Content |
- ARTSOUND Speaker Diaphragm B33658
-
Replacement for several Speaker brands
-
Voice coil: 34.1mm
-
Ring Diameter: 62,5 mm
- Total diameter : 62,5mm
-
Total Length: 82.5 mm
- The center distance of the two post terminals : 72.5 mm
-
Impedance: 8 ohm, DCR: 6.2 ohm
-
Titanium dome
-
Fits Driver and Cabinet Models: Various
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
B33658 |
VC Diameter |
34.1 mm |
VC Bobbin Material |
KSV |
VC Wire |
CCAR |
Diaphragm Material |
Titanium |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
62.5 mm |
Diaphragm Height |
mm |
Diaphragm Thickness |
0.04 mm |
RDC |
6.2Ω |
Fit Wash Size |
|
Replacement |
|
| | Original JBL D8R2431 Diaphragm to repair the 2431H Driver (339894-002X). 8 ohm
Diaphragm Comes with Ferrofluid and Allen Key.
Here is the list of some cabinet model use:
AE Series: AM6200/64-WH, AM6200/95-WH, AM6212/00-WH, AM6212/64-WH, AM6212/95-WH, AM6215/64-WH, AM6215/95-WH, AM6315/64-WH, AM6315/95-WH, AM6340/64-WH, AM6340/95-WH
Precision Directivity Series: PD5200/43-WH, PD5200/64-WH, PD5200/95-WH, PD5212/43-WH, PD5212/64-WH, PD5212/95-WH, PD5322/43-WH, PD5322/64-WH, PD5322-95-WH, PD743, PD764
SRX Series: SRX712M, SRX715/F, SRX738/F VLA Series: VLA301, VLA301H, VLA601, VLA601H, VLA901, VLA901H
Vertec Series: VT4888, VT4888DP-AN/CN/DA |
- Replacement diaphragm kit for 14XT™driver
for Impulse 100, TLS-2, TLS 2X, TLS-4, TLS-5, TLS 5X, TLM-2, TLM-5,Impulse 100P, Impulse 100 White, PR 10, PR 12, PR 15, SSE-10,SSE-12, SSE-15, SSE-6, SSE-26
-
Peavey 14XT Diaphragm Part # 00442500
-
Voice coil: 1-3/8" (35.5mm)
-
Diameter: 2-3/4" (70mm)
-
Impedance: 8 ohms, Re: 6.8 ohms
-
Titanium dome with edge wound voice coil on Kapton former
-
Fits Peavey Driver and Cabinet Models:
Peavey: 14A, 14-A, 14 A, 14XT, 14-XT, 14 XT, Impulse 100, TLS-2, TLS2, TLS 2X, TLS-4, TLS4, TLS-5, TLS 5X, TLS5X, TLM-2, TLM-5, Impulse 100P, Impulse 100 White, SSE-10, SSE-12, SSE-15, SSE-6, SSE-26, 00442510, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
- JBL Factory Speaker Diaphragm part # D8R2452-SL.
- Specs: Voice coil: 3.93" (100mm), Diameter: 5" (76mm), Impedance: 8 ohm, DCR: 4 ohmFits JBL: 5732-M/HF, HLA4895, VP7210-95DP, VP7212/64DPAN/CN/DA, VP7212/95DPAN/CN/DA, VP7212/95DPC, VP7212-MDP, VP7215/64DPAN/CN/DA, VP7215/95DPAN/CN/DA, VP7215/95DPC, VP7315/64DPAN/CN/DA, and many more!
|
Reviews
There are no reviews yet.