AUDAC AUAPM116 – Digital Paging Microphone for 16 Zones

741.51 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: AUAPM116 Category:
The APM series are digital paging microphones equipped with a condenser microphone with cardiologic characteristics, mounted on a 30 cm long gooseneck. By means of a built-in compressor / limiter, the output level of the microphone signal is constantly maintained. The status of the reproduced signal is indicated on the front panel, to ensure the […]

 

Read more

The APM series are digital paging microphones equipped with a condenser microphone with cardiologic characteristics, mounted on a 30 cm long gooseneck. By means of a built-in compressor / limiter, the output level of the microphone signal is constantly maintained. The status of the reproduced signal is indicated on the front panel, to ensure the speaker that the message is clear and audible in all situations. Each console has 3 standard buttons (except the APM01 which has only PTT) with pre assigned functions: PTT (Push To Talk), Select all and Clear. All other buttons can be freely programmed, using the free APM configuration software.

Weight 1.10 kg

Reviews

There are no reviews yet.

Be the first to review “AUDAC AUAPM116 – Digital Paging Microphone for 16 Zones”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDAC AUAPM116 - Digital Paging Microphone for 16 Zones removeShure MX202B/S Microflex Overhead Microphones removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removePROEL BMG-2 Microphone Base removeAKG C 451B - Condenser cardioid microphone remove
NameAUDAC AUAPM116 - Digital Paging Microphone for 16 Zones removeShure MX202B/S Microflex Overhead Microphones removeSHURE KSM44A/SL - Large Dual-Diaphragm Microphone 20Hx to 20kHz removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removePROEL BMG-2 Microphone Base removeAKG C 451B - Condenser cardioid microphone remove
Image
SKUAUAPM116MX202B/SKSM44SLPGA52-XLRH06PR00147C 451B
Rating
Price 741.51 incl. GR VAT 333.12 incl. GR VAT 938.00 incl. GR VAT 165.12 incl. GR VAT 70.00 incl. GR VAT 347.22 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Only 5 left in stock

Only 1 left in stock

In stock

AvailabilityAvailable on backorderIn stockIn stockOnly 5 left in stockOnly 1 left in stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The APM series are digital paging microphones equipped with a condenser microphone with cardiologic characteristics, mounted on a 30 cm long gooseneck. By means of a built-in compressor / limiter, the output level of the microphone signal is constantly maintained. The status of the reproduced signal is indicated on the front panel, to ensure the speaker that the message is clear and audible in all situations. Each console has 3 standard buttons (except the APM01 which has only PTT) with pre assigned functions: PTT (Push To Talk), Select all and Clear. All other buttons can be freely programmed, using the free APM configuration software.

t is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Cartridge polar pattern indicated by model number suffix:
C = Cardioid, S = Supercardioid, N = No cartridge

Available Options
    MX202B/C     Black mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
    MX202B/S     Black mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/C     White mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/S     White mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/N     White mini-condenser mic, w/cable, in-line preamp, stand adapter, No Cartridge
    MX202BP/C     Black mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier
    MX202BP/S     Black mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier
    MX202BP/N     Black mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge
    MX202WP/C     White mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier.
    MX202WP/S     White mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier.
    MX202WP/N     White mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge

KSM44A Multi-Pattern Dual Diaphragm Microphone Premium microphone with three polar pattern options (cardioid, omnidirectional, bidirectional).

Features

  • Prethos® Advanced Preamplifier Technology: Class A, discrete, transformerless preamplifier provides  transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions.  
  • Groundbreaking specifications: 4dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
  • Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
  • Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior frequency response
  • Premium electronic components and gold-plated internal and external connectors
  • Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
  • Integrated three-stage "pop” protection grille reduces plosives and other breath noise

    Type Condenser (externally biased)
    Frequency Response 20 to 20,000 Hz
    Polar Pattern Cardioid, Omnidirectional, Bidirectional
    lmpedance 50 ohms
    Phantom power required? 11–52 V DC phantom power (IEC-61938) 5.8 mA, maximum


OVERVIEW

Cardioid dynamic kick drum mic with swivel mount and cable.

The PGA52 is a professional quality kick drum microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning.

FEATURES
  • Mountable microphone featuring swivel joint with quick-release latch for kick drum
  • Dynamic cartridge (does not require phantom power) with cardioid polar pattern
  • Tailored cartridge design for low-frequency clarity, including on bass amps
  • Includes PGA52, zipper pouch and user guide
  • XLR to XLR mic cable included

Professional table microphone, high sensitivity condenser microphone capsule, flexible gooseneck, illuminated ring to indicate operating condition, and on/off switch. Perfect for all PA applications, such as conference and paging. It can be powered by battery or as by Phantom power. The base is equipped with 8 meters of cable XLRF-XLRM and XLRF-mono jack adapter.

This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip. For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone. The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments. The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original. Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout. Three-year warranty. Specification Polar pattern: cardioid Frequency range: 20?20,000 Hz Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa) Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB) Equivalent noise level: 18 dB-A to DIN 45 412 Signal/noise ratio (A-weighted): 76 dB Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz Electrical impedance: Recommended load impedance: >1.000 Ohms Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15 Current consumption: Connector: 3-pin male XLR Finish: satin nickel plated Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.) Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.) Standard accessories: W 90 windscreen, SA 40 stand adapter
Weight1.10 kg0.20 kg1.00 kg0.80 kg0.70 kg0.76 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.10 kg
Weight 0.20 kg
Weight 1.00 kg
Weight 0.80 kg
Weight 0.70 kg
Weight 0.76 kg