV/Pa |
| Signal-to-Noise Ratio |
76 dB A-Weighted |
| Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
| Weight |
11.29 oz / 320 g |
|
Introducing the new Korg nanoSERIES. These USB-powered, slim-line controllers are designed to make the most of your valuable studio space, and are small enough to take with you on any musical journey. Place one in front of your laptop, rest one on your workstation, park one on a recording console - or anywhere else you need versatile control over your DAW, virtual instrument, effect or DJ software. Small in size, all three controllers go HUGE when it comes to functionality, yet their intuitive layouts provide extremely easy operation for any user.
So c'mon; meet the nanos! The nanoKEY features a great-feeling 25-key velocity-sensitive keyboard that's ideal for song production. Each key can also be set to send MIDI control data, further expanding its power. Next up is the nanoPAD, featuring 12 highly responsive trigger pads, each capable of sending up to eight notes - or eight MIDI control messages - simultaneously, in addition to an X-Y touchpad with roll and flam functions for realistic drum programming. Last but not least, nanoKONTROL offers nine faders, nine knobs, 18 switches, plus a full transport section for expansive control; even a flexible note input mode to help you lay down your next big groove!
nanoPAD SPECIFICATIONS
Controllers
12 trigger pads with velocity and 4 velocity curves
X-Y pad
ROLL button
FLAM button
HOLD button
SCENE buttons (SCENE 1-4)
Memory
4 user scene memories
Connections
mini-USB
Power
USB bus power
Power Consumption
USB bus power: less than 100 mA
Others
Dimensions: 320(W) x 82(D) x 16.5(H) mm/ 12.60“(W) x 3.23“(D) x 00.65“(H)
Weight: 330g/ 0.73lbs.
Accessories: USB cable
| Installer version of the Mobile 8, for wall or ceiling mount. Rec. amp power (non clipping): up to 300W RMS / 8ohms (electronically high pass filtered 24dB/oct at 200 Hz or higher) Peak SPL: 120dB Impedance: 6 ohms Dimensions: 49,2 x 59,2 x 5,5 cm; frame 1,5 cm thick
4 exciter engine. Frame can be painted in accordance with the interior. Panel is available in several colours or in an easy-to-paint-yourself version. Ceiling Version | In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
- Ultra-wide frequency response
- High-definition bass and super-transient highs
- Highly-efficient cobalt capsule
- Outstanding dynamic range
- Single-sided coiled cord with oxygen-free copper wires
- Optimised oval-shaped ear cups
- 1/8'' connector plus 1/4'' adapter included
- Ultra-rugged headband construction
- Designed and engineered in Germany
Headphone
| Driver Size |
1.6" / 40 mm |
| Driver Type |
Dynamic |
| Magnet Type |
Cobalt |
| Design |
Over-Ear (Circumaural) |
| Earcup Style |
Closed-Back |
General
| Frequency Response |
20 Hz to 20 kHz |
| Sensitivity |
113.5 dB at 1 kHz |
| Impedance |
32 Ohms |
| Maximum Power Handling |
100 mW |
Connectivity
| Audio Connector to Source |
1/8" / 3.5 mm |
| Adapter (Included) |
1/4“ |
Cable
| Cable Length |
3.3 to 8.2\' / 1 to 2.5 m (Coiled) |
|
Reviews
There are no reviews yet.