| Content | ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE
This Adapter Cable supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors. The gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan.
HDMI Male to VGA Female Video Converter Adapter Cable for PC Laptop HDTV Projectors and other HDMI Input Devices:
- Supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors
- Gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan
- With this version, we added a standby function to lower the energy consumption
- On the past design of HDMI to VGA converters, if HDMI port was connected to the device, VGA port will keep working, now, we added an environmental friendly standby function to make sure when there are no signal outputs from VGA, convertor will be at a low energy consumption, in the meanwhile to produce less heats
- Lower energy consumption, heat-reduced, extends the life of the product; after receiving customer’s feedback that the product will get overheated, we improved the operating current of the product to lower from 220mA to 120mA
- More stable performance and not easy to skip the screen, we improved the design of chips, mainboard and circuit to make it more stable when transmitting signal
|
The Extremo DAC can be connected via S/PDIF
or AES/EBU to any existing digital source like
CD-player, DAT, CD-transport.
A I2S digital input allows a direct link with
M192 CD-transport for the best audio performance.
CS8416 - a very low jitter 192kHz digital receiver from
Cirrus Logic.
AD1896 - an high dynamic 192/24 upsampler from
Analog
Devices 2 x PCM1792 - 140 dB, 192/24 DAC from Texas
| High Grade DAC - Digital / Optical to Analogue Stereo Audio Converter - SPDIF - TOSlink / Coaxial to Stereo Left / Right RCA
This analog digital audio converter is designed for home and professional audio conversion. Converts Toslink coaxial or optical digital audio signals into analog L / R audio signals for connection to an external device such as an amplifier via standard RCA connectors. The main features that allow us to be used even in professional contexts are:
- Supports sampling rate at 32.44.1.48 and 96 KHz.
- 24-bit S / PDIF incoming bit stream on the left and right channels.
- Converts coaxial or Toslink digital audio signals into analog L / R audio.
- Provides transmission of signals free of electromagnetic disturbances.
- Easy to install and easy to use.
Content of the package
- Main unit (analog digital audio converter)
- 5V / DC power supply.
- User Manual
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
| Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
| Gain, MM / MC |
40 dB / 60 dB |
| Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
| Max. output |
9,5 V (1 kHz) |
| Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
| THD MM / MC |
<0,01% / <0,05% |
| RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
| A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
| Sampling rates |
32, 44,1 and 48 kHz |
| USB output |
5 pin Mini b Buchse |
| USB signal |
digital serial data protocol USB 1.1 |
| Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
| Input / Line output |
1 pair RCA/Cinch sockets each |
| Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
| Power consumption |
100 mA DC |
| Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
| Weight |
250g without power supply |
|
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
| Analog to Digital Optical Toslink Audio RCA Converter/Adapter, With power adapter
The ARTSOUND new * Analog to Digital Audio Adapter/Converter * converts analog Left/Right RCA-style audio connections to digital S/PDIF coax or TOSLink outputs.The unit is compact, easy to install, and operates in a wide variety of operating conditions.
How it works:
Simply plug in your analog audio source into the RCA jacks, then connect your digital receiving device ...
So you’ve got your entire audio system running Digital (Coax or Toslink) audio, but you’ve got one old piece of equipment with analog output that is gumming up the works? No problem! Just get the Analog to Digital Audio Converter and bring your old equipment into the digital age!
This compact little converter has a set of right/left RCA analog audio input jacks. It will simultaneously convert the analog audio into Coax and Optical (Toslink) Digital signals. You can connect either or both outputs to an appropriate digital audio input on a TV, AV receiver, or anything else.
The converter has a digital sampling rate of 48 kHz and produces an LPCM stereo audio output signal. It is powered by a 5V DC power adapter, which is included. All the connectors are gold-plated.
Note that this converter only works one way – Analog to Digital. It will NOT convert digital signals to analog! |
Reviews
There are no reviews yet.