ARTSOUND GM400 LASERGRIP INFRARED THERMOMETER

16.73 incl. GR VAT

Only 4 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Non-Contact Laser Thermometer LCD Digital IR Infrared Thermometer GM400 Temperature Meter Gun Point -50~400 Degree This infrared thermometer USES non-contact infrared sensing technology, the target of safety, preparation, fast, reliable measurement, is widely used in measuring the mechanical, chemical, ceramics, light industry, food, metallurgy, electric power, high temperature heat treatment and other industries, dangerous and […]

 

Read more

Non-Contact Laser Thermometer LCD Digital IR Infrared Thermometer GM400 Temperature Meter Gun Point -50~400 Degree

This infrared thermometer USES non-contact infrared sensing technology, the target of safety, preparation, fast, reliable measurement, is widely used in measuring the mechanical, chemical, ceramics, light industry, food, metallurgy, electric power, high temperature heat treatment and other industries, dangerous and difficult to close to the surface temperature measurement. Temperature measurement is widely used in the school laboratory and home.

Objects of any temperature greater than absolute zero radiation infrared energy, this energy to around at the speed of light transmission, infrared lens collects and gathers the infrared energy to the sensor, the sensor produces a low output voltage, the voltage is proportional to the temperature of the target object, voltage after processing for the temperature value.

  • Not recommended for human use.

Main features:

1. Temperature range: -50 ℃ ~ 400 ℃ (-58 ℉ ~ 752 ℉)
2. Accuracy: ± 1.5 ° C (± 2.7 ° F) OR ± 1.5% ° C
3. ℃ / ℉ conversion selection function
4. Display resolution: 0.1 ℃ or 0.1 ℉
5. Working environment: 10 ℃ – ~ 40 ℃ (50 ℉ ~ 104 ℉), relative humidity: 10 ~ 90RH no condensation
6. Storage temperature: -10- ~ 40 ℃ (14 ℉ ~ 104 ℉)
7. Detection time: ≤ 0.8second
8. Distance coefficient ratio: 12: 1 (distance and measuring point size ratio)
9. Emissivity: Preset: 0.95
10. Power supply: 2 7 batteries (purchase, replace the battery more convenient)
11. Battery life of about 12 hours
12.LED backlight (easy to use at night)
13. Automatic shutdown function (about 10 seconds)

Model INFRARED THERMOMETER-GM400
Temperature range -50 ℃ ~ 400 ℃ (-58 ℉ ~ 752 ℉)
Accuracy ± 1.5 ° C (± 2.7 ° F) OR ± 1.5% ° C
Display resolution: 0.1 ℃ or 0.1 ℉
Working environment 10 ℃ – ~ 40 ℃ (50 ℉ ~ 104 ℉), relative humidity: 10 ~ 90RH no condensation
Storage temperature -10- ~ 40 ℃ (14 ℉ ~ 104 ℉)
Detection time ≤ 0.8second
Distance coefficient ratio 12: 1 (distance and measuring point size ratio)
Emissivity Preset: 0.95
Power supply 2 7 batteries (purchase, replace the battery more convenient)
Battery life 12 hours
LED LED backlight
Automatic shutdown function about 10 seconds
Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “ARTSOUND GM400 LASERGRIP INFRARED THERMOMETER”

Your email address will not be published. Required fields are marked *

Quick Comparison

ARTSOUND GM400 LASERGRIP INFRARED THERMOMETER removeBEHRINGER CT-100 CABLE TESTER removePALMER AUDIO AHMCTDMX Pro 3-pin and 5-pin DMX and XLR cable tester removeARTLIGHT TE808 LASERGRIP THERMOMETER PORTABLE BODY & OBJECT THERMOMETER removeNT-INSTRUMENTS ACOUSTILYZER COMPACT ACOUSTICAL ANALYZER removeTOA ZM-104 Impedance Meter remove
NameARTSOUND GM400 LASERGRIP INFRARED THERMOMETER removeBEHRINGER CT-100 CABLE TESTER removePALMER AUDIO AHMCTDMX Pro 3-pin and 5-pin DMX and XLR cable tester removeARTLIGHT TE808 LASERGRIP THERMOMETER PORTABLE BODY & OBJECT THERMOMETER removeNT-INSTRUMENTS ACOUSTILYZER COMPACT ACOUSTICAL ANALYZER removeTOA ZM-104 Impedance Meter remove
Image
SKUGM400E005950AHMCTDMXTE808ACOUSTILYZERZM-104
Rating
Price 16.73 incl. GR VAT 32.00 incl. GR VAT 29.08 incl. GR VAT 14.25 incl. GR VAT 1,473.00 incl. GR VAT 363.00 incl. GR VAT
Stock

Only 4 left in stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Only 5 left in stock

Available on backorder

AvailabilityOnly 4 left in stockAvailable on backorderOnly 1 left in stock (can be backordered)In stockOnly 5 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentNon-Contact Laser Thermometer LCD Digital IR Infrared Thermometer GM400 Temperature Meter Gun Point -50~400 Degree This infrared thermometer USES non-contact infrared sensing technology, the target of safety, preparation, fast, reliable measurement, is widely used in measuring the mechanical, chemical, ceramics, light industry, food, metallurgy, electric power, high temperature heat treatment and other industries, dangerous and difficult to close to the surface temperature measurement. Temperature measurement is widely used in the school laboratory and home. Objects of any temperature greater than absolute zero radiation infrared energy, this energy to around at the speed of light transmission, infrared lens collects and gathers the infrared energy to the sensor, the sensor produces a low output voltage, the voltage is proportional to the temperature of the target object, voltage after processing for the temperature value.
  • Not recommended for human use.
Main features: 1. Temperature range: -50 ℃ ~ 400 ℃ (-58 ℉ ~ 752 ℉) 2. Accuracy: ± 1.5 ° C (± 2.7 ° F) OR ± 1.5% ° C 3. ℃ / ℉ conversion selection function 4. Display resolution: 0.1 ℃ or 0.1 ℉ 5. Working environment: 10 ℃ - ~ 40 ℃ (50 ℉ ~ 104 ℉), relative humidity: 10 ~ 90RH no condensation 6. Storage temperature: -10- ~ 40 ℃ (14 ℉ ~ 104 ℉) 7. Detection time: ≤ 0.8second 8. Distance coefficient ratio: 12: 1 (distance and measuring point size ratio) 9. Emissivity: Preset: 0.95 10. Power supply: 2 7 batteries (purchase, replace the battery more convenient) 11. Battery life of about 12 hours 12.LED backlight (easy to use at night) 13. Automatic shutdown function (about 10 seconds)
Model INFRARED THERMOMETER-GM400
Temperature range -50 ℃ ~ 400 ℃ (-58 ℉ ~ 752 ℉)
Accuracy ± 1.5 ° C (± 2.7 ° F) OR ± 1.5% ° C
Display resolution: 0.1 ℃ or 0.1 ℉
Working environment 10 ℃ - ~ 40 ℃ (50 ℉ ~ 104 ℉), relative humidity: 10 ~ 90RH no condensation
Storage temperature -10- ~ 40 ℃ (14 ℉ ~ 104 ℉)
Detection time ≤ 0.8second
Distance coefficient ratio 12: 1 (distance and measuring point size ratio)
Emissivity Preset: 0.95
Power supply 2 7 batteries (purchase, replace the battery more convenient)
Battery life 12 hours
LED LED backlight
Automatic shutdown function about 10 seconds
Tests XLR, 1/4 in., 1/8 in., TT, RCA and MIDI connectors. The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LEDs indicate proper shield connection and phantom power presence. The CT100 also offers an installed cable test mode and a continuity check plus a test tone generator. Features 3 modes: cable test mode, installed cable test mode, and test tone mode Accepts XLR, mono and stereo TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI Connectors Continuity check Intermittent detect Phantom power detect Grounded shield detect Test tone generation (1 kHz and 440 Hz) Battery operation (requires 2 AA alkaline batteries)

Palmer Pro MCT DMX 3-pin and 5-pin DMX and XLR cable tester MCT DMX This cable tester checks 3-pin and 5-pin DMX cables for continuity in fully automatic or manual pin selection modes. Pin connection status of the male and female cable ends is indicated by two rows of bright LEDs. In addition, the unitʼs 3-pin connectors can also be used to test XLR microphone cables. The DMX Cable Tester comes with two L-brackets for variable mounting options.

 

  • Tests 3-pin and 5-pin DMX cables for continuity
  • Also tests 3-pin XLR microphone cables
  • Automatic test mode or manual pin 1 - 5 selection
  • LED indicators
  • Mounting brackets included

 

Product type Test Equipment
Connectors XLR (3-pin) , XLR (5-pin)
Controls Auto Scan , On / Off , Scan switch
Indicators LED chain
Operating voltage 2 x AA battery
Acoustic continuity test no
Test cable no
Cabinet material sheet steel
Cabinet surface powder coated
Width 240.2 mm
Height 48 mm
Depth 53 mm
Weight 0,7 kg

 

Infrared thermometer introduction: ①fever reminder, guard your baby\'s health ②Infrared temperature measurement technology Avoid contact with baby skin and spread bacteria ③Large back lit display (multi-parameter display) ④50 groups of memory functions °C/°F switching function / low battery reminder function ⑤2 temperature measurement mode Object temperature, body temperature measurement mode switch, 3-color back light display different temperature display different colors. ⑥Measurement result reminder: At the end of the measurement, the speaker will make a sound, prompting to complete the measurement. ⑦Precision temperature probe German precision probes ensure accurate temperature measurement ⑧Low power consumption, energy saving and envirronmental protection Powerred by 2 AAA batteries, no measurement 30 S automatic shutdown.

Display: LCD Digital

Way of working: Infrared

Alarm function: Three-color alarm

Operating mode: Human body and objects

shape: Handheld Gun shape

Battery voltage: DC 3 V (2 AAA alkaline batteries)

Measuring range: 34.0 ℃ ~ 43.0 ℃

Measurement accuracy: 42.0 ℃: ± 0.3 ℃ 35.0 ° C to 42.0 ° C: ± 0.2 ° C

Measuring distance: 5 ~ 15 cm

Measurement interval: about 6 seconds

Three-color back light Surface temperature mode:

Below 37.5 ℃ is green

37.6 ° C to 38.0 ° C is yellow

38.1 ℃ above is red

Automatic shutdown: ≦ 20 seconds

Storage: -20 ℃ ~ 45 ℃, relative humidity: ≦ 85%

ACOUSTILYZER
 
The Acoustilyzer AL1 functionality complements and expands the ML1
Minilyzer with a new and comprehensive set of acoustical measurement
functions.
The optimized combination of electrical and acoustical features creates
the perfect all in one tool for sound/systems contractors, installers and
multi-media specialists. The Acoustilyzer AL1 is available as a palm-sized
portable acoustical analyzer or as firmware for Minilyzer owners with optional
available STI-PA measurement functionality.
Required Accessories:
The AL1 requires a measurement microphone for acquiring acoustical signals.
NTI offers the following microphones:
- MiniSPL, class 2 acc. IEC 61672
- M2010, class 1 frequency response (ext. phantom power supply required)

Product Details  
Sound Pressure Level: Leq, short-time Leq , LE, Lmin, Lmax,
Real Time Analyzer: 1/1 or 1/3 octave band resolution SPL/LEQ display per
band, max - min display
Zoom FFT: Actual level and Leq, full band up to 0.7Hz resolution
Reverberation Time: RT60 with 1/1 octave band resolution, confidence indicator,
according to ISO3382
Delay Time: Propagation delay between electrical and acoustical signal (built in mic),
resolution: 0.1ms
STI-PA (optional): Single value STI or CIS test result, modulation indices display,
individual band level results, error indicator, amplitude weighting acc. IEC 60268-16
release 2003
Electrical: Level RMS, THD+N, Polarity
Measurement microphone: Required for acquiring acoustical signals, NTI offers MiniSPL
or M2010 measurement microphones

  • Measures impedance of speaker lines up to 100k ohms
  • Batteries: four (AA)
  • Zero adjustment for accuracy on all ranges
  • Easy to read meter calibrates directly in ohms
  • Includes carrying case, test leads and impedance to power reference chart
  • Five year warranty
Weight0.20 kg1.00 kg0.80 kg0.20 kg0.30 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 1.00 kg
Weight 0.80 kg
Weight 0.20 kg
Weight 0.30 kg
Weight 2.00 kg