ATEL D46 LED Dimmer 6 Channel O LIGHTING

205.00 incl. GR VAT

Only 3 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
6-channel dimmer for LED calibrate minimum power 1w Single phase Dimmer DMX – 512 High quality 6 channels 400watt each, special for LED sources adjustable from 3 watts. On the front panel it has 6 protection fuses of 2 A for each channel. On the back of the Dimmer, the connection is made with detachable […]

 

Read more

6-channel dimmer for LED calibrate minimum power 1w

Single phase Dimmer DMX – 512 High quality 6 channels 400watt each, special for LED sources adjustable from 3 watts. On the front panel it has 6 protection fuses of 2 A for each channel. On the back of the Dimmer, the connection is made with detachable terminals. You have the option of manual check to adjust your lighting percentage.

D46 DMX INSTRUCTIONS FOR USE

 

The dimmer is connected to a single-phase supply with a Shuko socket.

The dimmer works digitally and has 6 channels. The DMX connection is made on the front panel with a male XLR 3 PINS input (1 pins earth – 2 pins ( – ) and 3 pins (+ ), DMX continuity is made with XLR female with the same connections and you can connect DMX to terminals that are on the back of the dimmer.

The red led shows the voltage supply, the green led shows the DMX communication (DATA).

The display shows the number of DMX channels (001-512) channels. The up / down buttons raise or lower the number of channels (eg 001, 002, 003, …).

The ( + /- ) manual check buttons are used to check the channels

The connection of the loads to the output is done with screw terminals. The indications are L (phase), N (neutral) and G (ground) and the power of each channel is 400 Watts.

After connecting the dimmer, open the ON-OFF switch. The red led lights up and the display shows an error (i.e. there is no communication). To start communication with the dimmer, connect the DMX in input plug to the console.. The display shows 001 and the DATA led lights up. Depending on what channel the display is showing, that channel of the console starts the dimmer.

If the dimmer shows 001 it means that the dimmer is connected to the console from channel 1-6. If it shows 002 it is connected to channels 2-7. If it shows 003 it is connected to channels 3-8 and so on.

If you want to connect more dimmers from the DMX OUT plug, connect your next dimmer or to the In-Out terminals on the back..

If any LED does not light up, it means that there is an error in the connection. If you want to check the dimmer channels (manual check), press the buttons (+ / –) for 3 seconds together. Then the display shows . By pressing the up button, you continuously raise the lighting percentage of the channel. Control the other channels in the same way by pressing the (+ / – ) buttons.

If you want to control all channels together in master position then the display should show the number .

To restore the dimmer to its original state after the manual check, press the (+ / – ) buttons at the same time. Minimum control load 3 watts.

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “ATEL D46 LED Dimmer 6 Channel O LIGHTING”

Your email address will not be published. Required fields are marked *

Quick Comparison

ATEL D46 LED Dimmer 6 Channel O LIGHTING removeLITEPUTER DX-626 6 CHANNELS DIMMER 20A removeZero88 Betapack3 H-W + DMX removeSHOWTEC 50901 DDP-616 6 Channel Digital Dimming Pack 16A/Ch removeWORK WD 1215 DMX 12 CHANNELS DIGITAL DIMMER removeEUROLITE DPX-610 Digital Dimmer 2U, 6 channel remove
NameATEL D46 LED Dimmer 6 Channel O LIGHTING removeLITEPUTER DX-626 6 CHANNELS DIMMER 20A removeZero88 Betapack3 H-W + DMX removeSHOWTEC 50901 DDP-616 6 Channel Digital Dimming Pack 16A/Ch removeWORK WD 1215 DMX 12 CHANNELS DIGITAL DIMMER removeEUROLITE DPX-610 Digital Dimmer 2U, 6 channel remove
Image50915 showtec dimmer 6channel ddp-616 16a
SKUD46 OLIGHT630001BETAPACK3HW50901WD 1215 DMXDPX-610
Rating
Price 205.00 incl. GR VAT 640.00 incl. GR VAT 1,013.08 incl. GR VAT 580.00 incl. GR VAT 1,380.74 incl. GR VAT 553.80 incl. GR VAT
Stock

Only 3 left in stock (can be backordered)

In stock

Available on backorder

Only 1 left in stock

In stock

Available on backorder

AvailabilityOnly 3 left in stock (can be backordered)In stockAvailable on backorderOnly 1 left in stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description• Redesigned and improved 6-channel dimmer • Ideal dimmer for touring and fixed installation • Clear LCD display for all menu settings • Strong 19" housing • Variable Fan speed cooling system
Content6-channel dimmer for LED calibrate minimum power 1w Single phase Dimmer DMX – 512 High quality 6 channels 400watt each, special for LED sources adjustable from 3 watts. On the front panel it has 6 protection fuses of 2 A for each channel. On the back of the Dimmer, the connection is made with detachable terminals. You have the option of manual check to adjust your lighting percentage. D46 DMX INSTRUCTIONS FOR USE   The dimmer is connected to a single-phase supply with a Shuko socket. The dimmer works digitally and has 6 channels. The DMX connection is made on the front panel with a male XLR 3 PINS input (1 pins earth – 2 pins ( – ) and 3 pins (+ ), DMX continuity is made with XLR female with the same connections and you can connect DMX to terminals that are on the back of the dimmer. The red led shows the voltage supply, the green led shows the DMX communication (DATA). The display shows the number of DMX channels (001-512) channels. The up / down buttons raise or lower the number of channels (eg 001, 002, 003, ...). The ( + /- ) manual check buttons are used to check the channels The connection of the loads to the output is done with screw terminals. The indications are L (phase), N (neutral) and G (ground) and the power of each channel is 400 Watts. After connecting the dimmer, open the ON-OFF switch. The red led lights up and the display shows an error (i.e. there is no communication). To start communication with the dimmer, connect the DMX in input plug to the console.. The display shows 001 and the DATA led lights up. Depending on what channel the display is showing, that channel of the console starts the dimmer. If the dimmer shows 001 it means that the dimmer is connected to the console from channel 1-6. If it shows 002 it is connected to channels 2-7. If it shows 003 it is connected to channels 3-8 and so on. If you want to connect more dimmers from the DMX OUT plug, connect your next dimmer or to the In-Out terminals on the back.. If any LED does not light up, it means that there is an error in the connection. If you want to check the dimmer channels (manual check), press the buttons (+ / –) for 3 seconds together. Then the display shows . By pressing the up button, you continuously raise the lighting percentage of the channel. Control the other channels in the same way by pressing the (+ / – ) buttons. If you want to control all channels together in master position then the display should show the number . To restore the dimmer to its original state after the manual check, press the (+ / – ) buttons at the same time. Minimum control load 3 watts.

DX-626 is a sophisticated DMX 6 Channel dimming pack. Its C3 liner dimming curve
ensures the accuracy of dimming effects on each fader scale. Each channel provides
20A output and is equipped with a 25A high-speed magnetic breaker. DX-626 has a
thermo-controlled fan which will activates automatically when the temperature is over
35°C (95°F). It can keep the system?s temperature in a safe range and reduce dust
accumulation. The 6 dimming sliders on the control panel are convenient for testing.
In addition to DMX input, it also has analog 0 ? 10 V DC input.

Features:
6 channels, each 20A.
C3 liner dimming curve.
Automatically detect power frequency (50Hz/60Hz) in different area and stabilizes the
dimming output.
The thermo-controlled fan will be activated automatically when the temperature is over 35°C
(95°F), stop the output when over 75°C° (167°F) and restart output when below 65°C (149°F). 
Self-testing function to test without a console. 
Each channel has individual 0-6% preheat setting for protecting loads. 
Each channel can be set as dimming or non-dimming.

 
Power supply 100?120V AC, 200?240V AC  50/60 Hz, 3?4w (1?3w optional)
Output       Maximal 20A per channel, total 20A.
DMX signal input/ output DMX512 
DMX signal connector  XLR-5pin, XLR-3pin, 6p4c phone jack connector 
Analog signal input  0 --- 10V DC 6 Channels ( 9 pin D-type, female )
Analog signal power input   DC 0-10V 
Analog signal connector   D-Type Plug 9Pin(F) 
Analog input channel   9 channels
Preheat setings 0 --- 6%
Dimension 19? 2U, 482(W) x 88(H) x 313(D) mm
Weight         8  Kg
 

Zero88 Betapack3 H-W + DMX

Excellent value 6 channel dimmers for multipurpose use

The Betapack 3 range of digitally controlled dimmer packs offer one of the most cost effective and versatile solutions to dimming currently available.

Manufactured to the highest professional standards, this comprehensive range of 6 x 10 Amp packs includes variants with sockets to match most global standards.

The Betapack 3 range is available with MCB?s per channel giving you peace of mind and maximum protection.

The versatility of the Betapack 3 means it can be 19" rack or wall mounted using the brackets supplied or made portable by adding the optional "Easicarry" kit consisting of a handle and four feet. Its legendary reliability and durability make it the dimmer of choice for a huge variety of venues worldwide.

Features
  • MCB protection as standard
  • Isolated DMX input
  • Patchable per channel
  • Preheat, Topset and Dimmer Law selectable per channel
  • 12 programmable backup memories
  • 3 programmable 99-step sequences with adjustable times
  • Auto DMX termination when loop-through plug is removed
  • Auto frequency tracking
  • Lock and Reset functions
  • Temperature monitoring and progressive overheat shutdown
  • Convection cooled
  • DMX Status indication
  • 19" Rack and Wall mounting brackets included
  • Easy to service- common service operations need only a screwdriver

DDP-616 6 Channel Digital Dimming Pack • Redesigned and improved 6 channel dimmer • Ideal dimmer for touring and fixed installation • Clear LCD display for all menu settings • Strong 19 inch housing Power supply: AC 220 V - 50/60 Hz, single phase connection Power supply: AC 380 V – 50/60 Hz, 3-phase connection Output power: Max. 10 Amp each channel, Total 60A Output connector: Schuko Circuit breaker: 16 A Control signal: DMX-512, Analogue 0-10 V Protection: Short circuit, temperature, overload Dimensions: 483x380x90 mm (LxWxH) (Rubber feet removed) Dimensions: 483x385x94 mm (LxWxH) (incl. rubber feet) Weight: 12 kg

WD 1215 DMX
 
12 channels digital module dimmer. This dimmer has incorporated a 32 bit high power
microcomputer with aa time processing unit. Each channel can be programmed with the
adress, a control curve, the limitation, the preheat of the lamps and the loadcheck. 12
internal memories. Can be linked with oyher dimmers. Protections: Short circuit, power
failure memory. Alarm of over voltage. Temperature with switch off. Electronic fuse and
loadcheck. 10A per channel. 3 phase connection.
Dimensions: 483x178x436 mm. Weight: 31 Kgs.

2U digital Dimmer, 6 channels with 10A current each, LCD display, single or full adjusting lamp pre-heat, Softpatch, manual channel operation, Curve: Linear, Square, Switch, DMX 512 in/out 3-pin XLR or analogue 0-10V, 1-phase or 3-phase 380-230V AC, 50Hz, 10Α automatic circuit breaker per channel. Dimensions: 410x482x95mm. Weight: 8kg. (70064122). Applications: live / disco / bar / restaurant / theaters. 6x10A dimmer for DMX & analog signals, connection via terminal blocks
  • Universal dimmer pack for professional use
  • Can be operated 1-phase or 3-phase
  • 6 x 10 A
  • DMX control or analog control possible
  • The DMX-starting address can be adjusted on the device
  • Synchronization of several devices possible via DMX
  • Adjusting the lamp pre-heat
  • All modes are displayed via LEDs and the display
  • With automatic circuit breaker per channel
  • Channel-outputs on the rearpanel via pole connectors
  • Only for professional use
  • Preprogrammed 12 chasers
  • Can be operated in 6 CH mode
  • Controlling by Analog 0-10 V; stand-alone; DMX
  • (19") 48.3 cm rack installation 2 U
Power supply: 230/380 V AC, 50 Hz
Output power: Max. 13800 W Max. 2300 W per channal
Output current: Max. 60 A
Power connection: Mains input via screw terminal
Power output: Screw terminal
Power output fuse per channel: C 10 A Fuse resettable
Programs: Preprogrammed 12 Chasers
DMX channels: 6
DMX input: 3-pin XLR (M) mounting version
DMX output: 3-pin XLR (F) mounting version
Control: Analog 0-10 V; stand-alone; DMX
Control channels: 6
Color: Black
Housing design: (19") 48.3 cm rack installation 2 U
Dimensions: Width: 48,3 cm Depth: 41 cm Height: 8,9 cm
Weight2.00 kg5.00 kg8.00 kg13.00 kg31.00 kg6.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 5.00 kg
Weight 8.00 kg
Weight 13.00 kg
Weight 31.00 kg
Weight 6.00 kg