Content | ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 2.4 GHz
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way.
No time delay when signal data is transmitting, signal data is real time and reliably.
This product adopts a 2.4G ISM frequency section.
2.4G wireless DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 3pin male, 3pin female
Communication distance: 400M ( visible distance )
Work frequency section: 2.4G ISM, 126 channels.frequency section
Material: zinc alloy + plastic
Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )
Package list:
2 * DMX Wireless Transmitter/Receiver unit
2 * Power Adapter
1 * Specification ( English ) |
- Battery-powered WiFi to W-DMX™ converter
- Allows wireless lighting control via the Cameo iDMX® Controller App
- Receives WiFi signals from all iOS and Android devices
- 2.4 GHz W-DMX™ transmitter with an operating range of up to 300 m
- Can be used purely as a W-DMX™ transmitter via the DMX input
- Allows control of conventional DMX devices using the iDMX® Controller App via the DMX output
- Long-life LG Chem lithium-ion battery for reliable operation
- Battery management system prevents overcharging and deep discharging
- Includes power adapter charger, bag and DMX cable
Wireless lighting control at your fingertips using iOS and Android devices with the iDMX® CORE WiFi and W-DMX™ Box. The battery-powered unit is specially designed to work with Cameo\'s iDMX® Controller App. It features a 2.4 GHz W-DMX™ transmitter with an operating range of up to 300 m. 3 and 5-pin DMX inputs and outputs allow use with DMX light desks as well as wireless control of conventional DMX spots via W-DMX™ (the Wi-Fi connection is only between the mobile device and iDMX CORE). The high-capacity LG Chem lithium-ion battery provides up to eight hours of continuous operation for the iDMX® CORE Box, which can be extended by means of external power banks. An integrated battery management system prevents overcharging and deep discharging to ensure long battery life. A power adapter charger, DMX Y cable and bag are included.
Product type
LED PAR Lighting Accessories
Range of W-DMX™
up to 300 m
Range of WiFi
up to 15 m
Radio frequency
2400 MHz
DMX input
3-pin & 5-pin
Controls
On / Off , reset
Indicators
Status LED
Battery capacity
24 Wh
Charging time
6h
Battery operation time at maximum load
up to 8 hours
Housing material
Aluminium
Cabinet colour
Black
Protection class IP
20
Cooling
Convection
Maximum Ambient Temperature
-10° - 45° °C
Dimensions without mounting bracket
Width
85 mm
Height
25 mm
Length
170.5 mm
Weight
0,939 kg |
Power supply: |
100-240 V AC, 50/60 Hz
12 V DC 1 A |
Power consumption: |
1 W |
Power connection: |
Mains input via 4-pin screw plug connector (M) mounting version power supply cord with AC adapter (provided) |
DMX input: |
2 x 3-pin XLR (M) mounting version |
DMX output: |
1 x 3-pin XLR (F) mounting version |
Use of brands: |
Built with NEUTRIK connector |
Dimensions: |
Width: 13 cm
Depth: 7 cm
Height: 4,1 cm |
Weight: |
500 g |
| The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).
- Type: DMX 512 protocol
- DMX Inputs: 2 (parallel)
- DMX Input Connectors: 3-pin XLR male
- DMX Thru Outputs: 2 (parallel)
- DMX Thru Output Connectors: 3-pin XLR female
- DMX Outputs: 8 (electrically isolated)
- DMX Output Connectors: 3-pin XLR female
- Controls: Power On/Off, DMX Thru Terminator
- Indicators: 8 x Power LED, 8 x Signal LED
- Power Socket: IEC power socket
- Power Supply: transformer
- Operating Voltage: 230 V AC, 50 Hz
- Power Consumption (max.): 15 W
- Dimensions (W x H x D): 483 x 44 x 160 mm
- Accessories included in package: power cord
|
- Compact pro USB DMX interface
- Electronic is extremely compact placed in the XLR plug
- For controlling DMX devices with a computer (software not included)
- Super portable format fits laptop bags
- Integrated CPU for steady DMX output
- Can transmit up to 512 DMX channels
- Control via DMX
- The device can be connected via USB to the PC in connection with f.e. FreeStyler, DMXControl 3, PC_DIMMER, Lightkey (MAC)
- Compatible with Win 7, Win 10, Linux, Mac OS X 10.2.9,
- Made in Germany
- For application areas such as: Clubs/dancing school; Wedding/gala/events; Stage; mobile djs/entertainer; restaurants, bars and hotels
Power supply: |
5 V DC 500 mA |
IP classification: |
IP20 |
Power connection: |
Power supply cord for USB A mains connection (provided) |
DMX channels: |
Output 512 |
DMX output: |
1 x 3-pin XLR (F) |
Control: |
DMX |
USB port: |
USB 2.0, Typ A |
Color: |
Black |
PC connect: |
F.e. FreeStyler, DMXControl 3, PC_DIMMER, Lightkey (MAC) via USB |
Weight: |
70 g |
Operating system: |
Win 7, Win 10, Linux, Mac OS X 10.2.9, |
USB cable |
Dimensions: |
Length: 50 cm |
Adapter |
Dimensions: |
Length: 7 cm
Diameter: Ø 1,8 cm |
| Eurolite DMX Split 6X - 6-way DMX splitter for rackmounting, DMX distributor with one input and six outputs, absolute electric isolation between input and output or between output and output, two types of DMX connectors (3-pin & 5-pin) for each individual channel, every DMX output features an independent driver and data indicator, input and output with a set of respective power supply and 500 mA internal fuse. Power supply: 230V AC~50Hz. Power consumption: 35W. DMX 512-output: 3-pin or 5-pin XLR-connector. Dimensions: 483 x 200 x 50mm (LxWxH). Weight: 3.5kg |
Reviews
There are no reviews yet.