| Content | Proffesional wind up stand made of strenghtened steel loads up to 60kg. Installed ratchet lock protects fixed equipment against uncontrolled falling down and damage. Itʼs an ideal solution for mobile DJ and musicians.
Material: steel
Load capacity: 60 kg
Maximum height: 2,70 m
Base spread diameter: 1,54 m
Height: 1,60 m
Pipe diameter: 35 mm
Weight: 12 kg | - Adjustable height: 1450-3500mm
- Load capacity: 50kg | Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) |
- Sturdy carrier bag made of 1680D ballistic nylon for the square base plate (563 x 563 mm).
- For GLS331B and GLS431B base plates
- 5 mm tough padding
- See-through window for labels
The robust, padded carrier bag, made of water-repellent 1680D ballistic nylon, is specially designed for the square base plates (563 x 563 mm) of the Gravity lighting stands GLS331B and GLS431B. It has two carrying straps with a soft Velcro handle, a sturdy double zip and a see-through window for labels.
Product type
Stands and Tripod Accessories
Type
Transport bag
Colour
Black
Material
Nylon 1680D
Thickness of the padding
5 mm
Latch
Double zip
Width
600 mm
Height
600 mm
Weight
0,591 kg |
- Medium lighting stand with crossbeam
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Product type
Stands and Tripods
Stand surface
Powder coated
Crossbar surface
Powder coated
Holding fixture for TV Spigot
Yes
|
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don\'t need a clavilux, just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes. As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Product type Type Material Surface Color Fitting Length Stud spacing Max. load capacity Weight |
Reviews
There are no reviews yet.