ARTSOUND GM400 LASERGRIP INFRARED THERMOMETER

16.73 incl. GR VAT

Only 4 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Non-Contact Laser Thermometer LCD Digital IR Infrared Thermometer GM400 Temperature Meter Gun Point -50~400 Degree This infrared thermometer USES non-contact infrared sensing technology, the target of safety, preparation, fast, reliable measurement, is widely used in measuring the mechanical, chemical, ceramics, light industry, food, metallurgy, electric power, high temperature heat treatment and other industries, dangerous and […]

 

Read more

Non-Contact Laser Thermometer LCD Digital IR Infrared Thermometer GM400 Temperature Meter Gun Point -50~400 Degree

This infrared thermometer USES non-contact infrared sensing technology, the target of safety, preparation, fast, reliable measurement, is widely used in measuring the mechanical, chemical, ceramics, light industry, food, metallurgy, electric power, high temperature heat treatment and other industries, dangerous and difficult to close to the surface temperature measurement. Temperature measurement is widely used in the school laboratory and home.

Objects of any temperature greater than absolute zero radiation infrared energy, this energy to around at the speed of light transmission, infrared lens collects and gathers the infrared energy to the sensor, the sensor produces a low output voltage, the voltage is proportional to the temperature of the target object, voltage after processing for the temperature value.

  • Not recommended for human use.

Main features:

1. Temperature range: -50 ℃ ~ 400 ℃ (-58 ℉ ~ 752 ℉)
2. Accuracy: ± 1.5 ° C (± 2.7 ° F) OR ± 1.5% ° C
3. ℃ / ℉ conversion selection function
4. Display resolution: 0.1 ℃ or 0.1 ℉
5. Working environment: 10 ℃ – ~ 40 ℃ (50 ℉ ~ 104 ℉), relative humidity: 10 ~ 90RH no condensation
6. Storage temperature: -10- ~ 40 ℃ (14 ℉ ~ 104 ℉)
7. Detection time: ≤ 0.8second
8. Distance coefficient ratio: 12: 1 (distance and measuring point size ratio)
9. Emissivity: Preset: 0.95
10. Power supply: 2 7 batteries (purchase, replace the battery more convenient)
11. Battery life of about 12 hours
12.LED backlight (easy to use at night)
13. Automatic shutdown function (about 10 seconds)

Model INFRARED THERMOMETER-GM400
Temperature range -50 ℃ ~ 400 ℃ (-58 ℉ ~ 752 ℉)
Accuracy ± 1.5 ° C (± 2.7 ° F) OR ± 1.5% ° C
Display resolution: 0.1 ℃ or 0.1 ℉
Working environment 10 ℃ – ~ 40 ℃ (50 ℉ ~ 104 ℉), relative humidity: 10 ~ 90RH no condensation
Storage temperature -10- ~ 40 ℃ (14 ℉ ~ 104 ℉)
Detection time ≤ 0.8second
Distance coefficient ratio 12: 1 (distance and measuring point size ratio)
Emissivity Preset: 0.95
Power supply 2 7 batteries (purchase, replace the battery more convenient)
Battery life 12 hours
LED LED backlight
Automatic shutdown function about 10 seconds
Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “ARTSOUND GM400 LASERGRIP INFRARED THERMOMETER”

Your email address will not be published. Required fields are marked *

Quick Comparison

ARTSOUND GM400 LASERGRIP INFRARED THERMOMETER removeDBX ADVANCED CABLE TESTER CT-3 removeDBX CABLE TESTER CT-2 removeNT-INSTRUMENTS MINI SPL MEASUREMENT MICROPHONE removeAMERICAN AUDIO DB DISPLAY MKII Decibel Meter removePALMER AUDIO AHMCT8 AUDIO CABLE TESTER remove
NameARTSOUND GM400 LASERGRIP INFRARED THERMOMETER removeDBX ADVANCED CABLE TESTER CT-3 removeDBX CABLE TESTER CT-2 removeNT-INSTRUMENTS MINI SPL MEASUREMENT MICROPHONE removeAMERICAN AUDIO DB DISPLAY MKII Decibel Meter removePALMER AUDIO AHMCT8 AUDIO CABLE TESTER remove
Image
SKUGM400DBX CT-3DBX CT-2MINI SPLE010254AHMCT8
Rating
Price 16.73 incl. GR VAT 211.15 incl. GR VAT 64.43 incl. GR VAT 513.36 incl. GR VAT 85.00 incl. GR VAT 44.42 incl. GR VAT
Stock

Only 4 left in stock

Available on backorder

Available on backorder

Only 5 left in stock

Only 2 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityOnly 4 left in stockAvailable on backorderAvailable on backorderOnly 5 left in stockOnly 2 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentNon-Contact Laser Thermometer LCD Digital IR Infrared Thermometer GM400 Temperature Meter Gun Point -50~400 Degree This infrared thermometer USES non-contact infrared sensing technology, the target of safety, preparation, fast, reliable measurement, is widely used in measuring the mechanical, chemical, ceramics, light industry, food, metallurgy, electric power, high temperature heat treatment and other industries, dangerous and difficult to close to the surface temperature measurement. Temperature measurement is widely used in the school laboratory and home. Objects of any temperature greater than absolute zero radiation infrared energy, this energy to around at the speed of light transmission, infrared lens collects and gathers the infrared energy to the sensor, the sensor produces a low output voltage, the voltage is proportional to the temperature of the target object, voltage after processing for the temperature value.
  • Not recommended for human use.
Main features: 1. Temperature range: -50 ℃ ~ 400 ℃ (-58 ℉ ~ 752 ℉) 2. Accuracy: ± 1.5 ° C (± 2.7 ° F) OR ± 1.5% ° C 3. ℃ / ℉ conversion selection function 4. Display resolution: 0.1 ℃ or 0.1 ℉ 5. Working environment: 10 ℃ - ~ 40 ℃ (50 ℉ ~ 104 ℉), relative humidity: 10 ~ 90RH no condensation 6. Storage temperature: -10- ~ 40 ℃ (14 ℉ ~ 104 ℉) 7. Detection time: ≤ 0.8second 8. Distance coefficient ratio: 12: 1 (distance and measuring point size ratio) 9. Emissivity: Preset: 0.95 10. Power supply: 2 7 batteries (purchase, replace the battery more convenient) 11. Battery life of about 12 hours 12.LED backlight (easy to use at night) 13. Automatic shutdown function (about 10 seconds)
Model INFRARED THERMOMETER-GM400
Temperature range -50 ℃ ~ 400 ℃ (-58 ℉ ~ 752 ℉)
Accuracy ± 1.5 ° C (± 2.7 ° F) OR ± 1.5% ° C
Display resolution: 0.1 ℃ or 0.1 ℉
Working environment 10 ℃ - ~ 40 ℃ (50 ℉ ~ 104 ℉), relative humidity: 10 ~ 90RH no condensation
Storage temperature -10- ~ 40 ℃ (14 ℉ ~ 104 ℉)
Detection time ≤ 0.8second
Distance coefficient ratio 12: 1 (distance and measuring point size ratio)
Emissivity Preset: 0.95
Power supply 2 7 batteries (purchase, replace the battery more convenient)
Battery life 12 hours
LED LED backlight
Automatic shutdown function about 10 seconds

 

The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.

Features
  • Tests up to 8-pin cables
  • 2 piece chassis for testing installed cables
  • Test Tone Generator
  • Allows connection between different format connectors with ease
  • ʽBananaʼ connector continuity tester with beeper and LED indicator
  • Super-rugged construction for durability and longer life
  • (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
  • (2) BNC connectors for testing of 2 pin->to pin connections
  • (2) RCA Phono connectors for testing of 2 pin->to pin connections
  • (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
  • (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
  • (2) Speaker Twist connectors for testing of 4 pin->to pin connections
  • (2) Banana connectors for testing of 1 pin->to pin connections
  • (2) 1/4” (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections
  • (2) RJ45 connectors for testing of 8P8C modular connections
  • (2) 1/8” (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections
  Specifications
Power Requirements (2) 9V batteries, one per side (Batteries not included)
Dimensions 3.5” (8.9cm) (W) x 5.5” (14cm) (L) x 1.5” (3.7cm) (H)
 

 

 

 

This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®. We all know how frustrating and time consuming it can be when your audio cables fail. With the dbx CT2 cable testing unit you can now evaluate a large variety of your cables with ease. The CT2 offers many common connectors such as Speaker Twist, XLR, Phono, BNC, DIN, TRS, TS, DMX, & Banana. The CT2 allows for testing cables even with different connectors at each end. For example, it is simple to test a TRS to XLR cable. With well illuminated LED indicators and a simple rotary dial, users can quickly establish whether a cable is wired and functioning correctly, or if it is dead and in need of repair. Features
  • 6-position rotary selector with individual LEDʼs for up to five pins plus internal battery life check
  • ʽBananaʼ connector continuity tester with beeper and LED indicator
  • Super-rugged construction for durability and longer life
  • (2) Speaker Twist connectors for testing of 4 pin->to pin connections
  • (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
  • (2) RCA Phono connectors for testing of 2 pin->to pin connections
  • (2) BNC connectors for testing of 2 pin->to pin connections
  • (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
  • (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
  • (2) 1/4” TRS connectors for testing of 3 pin->to pin connections
  • (2) Banana connectors for testing of 1 pin->to pin connections
Specifications
Power Requirements 9V battery (Battery not included)
Dimensions 3.5” (8.9cm) (W) x 5.5” (14cm) (L) x 1.5” (3.7cm) (H)

The MiniSPL is the perfect accessory to the Acoustilyzer & Minilyzer for
acoustical measurements.
  The MiniSPL is a battery powered measurement microphone. Together
with the Acoustilyzer or Minilyzer, it forms an acoustical analyzer and integrating
sound level meter. Additionally it may be operated as a stand-alone microphone
e.g. connected to a balanced audio-line, a microphone-input or a sound-card.
  
Product-details
? Battery powered
? Factory-set sensitivity
? No phantom power required
? 1/2" microphone, class 2 acc. IEC 61672
? Omni-directional
? Supplied with mic clamp, wind protection
? Typical frequency response included
MiniSPL together with Acoustilyzer:
? SPL Meter / RTA
? Reverberation Time RT60
? Delay Time
? FFT Analyzer
? Speech Intelligibility STI-PA
MiniSPL together with Minilyzer:
? Measurements: SPL, min./max., Leq
? 1/3rd octave spectrum analyzer

Details The all metal DB DISPLAY MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer. Specifications • Designed to set in an amp rack to view your decibel level • Creates a great light show in your amp rack • Display progresses from green through amber to red • Sensitivity adjustment on both left and right channels • 2 separate modes: dot and bar • Includes 5V power supply • Line Inputs: Left & Right RCA / Left & Right XLR • Line Outputs: Left & Right RCA / Left & Right XLR • Voltage Operation: DC 5V, 500mA Power Supply included • Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm • Weight: 2.5 lbs. / 1.25kg.pdfUser's Manual   A stage is only as good as its cables — and the AHMCT 8 sets the record straight. The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers — both in the workshop and on stage. The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands. The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations.
  • Solid metal housing
  • Powered by a 9-V block battery
  • Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
  • Additional continuity tester with measuring probes
  • Optical display and buzzer
Product type Test Equipment
Connectors 6.3 mm Jack , Banana plug , DIN 5-pin , RCA , Speakon, 4-pin , XLR
Controls down , Power On/Off , up , volume
Indicators battery status , LED chain
Operating voltage 9 V block
Acoustic continuity test yes
Test cable yes
Cabinet material sheet steel
Cabinet surface powder coated
Width 105 mm
Depth 145 mm
Weight 0,64 kg
Weight0.20 kg1.00 kg1.00 kg0.10 kg1.50 kg0.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 1.00 kg
Weight 1.00 kg
Weight 0.10 kg
Weight 1.50 kg
Weight 0.60 kg