| Content | Audient Nero
Monitor Controller
4 sources selectable:
- 2 x Stereo Line Level Inputs (6.3 mm jack)
- 1 x Stereo Cue Mix Inputs (6.3 mm jack)
- Alt Inputs (3.5 mm mini jack, stereo RCA optical or coaxial S/PDIF inputs)
3 x Stereo Monitor Outputs
Switchable subwoofer output
4x headphone output; built-in talkback microphone
XLR input for external talkback microphone
Dim, cut, mono & polarity function
LED level meter
Dimensions: 320 x 180 x 100 mm
Weight: 2.2 kg | CMC2 - Compact Monitor Controller
COMPACT, ACCURATE & AFFORDABLE.
The CMC2 is a compact monitor controller that has been designed to provide the same top quality audio, transparency and accuracy of Drawmer's other monitor controllers, such as the MC2.1 and MC3.1, whilst retaining all the necessary features that the smaller project studio would require without the cost of the advanced features that would seldomly be used.
Can you trust the audio that your current monitor controller is providing? Is it colouring the sound? For all Drawmer monitor controllers it is imperative that what you record is exactly what you hear. The active circuit has been designed to faithfully produce the audio signal whilst removing many of the problems that a passive circuit will bring. There is one thing that should always be absolutely guaranteed - that you can rely on the accuracy of your monitor controller.
Accurate & Transparent
With the same Drawmer pedigree as the MC2.1, the CMC2 circuit is just as transparent and accurate. It's switches and paralleled custom-quad knobs have excellent channel matching, a smooth feel.
You hear exactly what you've recorded!
Multiple Connections
The CMC2 is very well connected: with 2 Stereo balanced jack inputs, plus a 3.5mm jack for your Smartphone/MP3 Player, with variable level control. It supports 2 sets of stereo monitors plus a sub-woofer, each with individual switches so you can activate them in any order, especially useful for A/B comparisons.
In addition, it has a professional quality headphone output with a separate amplifier and level control, that provide the same audio quality and mix checking as the CMC2 does through the speakers.
Key Mix check features such as Phase Reverse, Mono, Dim & Mute are also included, to enable you to examine the quality of your recordings with ease.
Compact
The CMC2 packs a lot of features into a small package. With a footprint of just 18x16cm and a very low profile the CMC2 won't hog your desk space like some other controllers do. And if your on the move it's small enough to pop into a bag to take anywhere.
Tough & Secure
Whilst being smart and stylish the rugged, all steel enclosure will withstand the knocks and bumps of the studio, and, coupled with the high quality components used, the CMC2 is built to last. In addition, a Kensington security slot provides protection from thieves.
Features:
- Ultra low noise and transparent circuit design.
- Source switches can be active in any combination. 3 Inputs in Total - Two on ¼” balanced jacks and One 3.5mm Front Panel Aux for your Smartphone/Mp3 Player.
- 2x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons.
- Timed relay protection on all speaker outputs to prevent power up/down bangs.
- A large volume knob incorporating a parallelled custom quad pot for excellent channel matching and smooth feel.
- A Headphone Amplifier with Individual Level Controls with easy access to the jack on the front.
- Front Panel 3.5mm AUX Input with Level Control for connecting MP3 player, smartphone or tablet etc.
- Mix Checking facilities Include Dim, Phase Reverse and Mono, as well as an easy access Mute switch.
- Kensington security slot (also called a K-Slot or Kensington lock).
- Very low profile desktop enclosure with a footprint of just 18x16cm.
- Stylish and Rugged Enclosure will withstand the knocks of the studio.
|
The Behringer Monitor2USB is a monitor controller and USB audio interface designed for home and project studios. It pairs a large VCA control knob for your overall output level with the ability to select among three sets of active studio monitors, as well as two sets of headphones. With its USB jack, you can connect your computer straight to the device so that you may play music from your digital library, or you can mix straight from your DAW. Through its XLR inputs, you can route analog sound, balanced or unbalanced.
The VCA amplifier provides several benefits. For example, it allows DC current to flow through the volume control, rather than the audio signal, and thus, bypasses any DC-related signal degradation. This also helps in making sure your stereo image doesn’t drift as you crank the volume knob; anyone who’s experienced in monitor controllers knows this can be a problem—a problem mitigated in the Monitor2USB. The volume knob itself is quite large, and this too serves a function: Such a large size allows for more precision as you turn the control, so you can achieve minutely specific level adjustments, which might be necessary as you switch from monitoring post-production projects to music mixes.
You can use its three sets of outputs in a variety of ways—for instance, you can hook up two monitors and a subwoofer, or three sets of monitors, one of which can serve as your dedicated mono check. On the headphone outputs, a crossfeed control mimics the stereo experience of sitting in front of your speakers by feeding a miniscule amount of signal from the right to the left and vice versa. Amongst other benefits, this feature helps mitigate ear fatigue over long sessions. Mono and Dim buttons are on hand to help you in the mixing process. Included with the Monitor2USB are a power cable and a full, complimentary copy of Tracktion—a DAW to help you in your recording, editing, and mixing journeys.
Key Features at a Glance
- Large volume knob with VCA control for precise level adjustments
- Built-in stereo USB audio interface
- 2 high-quality stereo inputs
- 3 independent monitor outputs to connect two stereo monitors and one mono monitor
- 2 headphone amplifiers with separate volume controls
- Crossfeed control emulates the stereo speaker panorama when listening through your headphones
- Convenient Mono and Dim functions
- Included eco-friendly power supply
- Designed and engineered in Germany
| Analog Inputs |
2 x XLR (input set 1)
2 x XLR (input set 2) |
| Input Impedance |
20 kOhms balanced, 10 kOhms unbalanced |
| Input Sensitivity |
Input Set 1: +4 dBu
Input Set 2: +4 dBu / -10 dBV |
| Analog Outputs |
Monitor Out A: 2 x XLR, balanced
Monitor Out B: 2 x XLR, balanced
Monitor Out C: 1 x XLR, balanced
Phones: 2 x 1/4" TRS, phone type |
| USB |
USB 1.1, type-B |
| D/A Conversion |
44.1 / 48 kHz |
| Frequency Response (-3 dB) |
< 10 Hz to 120 kHz |
| SNR |
85 dB at 0 dB, A-weighted |
| CMRR |
> 50 dB at 1 kHz, 0 dBu input level, unity gain |
| THD+N |
0.03% at 1 kHz, 0 dBu input level, unity gain |
| Crosstalk |
> 75 dB at 1 kHz |
| Attenuation |
Dim: -15 dB |
| Power Supply |
100 to 240 VAC, 50 / 60 Hz |
| Dimensions (H x W x D) |
3.3 x 8.5 x 7.8" / 84.0 x 216.0 x 199.0 mm |
| Weight |
3.3 lb / 1.5 kg |
| Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
| Master your domain with the Behringer Xenyx CONTROL2USB studio monitor controller. Whether recording, mixing, or mastering, the CONTROL2USB places you firmly in command with master volume, talkback, source selection, and monitor control. Easily toggle between up to three sets of studio monitors and four stereo input sources. There's even a monitor mix input for your DAW! Keep the lines of communication open between you and the artist with the built-in talkback function. Mono, mute, and dim functions are right at your fingertips. The CONTROL2USB employs VCA technology, ensuring precise level adjustments. The infinitely useful Behringer Xenyx CONTROL2USB studio monitor controller also functions as a USB audio interface.
Behringer Xenyx CONTROL2USB Studio Monitor Controller at a Glance:
- Ample I/O provides monitor options galore
- VCA technology ensures precise level adjustments
- Convenient built-in USB audio interface
Ample I/O provides monitor options galore
Your mix isn't complete unless it sounds great in the studio, car, and on bass-challenged speakers and earphones. The Behringer Xenyx CONTROL2USB toggles between up to three sets of studio monitors, equipping your studio with monitor options galore. Utilize high-quality nearfields to get your mix started. Add or remove a subwoofer to check your low end. Then reference your mix with cube-style speakers. There's also a monitor mix input for your DAW. A pair of individually adjustable headphone outputs provides even more monitoring flexibility. The CONTROL2USB accommodates up to four stereo input sources, so setting up reference sources is a piece of cake.
VCA technology ensures precise level adjustments
Because it employs high-end Voltage Controlled Amplifier (VCA) technology instead of inexpensive resistive faders, the Behringer Xenyx CONTROL2USB is incredibly precise. The engineers at Sweetwater have found that you can set levels quickly and accurately with the CONTROL2USB's large control knob. Make minute adjustments with ease. The CONTROL2USB actually controls the voltage that drives the amplifier rather than simply controlling how much signal passes to it. The result is faithful sound reproduction that you can trust.
Convenient built-in USB audio interface
The Behringer Xenyx CONTROL2USB's built-in USB audio interface creates an excellent centerpiece for your studio without requiring additional hardware or drivers. Just plug into one of your computer's spare USB ports and get to work.
- Volume controller, source selector, monitor switcher and talkback in one device
- Large, illuminated volume knob
- Integrated USB audio interface
- 4 stereo inputs with independent level
- Additional monitor mix input for DAW
- 3 independent and adjustable stereo monitor outputs
- Mono, mute and dim function
- Built-in talkback microphone
- With phono preamp for record players
- 2 Separately adjustable headphone outputs
- 12-Segment LED display with input / output switch
- "Planet Earth" power supply, 100 - 240 V
- Depth (mm): 198
- Height (mm): 87
- Width (mm): 389
- Product Dimensions (mm): 87x389x198
- Net weight (kg): 2.4
- Colour: Black
- Packing: Retail Box
- Weight (kg): 2.4
|
MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors.
\"Fully passive\" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4\" TRS connectors, one with both unbalanced RCA and unbalanced 1/8\" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4\" TRS plus unbalanced 1/8\" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out!
Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.
Features
- 2x mono balanced 1/4\" TRS input (input A)
- 2x mono unbalanced RCA input (input B)
- 1x stereo unbalanced 1/8\" mini jack input (input B)
- 2x mono balanced XLR output (output A)
- 2x mono balanced / unbalanced 1/4\" TRS output (output B)
- 1x stereo unbalanced 1/8\" mini jack output (output B)
- selected high quality potentiometer for passive volume control
- A/B input selection switch
- L/R switch to swap left & right audio channels
- independent A and B buttons to enable and disable the outputs
- mono downmix button (mixes left to right channel and right to left channel)
- mute button to mute output signal instantly
|
Reviews
There are no reviews yet.