| Content | Glass Shelf Finish
Module Combination
Extra Module
Description
Here you can build your own 4 shelved Equinox Hifi RS Celebration rack combination (an extra module can be added using the drop down option box if requred which will take you to the maximum of 5 levels). All choices include a serial numbered two shelf base module. Just chose your frame and glass colour, the height combination of your two additional shelf modules, whether you require standard 6mm glass or the NEW award winning Piano Black ARC glass and if you wish to add another shelf module.
PLEASE NOTE-The Price shown is for a 2 shelf Base unit and two additional single shelf modules with internal heights of either 145mm or 195mm.This will give you a total of 4 levels of storage. Please note that the price shown assumes standard 6mm glass has been specified. p>
With each of the 500 limited edition two shelf base modules being hand made on new specially commissioned blueprinted assembly frame, every RS Celebration is personally inspected by one of our senior artisans and serial numbered to prove authenticity.
As well as our standard frame colours, Equinox RS Celebration can be ordered with the special Gloss Black or Cesium paint finish at no extra cost. Piano Black, Arctic Frost or as a cost upgrade ARC Piano Black glass can then be specified.
The technical upgrades over the standard Equinox RS Hi-fi are as follows:
•New aerospace grade aluminium top and bottom isolation caps.
•incorporating neoprene A.S.I.S.T. gasket technology to improve dampening.
•Redesigned top and base leg cap interface which dramatically reduces surface area contact between each module by over 90%, thus substantially increasing the isolation of each module.
•Top and bottom caps are now fastened together (as opposed to press fitted) which aids the rigidity of each unit, helps transfer high frequency resonances away from supported equipment and raises the weight capacity for each shelf from 22kg to 27.5kg.
•Each leg is filled with HDN Phenylethene to reduce ringing.
For maximum sound deadening properties, ARC Glass can now be specified. Atacama Resonance Control glass has been developed for Equinox Hifi RS and Equinox Celebration RS models and is now available as an upgrade. This specially made laminated glass has a dampening core and is over 50% thicker than standard Equinox glass to further improve the performance of the Equinox Hifi range of equipment supports.
Equinox Hi Fi RS Celebration is made in the UK. | Features
- Sturdy construction for use with extremely heavy studio monitors
- Adjustable spikes to compensate for uneven floors
Specifications
- Material: steel
- Color: black
- Height: 105 cm
- Maximum load capacity: 60 kg
- Pole diameter: 100 mm * (2.0 mm material thickness)
- Support plate: 500 x 350 mm (6.0 mm material thickness)
- Base plate: 600 x 450 mm (6.0 mm material thickness)
- Weight: 29 kg?
Scope of delivery
Applications
- Speaker stand in recording or project studio
- Speaker stand in band rehearsal room
- Speaker stand for installation and in conference rooms
|
HiFi Furniture Discrete Inert Range Design Copyright © to Custom Design (Newcastle) 2012
Custom Design\'s philosophy is to achieve business by product design and service success. Responsible social and environmentally friendly practices are an integral philosophy where ever we may retail our products in the world. Innovation is an integral part of Custom Design. Innovation is part of our company\'s culture and one of the main reasons for our continued success over the past 28 years.
The Discrete Inert HiFi Support Range are unique to Custom Design, manufactured from exclusive, hand made and hand finished 5mm Acoustic Aluminium shelves Part of our philosophy to question and challenge all ideas. The Acoustic Aluminium and Acoustic Steel are the pioneering, engineering approach that Custom Design has taken to absorbing unwanted resonance, maximising isolation through resonance noise vibration absorption and sound performance, a serious improvement to the usual option of hifi support stand design.
The system works on the principle of constrained layer dampening, which is two sheets of the same material, found to be the most efficient, bonded together with the patented polymer.
The polymers viscoelastic properties converts kinetic energy to heat, by preventing excessive resonance from effecting the performance of your equipment, enhancing the sound performance by providing clarity, separation and adding an inky blackness to your base.
The 4 corner, light weight satellite supports are available in Chrome, Brushed Chrome, Black, Mercury or White finish, and combine with the 5mm Inert Aluminium shelves to provide a light weight, acoustically inert hifi table support. The acoustic improvements are substantial compared with traditional manufacturing methods and materials. The manufacturing process includes laser precision cut, hand made and hand finished acoustic aluminium shelves, acoustically enhanced with the patented viscoeleastic polymer which converts resonance noise vibration to negligible heat, changing the energy form.
Designed to have the minimal visual impact, with one of the smallest footprints required for supporting hifi equipment, the Discrete Inert HiFi Furniture Support Range provide a unique, acoustically inert platform for our customers who demand a more exciting and dynamic performance from their hifi furniture support table.
Custom sizes available on request.
Inert Aluminium Shelves - 525mm wide x 400mm depth x 6mm
Satellite Support Spacing 175mm
Satellite Support Finishes available - Chrome - Brushed Chrome - Black - Mercury - White
M6 Base isolation spikes zinc plated supplied standard
Image above: Discrete Inert HiFi 4 - Black with Black satellite supports. | Features
- Sturdy construction for use with extremely heavy studio monitors
- Adjustable spikes to compensate for uneven floors
Specifications
- Material: steel
- Color: black
- Height: 90 cm
- Maximum load capacity: 60 kg
- Pole diameter: 100 mm * (2.0 mm material thickness)
- Support plate: 500 x 350 mm (6.0 mm material thickness)
- Base plate: 600 x 450 mm (6.0 mm material thickness)
- Weight: 27 kg?
Scope of delivery
Applications
- Speaker stand in recording or project studio
- Speaker stand in band rehearsal room
- Speaker stand for installation and in conference rooms
| Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: M
- Dimensions: 250 x 320 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
| Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: S
- Dimensions: 176 x 200 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
|
Reviews
There are no reviews yet.