Content |
The CMP30 is a All-in-one audio source device which accommodates three different kinds of audio sources into one single device. it combines a CD-Player, MP3 player and AM/FM tuner into one single rack space 19・E housing. On the front a CD slot, a USB slot and a SD/MMC memory card slot are provided. This makes it possible to play regular audio CDs as well as MP3 files from either CDs, USB memory sticks or SD/MMC memory cards. There are two separate stereo outputs provided on the rear side, one for the CD & MP3 player while the other one is used for the AM/FM tuner. Because of these two separate stereo outputs, these two devices can operate simultaneously. This feature can be useful for Multi-Zone systems where multiple audio input devices are required. An rs232 control port makes the operation possible from external control devices such as home automation systems from AMX and crestron. - Model name: AUCMP30
- Control: RS232
- Mounting: 19"
- Unit Height: 1U
- Power Supply: 240 V AC / 50 - 60 Hz
- Dimensions (W x H x D): 483 x 44 x 380 mm
|
- 6CD CHANGER(MP3/WMA)
- Magazine TYPE Reliable Mechanism
- DOT MATRIX design VFD Display
- CD/CD-R/CD-RW/MP-3/WMA File Readable
- XLR (MONO/STEREO) & RCA Analog output
- Coaxial & Optical Digital Ouput
- AMX & CRESTRON Interface(RS-232C)
- IR Remote Control
- Audio Channel : 2 Channels
- Frequency Response : 20Hz~20KHz ±1dB
- Distortion : Less than 0.05%
- Signal-to-Noise Ratio : Better than 90dB
- Analog Output Level(Variable) :
RCA : Nominal 2V(+9dB/-30dB)
XLR : Nominal 4V(+9dB/-30dB) - Head phone Output Level : 1.5V at max (load impedance 32 Ω)
- Quantization : 24bit
- Sampling Frequency : 44.1kHz
- Power Source : 100~120VAC or 220~240VAC; 50/60Hz, 24VDC
(supplied AC mains transformer depends on country requirements) - Power Consumption : 18W (standby : Less than 1W)
- Weight : 6.2kg
- Dimensions (WxHxD) : 482x88x380mm / 19x3.5x14.9in
|
RECORDING / PLAYBACK GENERAL Recording Media CD-R, CD-RW Sampling Frequency / Quantization 44.1kHz / 48kHz, 16bit 44.1kHz / 48kHz / 88.2kHz / 96kHz, 24bit File System CD-DA (CD rec/repro) ISO9660 (CD-ROM, repro. only) UDF ver.1.02 (CD-ROM, rec/repro) File Format CD-DA, BWF-P S/N 100 dB (typical) Dynamic Rage 100 dB (typical) Reference Level -12dBFS / -20dBFS T.H.D. less than 0.01 % (typical) INPUTS/OUTPUTS Analog Input (L/R, balanced) Connector XLR-3-31 type x2 Input Impedance 10k ohm or more Standard Input Level +4dBu Maximum Input Level +24dBu Analog Input (L/R, unbalanced) Connector RCA pin jack x2 Input Impedance 10k ohm or more Standard Input Level -10dBV Maximum Input Level +10dBV Analog Output (L/R, balanced) Connector XLR-3-32 type x2 Loaded Impedance 10k ohm or more Standard Output Level +4dBu Maximum Output Level +24dBu Analog Output (L/R, unbalanced) Connector RCA pin jack x2 Output Impedance 10k ohm or more Standard Output Level -10dBV Maximum Output Level +10dBV Phones Connectors Ø6mm Stereo Phone Jack x1 Loaded Impedance 8ohm or higher Maximum Output Level 100mW (32ohm) Digital Input (balanced) Connector XLR-3-31 type x1 Input Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU) Automatic detect Digital Output (balanced) Connector XLR-3-32 type x1 Output Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU) Switchable USB (for USB Keyboard only) Connector USB series A receptacle x1 GPI (for fader start) Connector Ø6mm Phone Jack x1 Format Short : Start / Open : Stop PHYSICAL Power requirements AC 100V – 240V, 50/60 Hz Power consumption 14 W Weight (without package) 4.8 kg Max. dimensions 482 (W) x 93.5 (H) x 321 (D) mm
Weight: 3 lbs. 9 oz.
Operating temperature: +5°C to +35°C
Operating humidity: 25% to 85%, non condensing
Storage temperature: -20°C to +60°C
Storage humidity: 25% to 85%, non condensing
|
The DN-F350 audio media player utilizes Bluetooth, SD/SDHC, USB and 3.5mm inputs for playing digital audio from solid-state media and personal devices. The space-saving 1RU design is perfect for commercial installations, fitness studios, bars and restaurants. Pitch and tempo control with a range of +/- 15% can be activated for dance and fitness applications. In addition, a front-mounted XLR combo jack with gain control accommodates a microphone or line level source for added versatility. Phantom power (48VDC) is available for condenser microphones, while balanced and unbalanced outputs are provided for contractor-friendly installations.
- Plays content from SD/SDHC, USB/HDD, 3.5mm and Bluetooth
- Mic/Line XLR front panel combo jack input with gain control and 48VDC phantom power
- Pair up to (8) Bluetooth devices for playback
- Balanced XLR and unbalanced RCA outputs
- Control via front panel or included IR remote
- Pitch and tempo control +/- 15%
-
Audio Specification
- Frequency Response: 20 Hz – 20 kHz (+/- 1.0dB)
- Dynamic Range: > 85 dB
- Signal-to-Noise Ratio: > 90 dB (A-weighted)
- Variable Pitch/Tempo Control: ±15%
-
Audio File Formats Supported
- WAV (44.1k, 16bit)
- MP3 (44.1k, from 64 to 320 kbit/s)
- FLAC
- MP2
- M4A (without DRM protection)
- WMA (without DRM protection)
- AIFF
-
Bluetooth Specification
- Version: v4.0 / v2.1 + EDR
- Profile: A2DP, AVRCP, HFP, HSP, SPP, OPP
- Range: Up to 50m
- Maximum Transmission Power: Class 2, 4 dBm
- Frequency: 2400 – 2500 MHz
-
Connectors
- (2) Balanced XLR outputs
- (1) Unbalanced RCA stereo output pair
- (1) Balanced XLR-1/4 input
- (1) 1/8” Aux (3.5 mm) input
- (2) USB ports
- (1) 1/4" Headphone output
- (1) IEC power input
-
General
- Input Voltage: 100–240 V, 50/60 Hz
- Fuse: 1A
- Consumption: 17 W
- Dimensions (WDH): 16.9 x 7.9 x 1.7” (430 x 200 x 43.6mm)
- Weight: 5 lbs. (2.3kg)
|
Reviews
There are no reviews yet.