Ferrofluid AudioMag 200-400 for speaker repair Highlights Great for retrofit/replacement or new applications Damps impedance at resonance Reduces distortion Conducts heat away from voice coil Increases power handling capacity Comes complete with cleaning strips and instructions Sized to fit approximate voice coil diameters Usually 100uL General Purpose for 1″ Diameter V.C. 300uL General purpose for […]
Great for retrofit/replacement or new applications
Damps impedance at resonance
Reduces distortion
Conducts heat away from voice coil
Increases power handling capacity
Comes complete with cleaning strips and instructions
Sized to fit approximate voice coil diameters
Usually 100uL General Purpose for 1″ Diameter V.C.
300uL General purpose for 1.5″ Diameter V.C.
650uL General Purpose for 2″ Diameter V.C.
900uL General Purpose for 4″ Diameter V.C.
Ferrofluid improves the performance of high frequency and midrange drivers. It works by damping the impedance at resonance to effectively lower distortion, smooth frequency response, and increase thermal power handling. It should be used to replenish drivers treated previously with ferrofluid. With care, it can also upgrade most drivers that have never contained ferrofluid.
The kits listed are approximate fill quantities relative to approximate voice coil diameters. In general, the air gap should be 75% filled prior to inserting a voice coil diaphragm assembly. The kit contains synthetic ester-based ferrofluids and in most cases should not pose any adhesive incompatibility. It is recommended that this is confirmed by contacting the driver manufacturer prior to usage. Adding ferrofluid to a driver not intended for it will, in most cases, void the original manufacturer\’s warranty.
Included in kit: A ferrofluid packet, absorbent paper strips for removing old ferrofluid, detailed instructions, and material safety data sheet.
Fluid type: Loudspeaker
Fluid No: AMG 200-400
________________________________________________________________________
Saturation Magnetisation……………………………………………….………..200 Gauss (+/-5%)
Magnetic Field Required to Achieve 90% of Saturation Magnetisation……………………………………….………..5.75 kOe
Initial Magnetic Permeability (~30 Oe)………………………………….1.68
Magnetic Permeability at 8000 Oe………………………………………1.02
Viscosity @ 27ºC…………………………………………………………………… 400 cP (+/- 10%)
Pour Point………………………………………………………………… -22ºC
Density @ 25ºC………………………………………………………………………1. 11 g/ml
Thermal Conductivity……………………………………………………..~ 0.15 W m-1 ºK
Evaporation Rate at 175ºC……………………………………………… ~ 8.0×10-8 g cm-2 s-1
Surface Tension at 17ºC………………………………………………… ~ 35 dynes cm-1
Electrical Resistivity at 25ºC……………………………………………. >109 ohm-cm
Weight
0.10 kg
Reviews
There are no reviews yet.
Be the first to review “ARTSOUND AM2004002 FERROFLUID LIQUID FOR SPEAKER REPAIR 2ml” Cancel reply
Ferrofluid AudioMag 200-400 for speaker repair
Highlights
Great for retrofit/replacement or new applications
Damps impedance at resonance
Reduces distortion
Conducts heat away from voice coil
Increases power handling capacity
Comes complete with cleaning strips and instructions
Sized to fit approximate voice coil diameters
Usually 100uL General Purpose for 1" Diameter V.C.
300uL General purpose for 1.5" Diameter V.C.
650uL General Purpose for 2" Diameter V.C.
900uL General Purpose for 4" Diameter V.C.
Ferrofluid improves the performance of high frequency and midrange drivers. It works by damping the impedance at resonance to effectively lower distortion, smooth frequency response, and increase thermal power handling. It should be used to replenish drivers treated previously with ferrofluid. With care, it can also upgrade most drivers that have never contained ferrofluid.
The kits listed are approximate fill quantities relative to approximate voice coil diameters. In general, the air gap should be 75% filled prior to inserting a voice coil diaphragm assembly. The kit contains synthetic ester-based ferrofluids and in most cases should not pose any adhesive incompatibility. It is recommended that this is confirmed by contacting the driver manufacturer prior to usage. Adding ferrofluid to a driver not intended for it will, in most cases, void the original manufacturer\'s warranty.
Included in kit: A ferrofluid packet, absorbent paper strips for removing old ferrofluid, detailed instructions, and material safety data sheet.
Fluid type: Loudspeaker
Fluid No: AMG 200-400
________________________________________________________________________
Saturation Magnetisation.......................................................………..200 Gauss (+/-5%)
Magnetic Field Required to Achieve 90% of Saturation Magnetisation……………………………………….………..5.75 kOe
Initial Magnetic Permeability (~30 Oe)………………………………….1.68
Magnetic Permeability at 8000 Oe………………………………………1.02
Viscosity @ 27ºC.....................................................................……… 400 cP (+/- 10%)
Pour Point………………………………………………………………… -22ºC
Density @ 25ºC........................................................................………1. 11 g/ml
Thermal Conductivity……………………………………………………..~ 0.15 W m-1 ºK
Evaporation Rate at 175ºC……………………………………………… ~ 8.0x10-8 g cm-2 s-1
Surface Tension at 17ºC………………………………………………… ~ 35 dynes cm-1
Electrical Resistivity at 25ºC……………………………………………. >109 ohm-cm
Protection cover bag for TT08 and TT08-A.
Features
Protects the speaker from scratches and hits
Strong nylon construction
Holes that can be opened on the front grille, on handles and on the rear panel for cable connections in order to keep the cover on the speaker when in use
GENERAL SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Height:
mm/inch
Width:
mm/inch
Depth:
mm/inch
Net Weight:
0,545/1,2
Kg/Lbs
SHIPPING INFORMATION
Package height:
70/2.75
mm/inch
Package width:
340/13.38
mm/inch
Package depth:
485/19.09
mm/inch
Package weight:
0,89/1.96
Kg/Lbs
Protection cover bag for TT22 and TT22-A.
Features
Protects the speaker from scratches and hits
Strong nylon construction
Holes that can be opened on the front grille, on handles and on the rear panel for cable connections in order to keep the cover on the speaker when in use
GENERAL SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Height:
mm/inch
Width:
mm/inch
Depth:
mm/inch
Net Weight:
1,095/2.41
Kg/Lbs
SHIPPING INFORMATION
Package height:
95/3.74
mm/inch
Package width:
680/26.77
mm/inch
Package depth:
465/18.3
mm/inch
Package weight:
1,1/2.42
Kg/Lbs
Wall Tilt Bracket Designed To Mount The SR-S4L or SR-S4S Line Array Speakers, Designed for Indoor Use, Easy to Install, Rugged and Durable Exterior, Good Value for Money.
TOA SR-TB4 wall tilt bracket is ideal for indoor use. The SR-TB4 is designed to be used exclusively to mount the SR-S4L or SR-S4S Line Array Speaker on a wall. It allows the speaker orientation angle to be adjusted to 5° max. vertically and 20° max. horizontally.
Features:
Extra-Thick Construction
Strong and durable, this back box is made of 16-gauge metal.
MDF Lining
With 0.5" of medium-density fiberboard lining, this backbox is constructed to eliminate extra resonance and increase bass response.
Specifications:
External Volume: 3 cu ft, nominal
Internal Volume: 2.4 cu ft.
Knockouts: 22.1 mm (0.87 in) diameter opening
Five (5) locations: 1 on top panel & 1 on each side and end panel
Dimensions (Height): 308 mm (12.1 in) above ceiling
324 mm (12.6 in) total height
Width: 587 mm (23.1 in)
Depth: 461 mm (18.2 in) cabinet
505 mm (19.9 in) including side tabs
Ceiling Cut Out: 378 x 378 mm (14.9 x 14.9 in)
Safety Agency Rating: Suitable for use in air handling spaces, per U.L.-2043,U.L.-1480, NFPA90 & NFPA70A
Net Weight: 20.6 kg (45.5 lbs)
Shipping Weight: 23.1 kg (51 lbs)
Included Accessories: 4 pcs M4 x 14 mm machine screws for one system of mounting baffle to backbox.
6 pcs #10 x 0.75 inch metal screws for another system of mounting baffle to backbox.
4 pcs M4 nuts for optional transformer mounting
Features:
Rugged Construction
Built to last, this speaker grille is made of 19-gauge metal and has zinc underplating to prevent rust and scratches.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.