AUDIENT ID-14 Audio Interface

• 2 x Class-A Audient Console Mic Preamplifiers
• High Performance Burr Brown AD/DA Converters
• 1 x Discrete JFET Instrument Input
• Main Speaker Output
• Independent Class-AB Headphone Output
• Full Monitor Control Functionality (software controlled)
• ADAT Input for Expandability
• Low Latency DSP Mixer
• iD ScrollControl Mode
• All-Metal Enclosure
• USB2.0 Bus Powered
• 24bit/96khz

Features:

USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out

Technical Specifications

Microphone Inputs:    Female XLR Pin 2 Hot
Input Impedance:    3kΩ balanced
Phantom Power:    +48 Volts
Maximum gain:    +58 dB
E.I.N. (at max gain):    -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level:    +21 dBu at minimum gain
Frequency Response:    +0/-1 dB, 20Hz - 20kHz
THD+N:    +18 dBu maximum
Impedance:    32Ω Balanced, 16Ω Unbalanced
Headphone Output:    1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface:    5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate:    44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range:    A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements:    12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU

MINIMUM SYSTEM REQUIREMENTS - Mac

    * OS X Leopard 10.5.8 or Snow Leopard 10.6.3
    * 1 GB RAM (2 GB recommended)
    * 6 GB free disk space
    * Intel® processor (no PowerPC® support)
    * One native USB port

MINIMUM SYSTEM REQUIREMENTS - PC

    * Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit Native, or Windows 7 64-bit Native
    * 1 GB RAM (2 GB recommended)
    * 5 GB free disk space
    * One native USB port

What's in the Box?

    * Mbox Mini interface
    * Pro Tools LE 8 software DVD-ROM installer (includes electronic versions of user guides, plus software plug-in bundle)
    * Mbox user guide
    * Registration information card
    * USB cable

Computer Based Recording Packages 

Computer-Based Recording Packages For All Players Of Musical Instruments 

The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.

Turn your computer into a powerful digital audio workstation with eight mic inputs. Or add eight high-quality mic/instrument inputs to your current system.

The 8pre FireWire audio interface delivers everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation. The 8pre provides eight microphone/instrument preamps with pristine 96kHz analog recording and playback, combined with 8 channels of ADAT optical digital I/O. Expand your system by connecting additional 8pres or other MOTU FireWire audio interfaces.

Use the included CueMix™ software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. Two ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at any sample rate up to 96kHz.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 8preʼs main outs or headphone jack — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console™ software, just like a large studio console.

The 8pre includes a 16-channel MIDI interface. Simply plug in your FireWire cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software.

The 8pre provides cross-platform compatibility with Mac OS X 10.3 or higher, Windows XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

The 8pre is really two products in one. When it is not connected to a computer via FireWire, the 8pre functions as an eight-channel analog to digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler or even another 8pre via the optical "lightpipe” connection to add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100% pristine sound is maintained, down to the very last sample.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

The 8pre is the perfect way to instantly add eight more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828mkII, 896HD or Traveler, the 8pre inputs appear directly in the host interface's CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit — even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.

If you have a 2408mk3, digital mixer or other audio device that supports 96kHz optical and also has two optical inputs, the 8pre connects to it via both optical ports to provide a full eight channels of analog to optical conversion at the 88.2 or 96kHz sample rates.

Yamaha GO46 FireWire Interface

The GO46 FireWire interface from Yamaha provides a means to stream
high-quality 24-bit/192kHz digital audio and MIDI into a computer. Connect
it to a laptop, and you've got a rugged and portable interface that can go
anywhere you go, hence the name "GO46." This box is the ideal interface
for great-sounding audio on the "GO."

Yamaha GO46 FireWire Audio/MIDI Interface At a Glance
Premium Mic Pres and Inputs
FireWire Connectivity
Flexible Connectivity Including S/PDIF, Insert Points, and MIDI

Premium Mic Pres and Inputs
The GO46 features combo mic/line terminals (for both XLR and phone jack)
 on the front panel. Phantom power is also available and independently
switchable for each input channel. In other words, you can use a condenser
microphone on channel 1 with phantom power switched on to capture the
delicate sounds of a vocal while simultaneously recording an electric/acoustic
guitar plugged into channel 2. These combo inputs are captured at up to 24-bit/
192kHz resolution. This pro-level quality makes the GO46 perfect for any type
of recording, and allows you to capture the full details and nuances of the
original source - from the breathiness of a vocal to the delicate finger slides of
an acoustic guitar performance.

FireWire Connectivity
The FireWire equipped GO46 not only offers the convenience of one plug
connection to a computer, but the GO46 can be powered via bus power
from the FireWire port. Connect the GO46 to the FireWire terminal of a
laptop and you've got and extremely powerful and portable recording studio
that will fit in a backpack. This is also great for using the GO46 in places
where electrical outlets can be scarce, like local clubs.

Flexible Connectivity Including S/PDIF, Insert Points, and MIDI
In order to maximize the flexibility of the GO46, Yamaha included virtually
any kind of connection you might need on location recording gigs. Two
insert points allow for connection to outboard gear like compressors or EQs.
MIDI in/out allows for connection of MIDI sound modules or instruments.
S/PDIF jacks are great for inputting digital signal from another interface or
throughputting the GO46 signal to a digital mixer, separate digital recorder,
or any other digital device.

Yamaha GO46 Features:
FireWire (IEEE1394)
Durable aluminum die cast body
2 x Premium Quality Mic pre amps with XLR/Combo connectors
Phantom Power ( +48V ) switch for each connector
2 x Insert connectors for analog inputs
1 MIDI In/ 1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
Included Cubase LE, HALion SE, and Groove Agent SE