| Content | 1500 Watt DMX LED, UP Fog Machine LED 12 x 3W, 2 in 1 RGB.
Product ID: 127-UPLED
DMX 1500 watt UP Fogger with 12 x 3 watt, 3 in 1 RGB LED\'s and wireless remote. Light up the burst of fog in brilliant colors to get that added effect for your show.
- 7 DMX channels.
- Tank capacity: 2.3 liters.
- 5-6 minute heat up time.
- Unit size: 20" x 20" x 10" (50.8 cm x 50.8 cm x 25.4cm).
- Weight: 18 Lbs(8.2Kg).
|
Power: AC 240V, 50 Hz
Output: 18.000 cu. ft/min (509 m³/min)
Tank Capacity: 2,5 L
Fluid type: Fog Fluid
Fluid Consumption Rate: 44 Min/L(100% Output)
DMX: Yes
Heater: 1200W
Weight: 10,9 kg
Dimensions (LxWxH): 458 x 243 x 177 mm
Accessories/ordering info:
Remote: Z-8 (included)
Cable Length: 10M
Connector DMX: 3 Pin XLR in-out
Connector remote: 6,3 mm Stereo Jack
Functions: timer with interval, duration
and volume;
Continuous fogging; manual on/off
Compatible With: Z-1200II, ICE-101, LCU-1
Optional:
Z-9 Wireless Remote: Ordercode: 60698 |
MDG MAX 5000 HO APS Smoke Machine 2815W
Extremely powerful,adjustable fog output
Virtually noiseless, with the finest fog and the longest hanging times
Automatic Purging System (APS) to prevent build-up and clogging
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included
Powerful fog output (up to 85 m3/3,000 ft3 per minute)
Portability option
TECHNICAL DATA
MAX 5000APSH.O.
Maximum fog output 445 m3 (3,000 ft3)
per minute
Fluid consumption 4.5 L (34 oz)
per hour at 2.76 bar (40 psi)
Gas type N2 only
Gas consumption 5 kg (11 lb)
per hour at 2.76 bar (40 psi)
Reservoir capacity 6.5 L (0.66 US gallon)
Automatic Purging Standard feature
System (APS)
Fog colour Pure white
Particle size 0.5-0.7 microns
Warm-up time (maximum) 8 minutes
Fluid type MDG Neutral Fluid
(M.S.D.S. available on request)
Operating voltage 115 or 230 VAC,
50/60 Hz
Power consumption 2815 W
Dimensions Length 68.5 cm (24?)
Width 28 cm (7?)
Height 30 cm (12?)
Weight 33 kg (43 lb)
Shipping weight 44 kg (97 lb)
(with flight case)
Approval CE approved, CSA
and UL pending |
MDG Ice Fog Compack Low Fog Machine IF-CH 1450W
Extremely quiet, adjustable low fog output
Self-contained unit on wheels for easy transport
Compartments for accessories
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included
Convenient compact size
Extremely low fluid consumption (0.035 L/1.05 oz per minute at full output)
Low pressure/high pressure versions available
TECHNICAL DATA
ICE FOG Compack
Fluid consumption 0.035 L (1.05 oz)
(per minute at full output)
Liquid CO2 type Low pressure version:
Refrigerated
High pressure version:
Non-refrigerated
Liquid CO2 consumption Low pressure version:
(per minute) 1.5 L (3.4 lb) at 1500 kPa (225 psi)
High pressure version:
1.35 kg (3 lb) at 6000 kPa (875 psi)
Reservoir capacity 2.5 L (0.66 US gallon)
Fog colour Pure white
Particle size 0.5-4.5 microns
CO2 running time Low pressure version:
180 L (48 US gallon)
canister (DEWAR) = 120 minutes
High pressure version:
23 kg (50 lb)
canister=17 minutes
Warm-up time (maximum) 8 minutes
Fluid type MDG Low Fog Fluid
(M.S.D.S. available on request)
Operating voltage 115 or 230 VAC, 50/60 Hz
Power consumption 1,450 W
Dimensions Total length 1.15 m (45 1/8?)
Operating length 1.08 m (42 3/8?)
Width 63.5 cm (25?)
Height 82.5 cm (32 1/2?)
Weight 91 kg (200 lb)
Approval CE approved, CSA
and UL pending
Included Remote control ? 8 m (26 ft) 5-pin XLR
extension cable ? 2.5 m (8 ft) long x
13 cm (5 in) diameter fog output conduit
? 3 m (10 ft) insulated low-pressure
liquid CO2 input hose with gauge. |
Martin JEM CLUB SMOKE Machine - Remote Control
| Digital technology and a new Design
The viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power.
Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.
Features:
- Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room. The fan can be adjusted separately from 0 - 99% .
- DMX 512 as standard
The Viper 2.6 can be controlled via DMX 512. Pump and fan can here be controlled separately. Thus, the connected fan can be used as wind machine as well. The connection is done with 5pin-XLR-plugs, two following addresses will be taken. The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged. The machine can also be controlled with analog (0 - 10V) via a lighting desk or a XLR-remote (option). The adjustment of the fan is done directly at the machine, the pump can be adjusted via the analog control. The connection is done with 3-pin-XLR-plug. A Stand-Alone-Mode is possible as well. The adjustments of the pump and the fan are done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted levels.
With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
The control panel with LED display and simple symbols allow an easy operation. It also protects the control buttons against dirt.
- Robust flightcase version
The flightcase on wheels protect the inbuild machine and fan and ensures an easy transport and flexible handling. Handles at both sides of the case allow an easy lifting. Removable lids enable direct access to control panels and fluid tank.
Liquid
The following Look fog liquids are available for the Viper 2.6/Viper deLuxe: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid)
Safety
The viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke
complete with a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper 2.6:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Technical Data
Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230 V / 50 Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output
at continuous output: 240 ml/min.
70 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 15 m
Fogging time at
external Fan: max. 800 Watt
Air quantity adjustable in 99 steps
Control: DMX 512
0 - 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 520 x 230 x 250 mm
Weight without bottle: approx. 12 kg |
Reviews
There are no reviews yet.