Content | ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE
This Adapter Cable supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors. The gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan.
HDMI Male to VGA Female Video Converter Adapter Cable for PC Laptop HDTV Projectors and other HDMI Input Devices:
- Supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors
- Gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan
- With this version, we added a standby function to lower the energy consumption
- On the past design of HDMI to VGA converters, if HDMI port was connected to the device, VGA port will keep working, now, we added an environmental friendly standby function to make sure when there are no signal outputs from VGA, convertor will be at a low energy consumption, in the meanwhile to produce less heats
- Lower energy consumption, heat-reduced, extends the life of the product; after receiving customer’s feedback that the product will get overheated, we improved the operating current of the product to lower from 220mA to 120mA
- More stable performance and not easy to skip the screen, we improved the design of chips, mainboard and circuit to make it more stable when transmitting signal
|
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
|
The Extremo DAC can be connected via S/PDIF
or AES/EBU to any existing digital source like
CD-player, DAT, CD-transport.
A I2S digital input allows a direct link with
M192 CD-transport for the best audio performance.
CS8416 - a very low jitter 192kHz digital receiver from
Cirrus Logic.
AD1896 - an high dynamic 192/24 upsampler from
Analog
Devices 2 x PCM1792 - 140 dB, 192/24 DAC from Texas
| The DacMagic Plus has fantastic new features including wireless device connectivity and stunning audio performance from music of all formats. Thanks to twin DACs it instantly improves audio fidelity from all your favourite digital products allowing you to make your computer, TV, Blu-ray player and other devices a true part of your hi-fi system.
PURE PROCESS
The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing their built-in digital to analogue converters.
This signal is then carefully analysed and upgraded using our ATF2 upsampling system. Once this process is complete, the DacMagic Plus outputs your music as a much purer analogue signal straight to your amplifier.
Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection.
Watch the video opposite to find out why our proprietary ATF2 upsampling technology makes such a difference to the sound produced by our DACs.
Features
Twin Wolfson WM8740 24-bit DACs used in dual differential configuration
New Anagram Technologies ATF2, 24-bit/384kHz audio upsampling/jitter reduction technology
Optional digital preamp mode allowing connection directly to power amp or active speakers
24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes
Selectable digital filters - linear phase, minimum phase and steep
Supports high quality aptX Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Digital to analogue converters Dual Wolfson WM8740 24-bit DACs
Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz
Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced
Frequency response 20Hz to 20kHz (±0.1dB)*
THD @ 1Khz 0dBFs |
Transit Pro is a super-high resolution USB/DSD (Direct Stream Digital) converter that takes audio signal from your computer and delivers the highest quality digital (optical)/analog signal to any audio component. The key to Transit Proʼs outstanding audio performance is its 32bit/384kHz digital "engine,” which delivers a super-wide bandwidth frequency response, ultra-wide dynamic range and an extremely low noise floor. There are eight user-selectable sampling rates between 44.1 and 384kHz so you can achieve the exact performance level needed for any given circumstance.
Transit Pro has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. Transit Pro is USB-bus-powered or you can use an optional AC wall adapter (not included). Transit Pro is the answer when you need to deliver a reference-quality digital signal from your computer to an external audio component.
Features - Super-high resolution USB to optical/DSD converter
- Eight user-selectable sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
- Signal-to-noise ratio: 112dB
- Extremely low distortion: THD+N 0.003%
- Digital (optical) and analog outputs
- Direct Stream Digital rates: DSD64, DSD128
- Dual headphone outputs: ¼-inch, 1/8-inch
- Compatible with headphones from 16–600 ohms
- USB-bus-powered or optional AC adapter
Requirements - Minimum System Requirements:
- M-Audio Windows Driver
- Windows 7
- OSx 10.9
|
ARTSOUND VD-238 VGA Video and RCA Audio Converter TO HDMI
This compact VGA with Audio to HDMI Converter enables you to convert a VGA video signal and separate RCA audio signal to an HDMI output, and in this way connect your VGA/RCA sources to an HDMI display for a full audiovisual experience.
On output, the converter supports resolutions up to Full HD 1080p and computer resolutions up to 1600 x 1200. It converts the input resolution to the closest output resolution.
Key Features
- Convert VGA and L/R RCA signals to an HDMI output
- VGA and L/R RCA inputs
- HDMI output
- Embeds L/R RCA audio into the HDMI output
- Supports output resolutions up to 1080p and 1600 x 1200
- Supports data rates up to 6.75 Gbps
Input |
1 x VGA 1 x L/R RCA |
Output |
1 x HDMI 1.2a |
Input Video Signal |
0.5 - 1.0 V p-p |
Input DDC Signal |
5 V p-p (TTL) |
Supported Input Resolutions |
640 x 480 at 60 / 75 Hz 800 x 600 60 / 75 Hz 1024 x 768 60 / 75 Hz 1280 x 720 60 / 75 Hz 1280 x 768 60 / 75 Hz 1280 x 960 60 / 75 Hz 1280 x 1024 60 / 75 Hz |
Supported Output Resolutions |
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Computer Resolutions: up to 1600 x 1200 (if available on the HDMI display)
*The input resolution is automatically converted to the closest output resolution. |
Frequency |
Up to 165 MHz |
Video Amplifier Bandwidth |
1.65 Gbps |
Power Supply |
5 VDC, 1 A |
Power Consumption |
5 W |
Operating Temperature |
32 to 158°F (0 to 70°C) |
Storage Temperature |
14 to 176°F (-10 to 80°C) |
Operating Humidity |
10 to 85% RH (no condensation) |
Storage Humidity |
5 to 95% RH (no condensation) |
Dimensions |
3.5 x 1 x 2.7" (8.9 x 2.5 x 6.9 cm) |
Weight |
0.24 lb (109 g) |
|
Reviews
There are no reviews yet.