ARTSOUND TS-332/S Table or Wall base for Gooseneck nikel

2.50 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DAP AUDIO TS-332 Table or Wall base for Gooseneck nikel

 

Read more

DAP AUDIO TS-332 Table or Wall base for Gooseneck nikel
Weight 0.07 kg

Reviews

There are no reviews yet.

Be the first to review “ARTSOUND TS-332/S Table or Wall base for Gooseneck nikel”

Your email address will not be published. Required fields are marked *

Quick Comparison

ARTSOUND TS-332/S Table or Wall base for Gooseneck nikel removeAudio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module removeSHURE A98KCS - Universal Horn Clamp for SM98 Microphone removeARTSOUND TS-332/B Table or Wall base for Gooseneck BLACK removeLD SYSTEMS D1015CMB - Base for D1015CM conference microphone removeAKG GN 30E 30cm Gooseneck Module remove
NameARTSOUND TS-332/S Table or Wall base for Gooseneck nikel removeAudio Technica BP896 Subminiature omnidirectional condenser lavalier microphone, includes AT8539 power module removeSHURE A98KCS - Universal Horn Clamp for SM98 Microphone removeARTSOUND TS-332/B Table or Wall base for Gooseneck BLACK removeLD SYSTEMS D1015CMB - Base for D1015CM conference microphone removeAKG GN 30E 30cm Gooseneck Module remove
Image
SKUTS332/SBP896A98KCSTS332/BD1015CMBGN 30E
Rating
Price2.50 incl. GR VAT 399.00 incl. GR VAT 99.84 incl. GR VAT2.50 incl. GR VAT 62.00 incl. GR VAT 242.00 incl. GR VAT
Stock

Available on backorder

In stock

Only 1 left in stock (can be backordered)

Only 3 left in stock (can be backordered)

In stock

Available on backorder

AvailabilityAvailable on backorderIn stockOnly 1 left in stock (can be backordered)Only 3 left in stock (can be backordered)In stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentDAP AUDIO TS-332 Table or Wall base for Gooseneck nikel

With a capsule diameter not much bigger than the head of a pin, Audio-Technicaʼs smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

Offered in wired & wireless models, the BP896 comes generously equipped with an extensive accessory kit—mic holders, windscreens, element covers & more.

  • Inconspicuous, lightweight capsule
  • Extremely intelligible natural audio
  • Handles high sound pressure levels with ease
  • Rugged built for long-lasting performance
  • High-pass UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Requires 11V to 52V DC phantom power
  • Includes generous accessory kit & protective case
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
  • Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
  • Impedance: 250 ohms (wired only)
  • Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
  • Dynamic Range (Typical): 104 dB, 1 kHz at Max SPL (wired only)
  • Signal-to-Noise Ratio: 63 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
  • Switch: Flat, roll-off (wired only)
  • Current Consumption: 0.1 mA typical at 5V (wireless only)
  • Voltage Range: 2.5-11V (wireless only)
  • Weight (Microphone): 0.14 g (0.005 oz)
  • Weight (Power Module): 85 g (3.0 oz) (wired only)
  • Dimensions (Microphone): 10.8 mm (0.43“) long, 2.6 mm (0.10“) diameter
  • Dimensions (Power Module): 97.6 mm (3.84“) long, 18.9 mm (0.74“) diameter (wired only)
  • Output Connector (Power Module): Integral 3-pin XLRM-type
  • Cable: 1.4 m (55“) long (permanently attached to microphone), 1.6 mm (0.06“) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
  • Accessories Furnished: BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying case
    BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
  • Audio-Technica Case Style: M39

Universal Horn Clamp for SM98 Microphone

DAP AUDIO TS-332 Table or Wall base for Gooseneck BLACK

The D1015CMB metal base ensures secure positioning of gooseneck microphones and offers a female 3-pole XLR connector on the top side and a 3-pole XLR male connector on the back.

The AKG GN 30 E 38 cm Gooseneck With Integrated 3 Pin XLR PP adapter. Good modular gooseneck, includes a theft-proof XLR panel mount socket.

The AKG GN 30 E gooseneck microphone with integrated XLR phantom power adapter for temporary installation and PS 3 F-Lock panel mount socket. This gooseneck can often be seen in use on lecterns and desks in houses of worship and conferences. The AKG GN30E is approximately 38 cm (15 in.) long and has an in-line XLR phantom power adapter (DPA) permanently attached to the gooseneck. The DPA adapter has an integrated 200 Hz bass rolloff filter and LED ON/OFF jumper. It is supplied with a useful theft-proof XLR panel mount socket (PS 3 F-Lock). The GN 30 E connects to any standard mixer input with 9 to 52 V power supply. This gooseneck requires an AKG capsule module (not included) e.g an AKG CK 31, CK 32, CK 33, CK 47 or CK 80.

The main features of the AKG GN 30 E include:

  • Rugged construction
  • Highly reliable contacts for capsule modules
  • Integrated LED ring status indicator
  • Integrated, switchable bass cut
  • Integrated XLR connector
  • Bass filter: 250 Hz, -10 dB at 50 Hz
  • Impedance: =2,000 ohms
  • Supply voltage: 9 to 52 V phantom power to DIN/IEC
  • Current consumption:
Weight0.07 kg0.10 kg0.20 kg0.07 kg0.30 kg0.53 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.07 kg
Weight 0.10 kg
Weight 0.20 kg
Weight 0.07 kg
Weight 0.30 kg
Weight 0.53 kg