AUDAC AUCS32 CS3.2 – In-wall Speaker

The CS3.1 Cuban Speaker features a 3 1/8" full range loudspeaker with a shielded neodymium magnet. The CS3.2 Cuban Speaker features a 1" soft dome tweeter and a 3 1/8" full range loudspeaker with a shielded neodymium magnet. They are capable of producing up to 20 W RMS, with a maximum of 40 W. The standard speaker impedance is 8 Ohm, but through an additional 100 V Line transformer, it also can be used on 100 V PA systems.

• Model Name / Type: AUCS3.2 / cuban speaker
  
• Max . Power: 40 W
• RMS Power: 20 W
• Sensitivity (1 W / 1 m): 86 dB
• Max. SPL: 102 dB
• Impedance: 8 ohms
  
• Frequency Response (±3 dB): 180 Hz - 20 kHz
• Dimensions (W x H x D): 192 x 122 x 106 mm

PRICE PER UNIT

S1X

The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.

The smallest reference speaker

The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.

The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

PRICE PER UNIT

S2X

The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.

The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.

Review at a glance: "Sonic sensation“

“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)

“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)

Descriptions:

The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.

Applications:

Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate

FEATURES:

Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction

Weight: 35