Content |
The APM series are digital paging microphones equipped with a condenser microphone with cardiologic characteristics, mounted on a 30 cm long gooseneck. By means of a built-in compressor / limiter, the output level of the microphone signal is constantly maintained. The status of the reproduced signal is indicated on the front panel, to ensure the speaker that the message is clear and audible in all situations. Each console has 3 standard buttons (except the APM01 which has only PTT) with pre assigned functions: PTT (Push To Talk), Select all and Clear. All other buttons can be freely programmed, using the free APM configuration software. |
Designed for paging calls and general announcements, the PM-660D desk-top microphone comes with a large talk switch and a lock lever for easy and convenient operation. Its robust anti-vibration construction and balanced output render the microphone resistive to noise. In addition, the PM-660U microphone is equipped with a remote control switch (interlocked with the talk switch) for amplifier power on/off operation or chime activation.
Type | Moving coil microphone | Polar Pattern | Unidirectional | Rated Impedance | 600 Ω, Balanced | Rated Sensitivity | -58 dB (1 kHz, 0 dB=1 V/Pa) | Frequency Response | 100 - 10,000 Hz | Output | φ5.0 (φ0.2) | Talk Switch | 1-push-to-talk switch, 1-locking lever, Short-off type | Remote Control | 500 mA or less at 30 V DC | Finish | Microphone head: Zinc plated steel wire, gray baked paint
Main unit: ABS resin, gray | Dimensions | 100 (W) × 215 (H) × 150 (D) mm (3.94 × 8.46" × 5.91“)“ | Weight | 440 g (0.97 lb) (cord excluded) | ※ Do not keep the lock lever placed in the locked state (ON position) for a long period of time.Doing so may cause poor conductivity in the lever switch due to deterioration with age, resulting in unit malfunction.
|
The APM series are digital paging microphones equipped with a condenser microphone with cardiologic characteristics, mounted on a 30 cm long gooseneck. By means of a built-in compressor / limiter, the output level of the microphone signal is constantly maintained. The status of the reproduced signal is indicated on the front panel, to ensure the speaker that the message is clear and audible in all situations. Each console has 3 standard buttons (except the APM01 which has only PTT) with pre assigned functions: PTT (Push To Talk), Select all and Clear. All other buttons can be freely programmed, using the free APM configuration software. | The Shure KSM141 is an end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Features
- A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS
Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Suggested Applications
Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording | The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
- Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, percussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
- Pneumatic shock-mount system cuts down handling noise
- Extremely durable under the heaviest use
- Frequency response: 40 to 15,000 Hz
Frequency Range |
40 Hz to 15 kHz |
Impedance |
150 Ohms |
Load Impedance |
310 Ohms |
Sensitivity |
56 dBV/Pa (Open Circuit Voltage, 1 kHz) |
Color |
Gray |
Mounting |
5/8"-27 Female, Mic Clip (Included) |
Construction Material |
Steel, Steel Wire Grille |
Dimensions |
ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm |
Weight |
10.02 oz / 284 g |
| Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power.
Specifications
Polar Pattern: cardioid
Frequency Response: 20?20.000 Hz
Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa
Max. SPL for 1% / 3% THD: 126/130 dB SPL
Equivalent Noise Level: 33 dB to DIN 45 412
Electrical Impedance: 200 ohms
Recommended Load Impedance: >2.000 ohms
Power Requirement: 9 to 52 volts universal phantom power
Current Consumption: approx. 2 mA
Connector : 3-pin XLR
Cable Length: 1.5 m (5 ft.)
Finish: matte black
Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.)
Net / Shipping Weight: 23/192 g (0.8/6,8 oz.)
Optional Accessorires: B15, B18 |
Reviews
There are no reviews yet.