| Content |
- Speaker Diaphragm C41035
-
Replacement for several Speaker brands
-
Voice coil: 1.35" (34.4mm)
-
Ring Diameter: 62.7 mm
- Total diameter : 62.8mm
- The center distance of the two terminals post: 2.89" ( 73.0mm )
-
Length: 82.5 mm
-
Impedance: 8 ohm, DCR: 6.2 ohm
-
Mylar dome
-
Fits Driver and Cabinet Models:Varius
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
| Model Number | C41035 | | VC Diameter | 34.4 mm | | VC Bobbin Material | KSV | | VC Wire | CCAR/ALR/SV | | Diaphragm Material | MYLAR | | Tracery on Diaphragm Edge | | | Diaphragm Out Diameter | 63 mm | | Diaphragm Height | mm | | Diaphragm Thickness | 0.04 mm | | RDC | 6.2Ω | | Fit Wash Size | | | Replacement | |
|
This diaphragm is used in models 2404H, 2404H-1, and 2405. This diaphragm is also the correct replacement for the Peavey HT94!
Specifications:
8 ohm
DCR is 6.1 +or- 8%
Overall diaphragm diameter 2 15/16-in or 75mm
Voice coil diameter 1 3/4-in or 44mm
| MODEL ZG-10CA / DG-10C-A
M-D-10C
26A65D1F
087838253383
TOA 507 07 008 30
TOA Voice for Horn SC-630, SC630M |
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
|
- Replacement diaphragm kit for 14XT™driver
for Impulse 100, TLS-2, TLS 2X, TLS-4, TLS-5, TLS 5X, TLM-2, TLM-5,Impulse 100P, Impulse 100 White, PR 10, PR 12, PR 15, SSE-10,SSE-12, SSE-15, SSE-6, SSE-26
-
Peavey 14XT Diaphragm Part # 00442500
-
Voice coil: 1-3/8" (35.5mm)
-
Diameter: 2-3/4" (70mm)
-
Impedance: 8 ohms, Re: 6.8 ohms
-
Titanium dome with edge wound voice coil on Kapton former
-
Fits Peavey Driver and Cabinet Models:
Peavey: 14A, 14-A, 14 A, 14XT, 14-XT, 14 XT, Impulse 100, TLS-2, TLS2, TLS 2X, TLS-4, TLS4, TLS-5, TLS 5X, TLS5X, TLM-2, TLM-5, Impulse 100P, Impulse 100 White, SSE-10, SSE-12, SSE-15, SSE-6, SSE-26, 00442510, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Reviews
There are no reviews yet.