Content | Product Description :
- Voltage: 110V/220V, 50/60Hz,
- Power consumption: 30-80W,
- Light: 1W LED 12 RED + 12 GREEN + 12 BLUE,
- Light Color : Red, Green, Blue,
- Lamp life: 50,000h,
- Dmx channel: 7 ch,
- Crotocol: DMX-512,
- Function: Auto run,Sound control, Dmx 512 control
- Working temperature: -25℃~ +35℃
FEATURES :
- Built-in automated programs via master/slave,
- Built-in sound activated programs via master/slave,
- Ultra bright and ultra large 1W LEDs,
- Perfect for Mobile, Club, Stage and Architectural applications,
- Easy to setup and use,
- Super heavy duty can.
Dmx512 channel function :
channel |
value |
function |
1 |
0~255 |
adjust the illumination |
2 |
0~255 |
adjust the illumination of red light |
3 |
0~255 |
adjust the illumination of green light |
4 |
0~255 |
adjust the illumination of blue light |
5 |
0~255 |
blink?speed control |
 
6 |
 
0~255 |
10-73choose color as red-green-blue-red green-red blue-greenblue-redgreenblue
74-164 blink as red-green-blue-red green-redblue-greenblue-redgreenblue
165-255 alternately gradient |
7 |
0~255 |
adjust speed of jumping and gradient from slow to quick |
- Built-in programs Single color, multicolor, rainbow, variable strob,
- 1W Par 36 LED can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 7 DMX channels,
- 1W Par 36 LED is a DMX-512 controllable, full RGB color mix par can made up of highly efficient and double-sized bright LEDs,
- All red, green and blue LEDs can be controlled separately allowing the creation of an unlimited range of colors.
Product Specification :
Item description: led, light (1 W * 36),
Operation mode: Automatic, Acoustic, DMX 512, Master-Slave synchronization, etc,
Standard DMX controller to control 512, eight channels, can independently adjustable light red, green, and blue,
Using a 36 (red, green, and blue 12 12 12), each 1 w high power LEDs, high brightness and low power consumption, bright color, can produce a yellow, blue, purple, white and more than 1600, ten thousand different colors,
15, 25, 38 degrees with advanced optical lens.Small degree high brightness, big degree mixed color evenly,
With large size fan, low noise, good heat dissipation effect,
Rated voltage: AC100V - 240v, 50/60 Hz,
Rated power: 1 x 36 w,
Total power: 30-80 w,
Number of lights: 36 x 1 led (R12 a G12 B12),
DMX access way: 8 DMX channels,
Control mode: walk, master-slave, DMX,
Working environment: indoor 20 ℃ and 40 ℃,
Heather: R, G, B mix a variety of colors,
Stroboscopic: stroboscopic speed can be adjusted,
Points: high brightness, long life, safety performance is high,
Size: 200 * 190 * 140 mm, |
Info
Reflection FullSpectrum Reflection is a revolutionary (patents pending) static LED fixture that brings an entirely new concept to this field of lighting: a compact, interchangeable, and modular light source ? just like a lamp in conventional fixtures ? that creates unmatched intensity by directing light from a unique combination of LEDs onto a parabolic reflector. This design also eliminates problems such as RGB dots and multi-coloured shadows which have plagued many other designs, delivering a unique, uniformly-coloured light beam. By moving the light source in relation to the reflector, this beam can also be zoomed smoothly via DMX from 10° to 17° (1/2 peak angle), 16° to 25° (1/10 peak angle).
|
LED lighting effects Butterfly, RGBW, with 2x10W common transmitter (4 in 1) Cree Led's. Unlimited combinations of colors. Features Electronic Dimmer, Strobe, works with DMX 512 (8 or 5 channels) or independently with music or Auto or Master / Slave. Index IP20 sealing interior. Exterior finish black. Power consumption: 30W, power supply: 110V -240V, 50-60Hz. Dimensions: 27x28x20cm. Weight: 3kg. Uses: disco, club, bar and party. |
18 x 8W QUAD Colour LED RGBW PAR Can in black housing
Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.
It is operated using four buttons and an LED display on the back.
The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.
There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.
The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.
- Type: Studio PAR 64
- Colour spectrum: RGBW
- Number of LEDs: 18
- LED type: 8 W QUAD colour
- Refresh rate: 5000 Hz
- Beam angle: 25°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin male
- DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
- DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
- Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED display
- Power supply: 110 V AC - 250 V AC
- Power consumption: 170 W
- Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
- Housing material: metal
- Housing colour: black
Dimensions without mounting bracket
- Width: 230 mm
- Height: 220 mm
- Length: 255 mm
|
Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a polished housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 80 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Fan
- Sturdy aluminium housing with polished or black finish
Specifications - Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Polished
- Dimensions (without mounting brackets): 260 x 280 x 300 mm
|
LED spotlight with 7 x 10W RGBW 4-in-1 LED's - EU+UK power cord. KingPAR 3 - output: 6.500 Lux @ 1m - with 4-channel and 7-channel DMX-512 protocol - dimmer, strobe, auto, auto speed, custom programme, dimmer speed, RGBW colour changing - lens: 25¡ - master/slave function - power consumption: 115W - metal housing - 4-button, 16-section display - passive cooling, no noise - also suitable as a stand-alone spotlight thanks to 2 adjustable mounting brackets - 3pin DMX input & output - IEC power input & output - COMMANDOR 4 Compatible - dim. (LxWxH): 300 x 300 x 380mm - net weight: 3.5kg - for indoor use. |
Reviews
There are no reviews yet.