AUDIEN BT-221TB 2.5″ Speaker 8OHM 20W PEAK 100V PAIR

audien-logo-speakers-audio-cables-microphones
All products by AUDIEN

€44.70 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: BT-221TW Category:
Max Power :   20W Frequency Resp. :   200-20000Hz Sensitivity :    88dB Impedance :  100V / 8OHM SPEAKER :    2,5“ Dimensions (WHD) :     96x139x139mm

 

Read more

Max Power :   20W
Frequency Resp. :   200-20000Hz
Sensitivity :    88dB
Impedance :  100V / 8OHM
SPEAKER :    2,5“
Dimensions (WHD) :     96x139x139mm
Weight 1.20 kg

Reviews

There are no reviews yet.

Be the first to review “AUDIEN BT-221TB 2.5″ Speaker 8OHM 20W PEAK 100V PAIR”

Your email address will not be published. Required fields are marked *

Quick Comparison

AUDIEN BT-221TB 2.5" Speaker 8OHM 20W PEAK 100V PAIR removeDsppa DSP-660B 45W Outdoor Speaker removeECLER eRK108 Outdoor speaker 100V removeCROWN CDI-4000 Power amplifier 2X1200W/4ohm, 2Χ1000W/70V removeBITTNER AUDIO XV600-2x300W-100V POWER AMPLIFIER removeBIAMP ROCK-20 Speaker Rock remove
NameAUDIEN BT-221TB 2.5" Speaker 8OHM 20W PEAK 100V PAIR removeDsppa DSP-660B 45W Outdoor Speaker removeECLER eRK108 Outdoor speaker 100V removeCROWN CDI-4000 Power amplifier 2X1200W/4ohm, 2Χ1000W/70V removeBITTNER AUDIO XV600-2x300W-100V POWER AMPLIFIER removeBIAMP ROCK-20 Speaker Rock remove
Image
SKUBT-221TWDSP-660BeRK108CDI-4000XV600H00AP00053
Rating
Price€44.70 incl. GR VAT€231.25 incl. GR VAT €195.00 incl. GR VAT €2,215.00 incl. GR VAT €1,277.20 incl. GR VAT€278.00 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentMax Power :   20W Frequency Resp. :   200-20000Hz Sensitivity :    88dB Impedance :  100V / 8OHM SPEAKER :    2,5“ Dimensions (WHD) :     96x139x139mm

Dsppa DSP-660B 15W Outdoor Speaker

Full-range Speaker:5“x2
Normal Power:15W

Line Voltage:70-100V
Sensitivity(1m,1W):90dB
Max Sound Pressure Level(1m):100dB
Dimensions:195x765x135mm
Weight:6.5kg
 

Weight

 5 kg
Woofer Diameter 8
Material Polyresin
Transformer 15W (100V/70V)
Dimensions (WxHxD) 325x290x270
Sensitivity (dB@1m 1W) 89dB
Frequency response (-6 dB) 35Hz - 20KHz

 

In-ground Loudspeaker Cabinet ECLER ESSENTIALS eRK108 is an outdoor and cost-effective ground loudspeaker, ready to be installed in gardens, theme parks, leisure facilities, etc. It features an 8" woofer, 0.5" tweeter and 70/100V transformer.   Key Features:
• IP65 outdoor rated loudspeaker
• 70/100 V (15 W)
• 8” woofer + 0,5” tweeter
• Stripped wire connection


Applications:
• Theme parks
• Gardens, nature parks and urban spaces
• Leisure centers
• Health and sport centers
• Museums
• Residential buildings, outdoor areas

Specifications

Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) 100 dB
Damping Factor (8 ohm): 20 Hz to 400 Hz > 500
Input Stage Input is electronically balanced and employs
precision 1% resistors
AC Line Current CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A
At idle: Draws no more than 45 watts.
Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB
Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Dual
Bridge mono		 2–8 ohms
4–16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output) CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB
Sensitivity (at 8 ohm rated output) 1.4V
Maximum Input Signal +22 dBu typical
Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V-240V, 50/60 Hz
Ventilation Flow-through ventilation from front to back
Cooling Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D
Net Weight, Shipping Weight 19 lb (8.6kg), 22 lb (10.0 kg)

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 600:  2x 300 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  19 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

  • Speaker Rock 2way 6.5''
  • 60Hz-20KHz
  • ισχύς dynamic 32W@8Ω
  • 2.5,5,10,20W@100V
  • sens 98dB @1W/1m, max SPL 113dB
  • wall mount
  • IP64
  • 260x200x280mm
  • 3.6 Kg.
Weight1.20 kg7.00 kg5.00 kg10.00 kg19.00 kg3.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.20 kg
Weight 7.00 kg
Weight 5.00 kg
Weight 10.00 kg
Weight 19.00 kg
Weight 3.60 kg

Related products