ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512

95.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 2.4 GHz DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way. No time delay when signal data is transmitting, signal data is real time and reliably. This product adopts a 2.4G ISM frequency section. 2.4G wireless DMX512 […]

 

Read more

ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 2.4 GHz

DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way.
No time delay when signal data is transmitting, signal data is real time and reliably.
This product adopts a 2.4G ISM frequency section.

2.4G wireless DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 3pin male, 3pin female
Communication distance: 400M ( visible distance )
Work frequency section: 2.4G ISM, 126 channels.frequency section
Material: zinc alloy + plastic
Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )

Package list:

2 * DMX Wireless Transmitter/Receiver unit
2 * Power Adapter
1 * Specification ( English )

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512”

Your email address will not be published. Required fields are marked *

Quick Comparison

ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 removeMA Lighting 2port Node onPC SECOND HAND removeCameo DVC CUE USB to DMX Interface "by Daslight" with up to 2048 DMX Channels and Illuminated Control Panel removeEUROLITE DXT-ME PRO DMX MERGER removeBotex DD-6 RDM Rigg 3P RDM-Capable 1-in-6 DMX Splitter removeCAMEO SB 6 DUAL 6-Channel DMX Splitter / Booster (3 Pin and 5 Pin) remove
NameARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 removeMA Lighting 2port Node onPC SECOND HAND removeCameo DVC CUE USB to DMX Interface "by Daslight" with up to 2048 DMX Channels and Illuminated Control Panel removeEUROLITE DXT-ME PRO DMX MERGER removeBotex DD-6 RDM Rigg 3P RDM-Capable 1-in-6 DMX Splitter removeCAMEO SB 6 DUAL 6-Channel DMX Splitter / Booster (3 Pin and 5 Pin) remove
ImageEUROLITE DXT-ME PRO DMX mergerBotex DD-6 RDM Rigg 3P
SKUWRLS5122port NodeCLDVCCUEDMX MERGER 2/1DD6RDMCLSB6D
Rating
Price 95.00 incl. GR VAT 700.00 415.39 incl. GR VAT 170.00 incl. GR VAT 200.00 incl. GR VAT 198.40 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderOnly 1 left in stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 1024 DMX channels in live mode, 512 DMX channels in stand-alone mode
  • Expandable from 2 to 4 DMX512 universes (2048 DMX channels)
  • Intuitive backlit keyboard with 10 buttons for direct access
  • 99 scenes across 5 zones and calendar triggering (only possible with optional ESApro 2 software)
  • USB and Ethernet for programming/control
  • User-friendly, intuitive Cameo DMX software "by Daslight" for Windows and Mac OS X as a free download
  • Smart Upgrade Technology (SUT)

PRO DMX merger to combine 2 DMX signals into 1

  • Pro DMX merger with 2 DMX inputs and 1 DMX output
  • Enables two separate consoles to control one DMX system
  • DMX modes: LTP, HTP, merge or backup
  • Input B can be set to a start address (offset)
  • LED indicator for valid DMX signals
  • Selectable output frequency 22 Hz/44 Hz
  • Built with NEUTRIK connector
  • Made in Germany
  • For application areas such as: Stage
ContentARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 2.4 GHz DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way. No time delay when signal data is transmitting, signal data is real time and reliably. This product adopts a 2.4G ISM frequency section. 2.4G wireless DMX512 R/T Input voltage: 5VDC 500mA MIN Receive Sensitivity: -94dBm Max transmitting power rate: 20dBm DMX connector: 3pin male, 3pin female Communication distance: 400M ( visible distance ) Work frequency section: 2.4G ISM, 126 channels.frequency section Material: zinc alloy + plastic Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc ) Package list: 2 * DMX Wireless Transmitter/Receiver unit 2 * Power Adapter 1 * Specification ( English )The MA 2Port Node onPC allows the conversion of Ethernet data into DMX data and vice versa. In combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX. If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and becomes a powerful show controller for smaller applications. Also handy backup solutions for reduced budgets become possible. The MA 2Port Node onPC have integrated power supplies, but they also can be powered over Ethernet. Furthermore couplers and safety wires can be easily attached. Two green LEDs will indicate if DMX traffic is in progress. Both, DMX LEDs and the display’s backlight, can be switched off remotely. The ‘Finder Functionality’ is a clever way to let the console indicate a selected node by flashing its backlight. In turn, a press of a button on the MA 2Port Node onPC will identify it on the console’s display. All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable configuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2, MA-Net and Art-Net, which can be set remotely. The MA 2Port Nodes are also available as flush-mount versions (for EU and US in-wall boxes). Dimensions 160 x 145 x 50 mm Dimensions (inch) 6.3 x 5.7 x 1.9 inch Net weight 1,1kg Net weight (lbs) 2.3 lbs PRICE WITHOUT  V.A.T. 24%
  • 2 x DMX512 universes in live mode (computer / tablet) and standalone mode
  • Expandable from two to four DMX512 universes (2048 DMX channels)
  • Intuitive illuminated keypad with 10 buttons for direct scene recall
  • 99 Scenes on 5 zones
  • USB and Ethernet for programming / control
  • 16 Dry contact ports via HE20 connectors
  • User-friendly, intuitive Cameo DMX software "by Daslight", free download for Windows and Mac OS X available
  • Advanced triggering options (TCA)
  • Smart upgrade technology (SUT)
  • Live operation: 1024 channels
  • Standalone operation: 1024 channels
  • Software mode: Cameo D 4 / Daslight DVC 4 (fully supported)
  • Operating systems: Android, iOS, Mac OS, Windows
  • Inputs: Ethernet, USB-C
  • Outputs: Ethernet
  • Memory: microSD, SDHC (32 GB max)
  • Power supply: 5 - 5.5 V DC 0.6 A
  • IP protection type: IP20
  • Dimensions (W x H x D): 160 x 90 x 45 mm
  • Weight: 0.3 kg
  • Colour: Grey
Power supply: 100-240 V AC, 50/60 Hz 12 V DC 1 A
Power consumption: 1 W
Power connection: Mains input via 4-pin screw plug connector (M) mounting version power supply cord with AC adapter (provided)
DMX input: 2 x 3-pin XLR (M) mounting version
DMX output: 1 x 3-pin XLR (F) mounting version
Use of brands: Built with NEUTRIK connector
Dimensions: Width: 13 cm Depth: 7 cm Height: 4,1 cm
Weight: 500 g
  • For distribution of RDM and DMX signals on stage
  • Within a rig or for fixed installations
  • Robust metal housing with mounting rail with M10 thread on the top side
  • Compact and lightweight design ideal for mounting on trusses
  • DMX input and Thru: XLR 3-pin
  • 6 DMX outputs: XLR 3-pin
  • Power input: Power Twist
  • Power supply: 100 - 240 V ~ 50 / 60 Hz
  • Power consumption: 5 watts
  • Dimensions: 122 x 126 x 254 mm
  • Weight: 1.6 kg
  • Professional 6-way DMX splitter / booster
  • Chassis 1U 19" rack-mount enclosure
  • 6 electrically isolated XLR (3-pin / 5-pin) outputs
  • DMX status indicator per channel
  • Power status indicator
  • Switchable 120 Ohm terminating resistor for the DMX THRU output jack
  • Front and rear rack-mount angle attachment options
The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis. Product type Other Lighting Accessories
Type DMX splitter / booster
DMX inputs 2 (parallel)
DMX input connectors XLR 3-pin male , XLR 5-pin male
DMX Thru Outputs 2 (parallel)
DMX Thru Output Connectors XLR 3-pin female , XLR 5-pin female
DMX outputs 6
Controls DMX Thru Terminator , Power On/Off
Indicators 6 x Power LED , 6 x Signal LED
Mains connector IEC power connector
Operating voltage transformer
Operating voltage 230 V AC, 50 Hz
Power consumption 15 W
Width 483 mm
Height 44 mm
Depth 160 mm
Weight 2,976 kg
Accessories (included) Power cord
Weight1.00 kg2.00 kg1 kg0.67 kg1.7 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 2.00 kg
Weight 1 kg
Weight 0.67 kg
Weight 1.7 kg
Weight 3.00 kg