ARTSOUND TS-332/S Table or Wall base for Gooseneck nikel

The DAM Series GN E gooseneck modules for fixed and mobile installation comes with an integrated XLR phantom power adapter with 250Hz bass rolloff, LED ring and ON/OFF jumper. It connects to any standard mixer input with 9V - 52V power supply. The DAM Series GN E gooseneck modules are available in three different lengths: 15cm (6in), 30cm (12in), 50cm (20in). They work perfectly with the extensive range of mounting accessories available in the AKG catalog. The gooseneck module fits all DAM Series capsules, CK31, CK32, CK33, CK47 and CK80, via highly reliable contacts.

With a capsule diameter not much bigger than the head of a pin, Audio-Technicaʼs smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

Offered in wired & wireless models, the BP896 comes generously equipped with an extensive accessory kit—mic holders, windscreens, element covers & more.

• Inconspicuous, lightweight capsule
• Extremely intelligible natural audio
• Handles high sound pressure levels with ease
• Rugged built for long-lasting performance
• High-pass UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Requires 11V to 52V DC phantom power
• Includes generous accessory kit & protective case

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Omnidirectional
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
• Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
• Impedance: 250 ohms (wired only)
• Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
• Dynamic Range (Typical): 104 dB, 1 kHz at Max SPL (wired only)
• Signal-to-Noise Ratio: 63 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
• Switch: Flat, roll-off (wired only)
• Current Consumption: 0.1 mA typical at 5V (wireless only)
• Voltage Range: 2.5-11V (wireless only)
• Weight (Microphone): 0.14 g (0.005 oz)
• Weight (Power Module): 85 g (3.0 oz) (wired only)
• Dimensions (Microphone): 10.8 mm (0.43“) long, 2.6 mm (0.10“) diameter
• Dimensions (Power Module): 97.6 mm (3.84“) long, 18.9 mm (0.74“) diameter (wired only)
• Output Connector (Power Module): Integral 3-pin XLRM-type
• Cable: 1.4 m (55“) long (permanently attached to microphone), 1.6 mm (0.06“) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
• Accessories Furnished: BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying case
  BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
• Audio-Technica Case Style: M39

Add To Favorites

MX400SMP Microflex Surface Mount Preamp
Shure

Surface mount preamp for use with MX405, MX410, and MX415 Microflex® Modular Gooseneck Microphones. Mounts the microphone to a table or other surface through a drilled 1" hole.

Product Overview:

Logic enabled for LED control
5 pin XLR connector included
Low cut filter
CommShield® Technology